Win Free Mods & Tuning Enter Now
1-888-332-7930 M-F 9-9,Sat 9-5:30,Sun 12-4 ET

Free Shipping on Everything. Seriously. Details

Modern Billet Black Pony Delete Billet Grille - Lower (10-12 GT)

100+ Reviews
Our Price


  • Item #17060
  • Market Price $79.99
  • You Save 13% ($10.00)
In Stock Ships same business day.
Free Shipping on Everything
Product Videos
  • Gloss black finish
  • Lower grille
  • Full aluminum construction
  • Simple installation
  • No cutting required
  • Fits 2010+ GT Mustangs
Black Finish. This aluminum lower grille is finished in gloss black to compliment the SR Upper Grille on the Mustangs newly redesigned front end. High quality construction means that this aluminum grille is made to last.

Installs in Minutes. Made from solid aluminum, this grille is meant to last. It simply installs over your stock factory lower grille and doesn't require any cutting. It can be installed in the comfort of your own driveway in minutes.

Application. This Billet Grille will fit the 2010 to 2012 Ford Mustang GT, but does

not fit the California Special Edition.

Technical Note. Applies over top of the factory grille. Image shows both upper and lower grilles (sold separately).

Mustang Fitment: 2010 2011 2012 Details

What's in the Box
  • (1) Lower Grille
  • Boss 302 - 12
  • GT - 10, 11, 12

Most Helpful Reviews View All

Overall Rating 4.4/5 Write a Review
Good bang for the buck

I debated between the Roush grille and the AM grille for a few months. I did thorough research and compared pros and cons of each and decided to try out the AM grille. The grille looked great out of the

Read More
Helpful (5) (0)


the product itself is great.the instructions are terrable to say the least!be prepaired to have to cut out some of the middle section of your stock grille(which instuctions do not tell you)I used a hand

Read More
Helpful (9) (3)


You Might Also Like

Q & A (11 Questions, 9 Answers) Ask a Question

V6 Do they make one of these for the v6 2012?

deatshoo1 Year: 2012 Model: V6

Question Resolved
Good Question (0) (0)
  • Certainly do! Check out the link below for the Black Retro that fits your V6!

    Helpful (1) (0)

    Best Answer

    LisaS Year: 1992 Model: GT

Show 1 more answer

Can this grille be used on a premium v6? I would like to know if this grille designed for a gt will still work if mounted on a v6 premium 2012?

MaxSchweitzer Year: 2012 Model: V6

Question Resolved
Good Question (0) (0)
  • Unfortunately not. This grille is only designed to fit properly on the GT, as it has a different front bumper and grille frame than the V6 Mustangs.

    Helpful (0) (0)

    LisaS Year: 1992 Model: GT

Show 2 more answers

Does the tri-bar emblem work on either side/center of this grille?

Jaws10 Year: 2010 Model: GT

Question Resolved
Good Question (0) (0)
  • You put the emblem wherever you want. The bracket in the back smooshes it to the grille you place it wherever you want and then put the locking clips on.

    Helpful (1) (0)

    Best Answer

    Philitup Year: 2012 Model: V6

    Top 25 Contributor

Show 3 more answers

Reviews (100+) Write a Review

  • 5 Stars .54 53%
  • 4 Stars .35 35%
  • 3 Stars .07 7%
  • 2 Stars .04 4%
  • 1 Stars .01 1%

out of 5 stars

100 Customers Recommend this Product

Installation Time:Less than 1 Hour

  • Fit: 4.059524 4.1/5
  • Appearance: 4.726191 4.7/5
  • Bang For Your Buck: 4.373494 4.4/5
Filter By Sort By
  • 5/5

    Good bang for the buck

    October 05, 2011

    I debated between the Roush grille and the AM grille for a few months. I did thorough research and compared pros and cons of each and decided to try out the AM grille. The grille looked great out of the box without any damage. The paint on the grille is about a 9/10 with it being a little heavy in some places. No big deal for the price. The instructions (even though I didn't read them, the Roush grille instructions are the best) have been revised and are easy to follow. No problems with the hardware either. The grille does not move and fits pretty snugly. After reading a few bad reviews on various Mustang sites, I am glad I took a chance on this grille. So far I have been very pleased with how it turned out and I'm glad I was able to save $70. This thread convinced me to purchase this grille and it has some nice images of the grille during the install.


    Year: 2011 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 4 Moore, OK

    Helpful (5) (0)

  • 3/5


    September 09, 2010

    the product itself is great.the instructions are terrable to say the least!be prepaired to have to cut out some of the middle section of your stock grille(which instuctions do not tell you)I used a hand grinder with a cutoff wheel

    phil linderman

    Driving Style: Show

    Helpful (9) (3)

  • 5/5

    Looks awesome!!!!!

    October 01, 2010

    The looks of the grille are fantastic, the instructions aren't. Being a novice handyman at best in regards to cars, the upper grille was easy. Just be careful removing the original grille, it is very easy to scratch your bumper especially if you do not decide to completely remove the original grille. I installed it without removing the fog lights as suggested. The upper grille instructions are 99% accurate and with pictures. The lower grille instructions are just horrible. Don't bother re-reading the 4 lines of instruction over and over looking for the answer you might have missed, it isn't there. The problem is getting the bracket to hold on to the fascia while you are threading a screw through it. I kept knocking it off. I was placing the bracket on top, not on the sides. My solution was to reach from the lower left of the grille and place a finger against the RIGHT bracket while I threaded the screw through it and tighten it slightly and then switch to the left side. Be careful not to put too much pressure on the grille because it will bend out of shape. If you have large forearms, forget it. I also suggest googling and checking out various mustang forums for install help. A lot of good ideas there too. I really love how it looks and I get a lot of compliments. Completely worth the minor hassle of installing myself.


    Driving Style: Daily Driver

    Helpful (4) (0)

  • 1/5

    Get something else

    March 06, 2012

    Even for $150, one should expect much better quality than this. The metal tabs in back of the grill need to be aligned for the grill surround, but easy break off if you apply too much pressure. Save your money and the Roush.


    Year: 2012 Model: Boss

    Helpful (3) (0)

    • Response from AmericanMuscle

      The grille is made of very durable billet and shouldn't be breaking like that during installation. Give our customer service a ring. We can get you set up with a replacement shipment and a pre-paid return label for the defective grille.

      Lisa , Content Specialist

  • 5/5

    Great looking

    July 23, 2011

    The grills (I installed top and bottom) are finished well and not from light weight material. Top - Instructions are in Chin-English but you can make out what they mean. With the pony delete you WILL have to cut out the whole Pony mount area as the grill can't be installed with it there. You don't see the missing pony part of thr grill when all is installed again. Simple installation on a table or work bench (removal of the OEM off the car is required). Bottom - Really finishes off the air scoop and gives the car clean lines. Again the instructions are Chin-English. They are straight forward BUT the way to install this and make sure the mounts fit properly is do it with the OEM upper grill removed. I first tried installing this first and after about 20 minutes of getting no where moved to the top grill. With the top grill removed it takes


    Year: 2011 Model: GT Driving Style: Daily Driver

    Helpful (3) (0)

  • 4/5

    Upper and Lower billit gril

    June 13, 2010

    looks great. Directions need to be improved. Once grill is in moves alot. Had to screw to bumper cover to make it solid. other than that great look

    Donnie Meyer

    Helpful (3) (1)

  • 3/5


    February 27, 2010

    looks good once you finally get it installed. but the hardware to put the grill on is terrible and the bolts arent long enough so i had to go buy my own. oh well looks good now on my murdered out 2010 stang

    James J

    Year: 2010

    Helpful (3) (1)

  • 4/5

    Lower Grill

    February 27, 2013

    I bought this lower grill (black) to protect the supercharger radiator on my 2010 Mustang from stone damage. The grill is well made, it fits perfectly into the lower grill opening and it looks great. The method of installation, however, is atrocious. The grill attaches with two long screws that pass through holes in the grill and tread into J-hooks designed to hook onto the 'lips' of the side plastic walls inside the grill opening. I found it impossible to do this. There are two, cheap, spring clips (that will rust) that must be placed over the J-hooks for the long screws to thread into. This is hokey. The screws are not long enough to pass through the grill and start threading into the spring clips on the J-hooks and still catch the plastic edges. I had to duct-tape the J-hooks on the plastic lips and then try to start the screws. It still didn't work since the screws are just too short. I ended up attaching the J-hooks to the plastic edged on the upper side of the grill opening (closer to the front) but this is much less secure. Frankly, I do not trust the attachement screws not to vibrate lose while driving. I intend to remove the grill and modify the installation method. I will weld the J-hooks onto 316-SS threaded stock cut long enough to catch the plastic lip and protrude through the grill. I'll use small stainless Nylock nuts on the front of the grill to tighten the grill into the opening. American Muscle should really redesign the attachment method for this grill.


    Year: 2010 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 1 Louisville, KY, USA

    Helpful (1) (0)

  • 5/5

    This is my second lower

    October 19, 2012

    I bought the full set and loved it. Installation is a breeze with the Z hooks and screws and it looks fantastic. I get comments all the time about how great my new nose looks. However, I have a splitter style front fascia that rides low and forward, so I tend to scrape it a lot. After a particularly hard hit, I got about 60 miles down the road and the lower grille popped right out. So this time, I took extra precautions to keep it in place. Probably not a bad idea to keep an eye on it, even if you're not lowered.


    Year: 2011 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 4 Clovis, NM

    Helpful (1) (0)

  • 4/5

    good look but fragile

    September 12, 2012

    the lower grill looks great installed, but the metal is weak and will bend if not handled gently.


    Year: 2012 Model: GT

    Helpful (1) (0)

More Products You Might Like

Related Categories