Free Horsepower: Win a C&L Cold Air Intake & Bama Performance Tuner Enter to Win
1-888-332-7930 M-F 9-9 EST, Sat 9-5:30 EST

Free Shipping on Everything. Seriously. Details

BBK Billet Mass Air Meter for Cold Air Intake and 19lb Injectors (94-95 GT)

8 Reviews
Our Price

$249.99

  • Item #56177
  • MPN #80075
  • Market Price $287.49
  • You Save 13% ($37.50)
In Stock Ships same business day.
Free Shipping on Everything
Customer Photos
Features
  • No More Pegging
  • Improves Airflow
  • 76mm Mass Air Meter Housing
  • Electronically calibrated mass air sensor included
  • Pre-calibrated for 19lb injectors
  • CNC machined billet aluminum housing
  • Fits 1994-1995 EFI 5.0 Mustangs with aftermarket cold air intake
Description
No More Pegging. The BBK 76MM Mass Air Meter Sensor is great for modified and custom applications where the stock mass air meter "pegs" due to increased air flow. Improves Airflow and Horsepower. The stock factory Mass Air Flow Meter (a.k.a. MAF for short) is only 55mm and flows a weak 550 cfm, where as the BBK MAF is 76mm and flows well over 700cfm to produce up to an additional 15hp at the rear wheels.

Pre-calibrate. This BBK 76mm Mass Air Meter Housing is already calibrated for use with 19lb fuel injectors saving you time and frustration.

Billet Aluminum Housing. CNC machined to exact specifications from high quality 6061 T6 billet aluminum for accuracy, this BBK Performance Mass Air Meter Housing is polished to a bright brilliant shine for impressive under hood styling.

Application. The BBK Performance 76mm Mass Air Meter is specifically designed for use in the 1994 to 1995 5.0 EFI Mustangs with 19lb fuel injectors and an aftermarket cold air intake installed. Does

not work on SVT Cobra models.

Mustang Fitment: 1994 1995 Details

What's in the Box
  • (1) Mass Air Meter
Installation Info
Fitment
  • GT - 94, 95

Fits EFI 5.0L V8's Only. Does <strong>not</strong> work on SVT Cobra models

Most Helpful Reviews View All

Overall Rating 4.6/5 Write a Review
5/5
My Mustang mods

Yesterday I installed the 70mm throttle body, 76mm MAF with the chip.I took my time and got it istalle witth no problems. It started right up!! Today it was time to see what I got myself into. Burned rubber

Read More
Helpful (2) (0)

5/5
BBK MAF

THE ONLY REASON I DID NOT GIVE IT FIVE STARS ALL THE WAY AROUND IS BECAUSE I DON'T HAVE A GOOD TUNE ON MY CAR YET, SO I'M SURE WHEN I DO THE GAINS WILL BE THAT MUCH GREATER. EXTREMELY WELL MADE PRODUCT

Read More
Helpful (1) (0)

Customer Photos (2) View All

You Might Also Like

Q & A (3 Questions, 7 Answers) Ask a Question

Could this work with a 94 V6 Mustang? If i were to get this with an after market cold air intake kit and had this Mass air meter onto the Intake, would it still work just as good? , I need to know soon i'm ordering as soon as possible !

Mustangknow Year: 1994 Model: V6

Good Question (0) (0)
  • Unfortunately it is not meant for the v6's.

    Helpful (0) (0)

    dron Year: 1999 Model: GT

Show 1 more answer Answer This Question

Can this MAF be used with the stock injectors or is it recommended to buy new ones? Im wanting to add a cold air intake with a 70 mm throttle body and possible sct chip. Wanting to know if this will be ok an if it is worth buying or just keep the stock maf.

cole6538 Year: 1994 Model: GT

Question Resolved
Good Question (0) (0)
  • Your stock injectors are 19lbs so this will work just fine

    Helpful (0) (0)

    Skiddleme Year: 2005 Model: GT

    Top 100 Contributor

Show 3 more answers

if I upgrade my injectors can I tune this one to bigger injectors or is it set on the stock size ones?

JRB1995GT Year: 1995 Model: GT

Good Question (0) (0)
  • The best way to go is to buy the MAS to match your injector size. You can change the air tubes but you don't always get the same results as you do by matching injector to MAS size. Hope this helps.

    Helpful (0) (0)

    NHRA40 Year: 1994 Model: Cobra

    Top 1000 Contributor

Answer This Question

Reviews (8) Write a Review

  • 5 Stars .62 62%
  • 4 Stars .38 38%
  • 3 Stars 0 0%
  • 2 Stars 0 0%
  • 1 Stars 0 0%
4.6

out of 5 stars

8 Customers Recommend this Product

Installation Time:Less than 1 Hour

  • Performance Gain: 4.125 4.1/5
  • Fit: 4 4/5
  • Bang For Your Buck: 3.875 3.9/5
Filter By Sort By
  • 5/5

    My Mustang mods

    July 02, 2013

    Yesterday I installed the 70mm throttle body, 76mm MAF with the chip.I took my time and got it istalle witth no problems. It started right up!! Today it was time to see what I got myself into. Burned rubber up hill! No hesitation and is very perky on the lowest setting. The car runs hotter, but gets up and goes. I hope to cruise out east here on Long Island this week end and have some fun! The parts fit and were easy to install. I would recommend these mods for sure!

    Midnight94

    Year: 1994 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 4 New York

    Helpful (2) (0)

  • 5/5

    BBK 76mm Mass air meter

    September 29, 2013

    This was a very simple install but I had to shorten my cold air ntake because the unit was about 1 1/2 inches longer than my old mass air. No problem making it fit. I now wish I would have went with the 24lb senser since I found my injectors are bad and have to change them anyway. All in all easy to install and some but not much performance gain. It cost money to go fast.

    NHRA40

    Year: 1998 Model: Cobra Driving Style: Street / Strip 'Stangs I have owned: 5 Blandon, PA, USA

    Helpful (1) (0)

  • 5/5

    BBK MAF

    July 01, 2013

    THE ONLY REASON I DID NOT GIVE IT FIVE STARS ALL THE WAY AROUND IS BECAUSE I DON'T HAVE A GOOD TUNE ON MY CAR YET, SO I'M SURE WHEN I DO THE GAINS WILL BE THAT MUCH GREATER. EXTREMELY WELL MADE PRODUCT (AS WITH ALL BBK IMO), AND EASY TO INSTALL, LOOKS GREAT TOO!

    JJC1976

    Year: 1994 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 3 Fountain, CO, USA

    Helpful (1) (0)

  • 4/5

    Great bolt on performance upgrade

    December 22, 2012

    BBK Billet Mass Air Meter for Cold Air Intake and 19lb Injectors (94-95 GT) is a great bolt on upgrade. I have a BBK COI and MSD performance coil, the Mass Air meter works great, when I step on the gas you can instantly feel more air being force into the engine, I can definitely feel an increase in hp. Im excited to get the BBK throttle body and then a performance chip. Hoping to get my 95 V8 GT to really be a sleeper after all of this. I definitely recommend buying one of these mass air meters, you can really feel a difference

    Karagos95GT

    Year: 1995 Model: GT Driving Style: Street / Strip 'Stangs I have owned: 1 Worcester, MA, USA

    Helpful (1) (0)

  • 5/5

    Nothing But Awesome!!!

    June 10, 2013

    I know this term, AWESOME, gets over used but there is no better way to describe the new experience of this BBK MAF meter. Installed it on my '94 GT in less than 1 hour. Went for a ride and man was I happy. The sound of power can be heard by the massive amounts of airflow you can actually hear being sucked into the throttle body(BBK of course) that enters via the cold air intake(BBK of course). The feel of power is felt by the rapid gain of speed through out the entire acceleration range! Have I mentioned AWESOME? Thanks AM and BBK. You guys are great!

    JD53

    Year: 1994 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 1 Bradenton, FL, USA

    Helpful (1) (1)

  • 5/5

    Way better than stock.

    September 07, 2014

    Old MAF was going bad, had no power and was running like pooop. This MAF looks realllly nice. Good quality parts, and now i do not run lean and feels like more power with supporting mods. Would of rather gotten it on sale. But it is billet.

    Bmad94

    Year: 1994 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 2 Southern California

    Helpful (0) (0)

  • 4/5

    Great product

    December 23, 2013

    Fits, looks and works very well. Installation may have been faster, but I was also installing a BBK MAF sensor and intake spacer.

    Fordman94

    Year: 1994 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 4 Monroe, NC

    Helpful (0) (0)

  • 4/5

    It's great but don't mix and match

    August 27, 2013

    This mass air flow meter is awesome, but I installed it with the cheaper version SR Performance cold air intake. The fit is very tight! I recommend to not do this. I also installed a SR Performance 76 mm TB (witch is also awesome) but again I had to do some tinkering- a few different adjustments and some wire unplugging- but now works great. I don't know if the two diff brands just don't mesh electronically or what. I love this product although a bit pricy. Just make sure you don't mix the two together unless you want to fight with them to fit.

    NatsPony44

    Year: 1995 Model: GT Driving Style: Street / Strip 'Stangs I have owned: 1

    Helpful (0) (0)

More Products You Might Like

Related Categories