Billet Headlight Switch Installation Guide

1. Take your headlight knob and pull it all the way out so your headlights are turned on.

2. Look on the side you to see that there is a small tab that retains the headlight knob in the bezel. Take your flat screwdriver and push that tab in.

3. Remove your factory knob.

4. Take your new headlight knob and slide it onto the rod that is now sticking up and out of your interior trim.

5. Keep the post in the "ON" position (pulled all the way out). Use the supplied allen screw and key and tighten the set screw until the knob is firmly attached to the mounting post.