Talk to a Mustang Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

Best Sellers

How to Install a BBK Coyote 5.0L Swap Shorty X-Pipe on your 1979-1995 Mustang

Installation Time

2 hours

Tools Required
  • Basic Hand Tools Required
American Muscle
Shop Parts in this Guide

Installation

1. With vehicle raised in the air and supported on jackstands, pre-install the BBK Coyote Swap Headers and the supplied studs into the headers collectors.

2. Lift X-pipe assembly into place and support with a jack. Connect the front flanges of the X-pipe to the header collectors. Slide X-pipe flanges over the header collector studs.

3. Install the nuts and washers provided with the headers onto the collector studs.

4. Connect the rear of the X-pipe to the stock flow tubes going to the mufflers.

5. Position X-pipe for best fit and ground clearance and tighten all nuts and bolts.


Best Sellers