WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping on Everything. Seriously. Details

BBK Cold Air Intake (11-14 V6)

Market Price $344.99 You Save 13% ($45.00)

$299.99

FREE Shipping
  • Item 56115
  • MPN# 1778

In Stock Ships same business day. Choose options to add to cart

Features, Video & Details

  • Increases of Up to 10 RWHP
  • Better Throttle Response
  • NO Computer Re-Tune Required
  • Money Saving Reusable Filter
  • Bright Chrome Finish
  • Fits 2011-2014 3.7L V6 Mustangs

Review & Installation Video

Review & Install Video

Improves Horsepower. A BBK Cold Air Intake improves the airflow path into your Mustang's engine for more power and better acceleration all while filtering out harmful power robbing dust particles. This BBK CAI kit completely replaces your 2011-2014 V6 Mustangs restrictive factory air box and paper filter element with a high flow BBK filter assembly for an increase of 8 to 10 rear wheel horsepower.

No Tune Required. Unlike other Cold Air Intakes on the market for the 2011-2014 V6 Mustangs the BBK CAI does not require a computer re-tune. The engineers at BBK really did their homework to improve your Pony's power using the factory tune.

Reusable Filter. BBK designed their high flow cotton air filter to be reusable. So no there is no need to go out and buy a new filter every few thousand miles. Just clean the filter, re-oil it, save money, and go!

Chrome Finish. This BBK CAI not only improves your Pony's horsepower and acceleration, but it also improves your Mustangs under hood appearance with a striking chrome finish. You'll be sure to win all the car shows with this jewel under the hood.

Easy Installation. BBK Cold Air Intake kits are designed to install with just basic hand tools. No extra modifications or special tools are required for an easy 1 hour installation.

Application. This BBK Cold Air Intake System is specifically designed to fit the 2011-2014 3.7L V6 Mustangs and does not require re-tuning the vehicles computer for operation.

Fitment: 2011 2012 2013 2014 Details

What's in the Box
  • (1) Intake tube
  • (1) Silicone coupler
  • (1) Heat Shield
  • (1) Air filter
  • Clamps & all needed hardware
Installation Info
Tech Specs
Cold Air Intake Specifications
Year/Model: 2011-2014 V6 Filter Placement: Engine Bay
Material: Aluminium Finish: Chrome
Manufacturer: BBK Computer Tune Required: No
Will it fit my Mustang?
  • V6 - 11, 12, 13, 14

Most Helpful Reviews

5/5
Great item

30 mins to install is about right. 20 of which were spent on getting the stock air intake out without breaking it :) I'd recommend it for everyone.

Helpful (8)

5/5
Does look good.

This was a pretty easy install. It took me more than an hour(I'm old) but a lot less than an afternoon. Performance? I don't know. I hadn't really put the hammer down before doing it....still haven't. ...

Read More
Helpful (5)

Overall Rating 4.8 out of 5 stars
Read All 55 Reviews

Customer Photos (38) Submit Your Photo

View All 38 Photos

You Might Also Like

6 Questions / 10 Answers

Ask a Question

If I add a tuner to this cold air intake will it give me more hip? How much more hp will I gain?

Twan

  • sure, actully the cold air intake may gain up to 8-10 HP. If you add tune to it, you will get over 26 HP. the tuner by it self gains 16 HP. if you go to tuners> bama SCT tune v6> you will know more when you see the video. :) hope that helped you

    RayanRitchie

    Good Answer (2) (1)

Show 2 more answers Question Resolved

Air Intake through front grill? Whats up everyone! Quick question; The heat shield that comes with the BBK CAI doesn't seem to hook up with the factory air inlet from the grill so I was wondering will that rob me of any HP or should I replace the shield or make my own?

HareB89

  • All the factory stuff is removed - it's actually pretty easy. The hardest part was removing the part that connects to the front of the car. The instructions say pull gently upwards - they don't tell you that you have to push a couple of tabs first. If a part does not remove easily, there is probably a tab that needs to be pushed. I was picky about removing all my original equipment because in a few year, I have to put it all back when I have to get mine smogged. And no, you won't lose any HP and the CAI will really improve throttle response and I think it sound great.

    Boomguy

    Good Answer (2) (0)

Show 2 more answers Question Resolved

vacuum cup (manual) does this BBK Cold Air Intak have vacuum cup because my is manual?

Ding

  • Hello, I'm assuming you mean a "cover" for the extra intake that is used by the automatic transmission. Mine did come with one, however I've read many reviews where people say that theirs did not. Please don't let the lack of a port cover stop you from buying this CAI - a quick stop at the parts store and a couple of bucks will solve the problem if yours doesn't come with one.

    Boomguy

    Good Answer (1) (0)

Answer This Question I need this answered (0) (0)

I have never purchased a reusable air filter. How do you clean it and what type of oil is used for re-oiling? where do I find this oil and does the kit come with any oil? I can do most re-mods, but I just never tried this one. Thanks for your help and advise. Wayne47

Wayne47

  • Step 1: Liberally spray Filter Cleaner onto both sides of filter and allow to soak for 10 minutes to loosen the dirt. Do not allow cleaner to dry on air filter. Step 2: Rinse your filter Step 3: Dry your filter Step 4: apply oil You can find nice little kits for cleaning your air filter at most auto-parts stores, or you can even contact BBK directly!

    JeffAM

    Good Answer (0) (0)

Answer This Question I need this answered (0) (0)

will this intake fit well with a super charger? the super charger offered by American muscle from pro charger

Twan

  • NO, THE SUPER CHARGER COMES WITH ITS OWN COLD AIR ITAKE SYSTEM, THE BBK IS TOO SHORT TO REACH . PAPPY

    PAPPY

    Good Answer (0) (0)

Answer This Question I need this answered (0) (0)

Does it come with stickers?

Trevor

  • I apologize I am not sure what kind of stickers you would be referring to. The this BBK Cold Air Intake kit will only come with the cold air intake.

    SalC7

    Good Answer (0) (0)

Question Resolved

More Products You Might Like

Customer Reviews (55) Write a Review

Overall Rating 4.8

out of 5 stars

Installation Time:Less than 1 Hour

  • Performance Gain 4.595238 4.6
  • Fit 4.116279 4.1



  • 5/5

    February 22, 2011

    Great item

    30 mins to install is about right. 20 of which were spent on getting the stock air intake out without breaking it :) I'd recommend it for everyone.

    MJ

    Helpful (8) (0)

  • 5/5

    Installation Time: Afternoon

    January 23, 2012

    Does look good.

    This was a pretty easy install. It took me more than an hour(I'm old) but a lot less than an afternoon. Performance? I don't know. I hadn't really put the hammer down before doing it....still haven't. But it does look good.....a lot better than what came with the car. The fit is pretty tight....The directions are good, but ya' need to do a little "re-adjusting" when getting close to finishing up.

    RoadStarPapa

    Year: 2012 Submodel: V6 Warner Robins, GA

    Helpful (5) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    September 07, 2013

    bbk nailed it

    This cold air intake looks great and performs great.I noticed a big gain in throttle response and horsepower.I do recommend adding the BBK throttlebody with it.

    sonny13

    Year: 2013 Submodel: V6 Tyaskin, MD 21865, USA

    Helpful (4) (0)

  • 5/5

    Installation Time: Afternoon

    December 12, 2011

    small problems but awesome product!

    first off i love this cai, it fits my v6 kona blue perfectly and matches my chrome strut tower brace and chrome dress up kit too. the good- cai looks good and makes a really nice whistle when you first punch the gas plus i could actually feel a good torque gain after the instal and i didnt even have a tune or need one. the bad- my first problem was while i was taking out the stock airbox there was a little breather airway that was a pain in the a** for me to take out (it took me about an hour to just take that piece out without breaking it) then there was a factory defect on the cai where the top left hole for the screw on the mass air flow sensor wasnt drilled right and ended up with me popping out that stupid top right rivet... it still works fine without the rivet and no top left screw but im going to have to take it to a shop so they can re-drill it and put a new rivet back in. other than that, i would honestly recommend this product to anyone over all the other brands because of style and performance. P.S. the reason there are 2 breather tubes is because on an automatic mustang there are two breathers. on a manual there is just one, so if you have a manual go to auto zone and pick up a small plastic cap to place around that tube since it wont be used. my picture is the kona blue one that is all chromed out =]

    kennethG

    Year: 2012 Submodel: V6 san diego, CA

    Helpful (5) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    April 18, 2013

    GREAT MOD FOR BEGINNERS

    I purchased this CAI after shopping around and comparing brands and I must say that I am very impressed. Installation was a breeze 35 mins and it was in and running great. Only thing i can say is that it is a very exact fit so when installing make sure you double check everything before tightening it all down also when reinstalling the mass air flow sensor be very careful with how tight you make the screws to tight and you WILL pop a rivet... However the car runs great no issues and an overall great product and the difference in how it drives and sounds is awesome. Quit comparing and just buy it!!!

    Burge

    Year: 2012 Submodel: V6 Dover Air Force Base, Dover, DE, USA

    Helpful (3) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    March 01, 2012

    BBK

    I put this on with the BBK throttle body and it has made my car feel completely different. The throttle response is much better and it looks better than most of the other cold air intakes. Also it only took me about 40 minutes to get the throttle body and air intake off and the new ones put on. I highly recommend this product.

    lavaredstang

    Year: 2012 Submodel: V6

    Helpful (3) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    January 18, 2012

    bbk

    Overall it sounds and looks great, would have given 5 stars across the board. Reason being, I had to basically force the mass air flow sensor into place and eventually use the screws to pull it all the way down tight, did not think it would fit at first but took the risk and it worked, and the other reason is that the intake has two places for breather hoses and my car only uses one, and it dose not come with any kind of plug, can buy a cheap set of caps from local auto store for a couple bucks, but bbk could easily throw one in the box, and perhaps even color matching

    jkeeter

    Year: 2012 Submodel: V6 nc

    Helpful (3) (0)

  • 5/5

    March 31, 2011

    All Satisfaction

    I have to say, I am very happy with what my new BBK cold air intake has done to my 2011 mustang. It has gotten alot better gas milage, and has added an extra kick to my car. It had someone thinkin I was in a V8. They were shocked when I told em it was a V6 with a BBK cold air intake. I am looking to buy more items from this company, because I know for a fact they wont let my hopes down.

    Dayton Lewis

    Year: 2011 Submodel: V6

    Helpful (4) (2)

  • 5/5

    April 22, 2011

    Worth the money

    Got it in 3 days and installed in 30 minutes. Fit perfectly on my 2012 V6. Looks great and makes the engine sound and run even better!

    Lance Longacre

    Year: 2012 Submodel: V6

    Helpful (1) (1)

  • 5/5

    February 19, 2011

    Cold air intake

    ordered it got it in 3 day's..it only took 30 mins to install. i would tell anyone to order this item.

    Betty Owen

    Helpful (1) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    November 21, 2016

    Fast delivery

    Great packaging fast delivery easy to install looks great on my car.

    T

    Year: 2014 Submodel: V6

    Helpful (0) (0)

  • 5/5

    October 17, 2016

    Looks Awsome!

    It fit very nice! And makes my car sound much better

    Tony2012

    Year: 2012 Submodel: V6

    Helpful (0) (0)

  • 5/5

    October 14, 2016

    added a little extra umph.

    This Cai is awesome, great product for the price, gives your car a really nice sound along with some extra power. Would recommend to any one looking for a Cai

    carl

    Year: 2014 Submodel: V6

    Helpful (0) (0)

  • 5/5

    September 06, 2016

    5 stars

    Great product. Deepens tone and feels like the engine is more alive

    Madmax

    Year: 2013 Submodel: V6

    Helpful (0) (0)

  • 4/5

    September 02, 2016

    Worth it

    You'll make back the cost on gas alone, it sounds cool, and gives a slight low-end boost. Not to bad to install, just gotta make sure everything fits together.

    Auston

    Year: 2011 Submodel: V6

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    June 12, 2016

    Great Beginner Install!!

    The CAI came in quick and had everything in it to help with the install! Very easy to install, only took an hour and a half to do. Sounds great and you can feel the throttle response instantly! Thanks American Muscle and BBK!

    Romano14mustang

    Year: 2014 Submodel: V6

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    May 04, 2016

    Great buy!!

    I read reviews on this product before and there was no surprises. The video of install is spot on. As the other reviews stated the inlet box going to the radiator was a pain but it came out against its will. Great sound and performance off the line. Definitely feel the throttle response

    Braezl

    Year: 2014 Submodel: V6

    Helpful (0) (0)

  • 5/5

    Installation Time: Afternoon

    April 27, 2016

    Awesome!!!!!

    I got a 2013 V6. After I changed the air intake I could feel the difference and it sounds more aggressive! I love it!

    Ben

    Year: 2013 Submodel: V6

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    April 18, 2016

    Great start for upgrading

    I think the hardest part was just trying to keep that pipe looking good and shiny. This is a very easy installment and was very noticeable after installed. I could instantly tell a difference in sound when I gave it gas compared to my stock intake, and my car does feel like it has a little bit better take off right now. Overall, I'd say this is defiantly an easy way to gain experience by learning how to install mods on your car and playing around with the parts until you get the best performance from it.

    LavaPony

    Year: 2012 Submodel: V6

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    April 16, 2016

    Quick install

    Nice complete kit. took less than 45 minutes start to finish. Clean look and cleans up the engine bay!

    Stang12

    Year: 2012 Submodel: V6

    Helpful (0) (0)

Related Mustang Categories