Talk to a Mustang Expert
1-888-332-7930
M-F 9-9,Sat 9-5:30,Sun 12-4 ET

Free Shipping on Everything. Seriously. Details

Modern Billet Black Pony Delete Billet Grille - Upper (10-12 GT)

25 Reviews
Clearance Price

$98.99

(each)
  • Item #17056
  • Market Price $129.99
  • You Save 24% ($31.00)
In Stock Ships same business day. Choose options to add to cart
Free Shipping on Everything
Product Videos
Features
  • Gloss black finish
  • Upper grille
  • Full aluminum construction
  • Deletes Pony emblem
  • Fits 2010+ GT Mustangs
Description


Black Finish. This aluminum upper grille features a gloss black finish that compliments the Mustangs newly redesigned front fascia for a sleek stealthy appearance. High quality construction means that this aluminum grille is made to last.

Pony Delete. Eliminate that huge pony grille emblem with a billet grille overlay that features gloss black horizontal bars for an intimidating stealthy appearance on any GT Mustang.

Installs in Minutes. Made from solid aluminum, this grille is meant to last. It simply installs over your stock factory grille and only requires minimal trimming of the corral surround. It can be installed in the comfort of your own driveway in minutes.

Application. This Billet Grille will fit the 2010 to 2012 Ford Mustang GT, but does not fit the California Special Edition.

Technical Note. Applies over top of the factory grille. Image shows both upper and lower grilles (sold separately).

Fitment: 2010 2011 2012 Details

Won't fit? Add an exception

What's in the Box
  • (1) Upper Grille
Will it fit my Mustang?
  • Boss 302 - 12
  • GT - 10, 11, 12

Most Helpful Reviews

3/5
grilled

the product itself is great.the instructions are terrable to say the least!be prepaired to have to cut out some of the middle section of your stock grille(which instuctions do not tell you)I used a hand ...

Read More
Helpful (9)

5/5
Great looking

The grills (I installed top and bottom) are finished well and not from light weight material. Top - Instructions are in Chin-English but you can make out what they mean. With the pony delete you WILL ...

Read More
Helpful (3)

Read All 25 Reviews
Overall Rating 4.3 out of 5 stars

Videos

Hey guys, Justin here with AmericanMuscle.com, checking out these really cool Pony delete billet grilles for your 2010 and up Mustang. Billet grilles are a great way to drastically alter the front end View Full Transcript

You Might Also Like

2 Questions / 1 Answers

Ask a Question

Lower Grille + CDC Chin Spoiler? Will the lower billet grille work in conjunction with the CDC Chin Spoiler?

bobpepr123 Year: 2010 Model: GT

  • Yes, the CDC Chin Spoiler will work with the lower billet grille. AM actually combined the CDC Chin Spoiler and the lower billet grille on their Project Blackout 2012 GT and it looked great. You should have no problems!

    Pluto Year: 2012 Model: GT

    Good Answer (0)

I currently own a 2012 V6 and I have been looking at the GT grilles and researching the best way to fit the GT grille in my V6. I do not want to go about buying a whole new GT front end, what are my other options?

Elliot Year: 2012 Model: V6

Answer This Question I need this answered (0) (0)

More Products You Might Like

Customer Reviews (25) Write a Review

Overall Rating 4.3

out of 5 stars

Installation Time:Afternoon

  • Fit 3.590909 3.6
  • Appearance 4.863636 4.9
  • Bang For Your Buck 4.318182 4.3



  • 3/5

    September 09, 2010

    grilled

    the product itself is great.the instructions are terrable to say the least!be prepaired to have to cut out some of the middle section of your stock grille(which instuctions do not tell you)I used a hand grinder with a cutoff wheel

    phil linderman

    Driving Style: Show

    Helpful (9) (3)

  • 5/5

    July 23, 2011

    Great looking

    The grills (I installed top and bottom) are finished well and not from light weight material. Top - Instructions are in Chin-English but you can make out what they mean. With the pony delete you WILL have to cut out the whole Pony mount area as the grill can't be installed with it there. You don't see the missing pony part of thr grill when all is installed again. Simple installation on a table or work bench (removal of the OEM off the car is required). Bottom - Really finishes off the air scoop and gives the car clean lines. Again the instructions are Chin-English. They are straight forward BUT the way to install this and make sure the mounts fit properly is do it with the OEM upper grill removed. I first tried installing this first and after about 20 minutes of getting no where moved to the top grill. With the top grill removed it takes

    Mark

    Year: 2011 Model: GT Driving Style: Daily Driver

    Helpful (3) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    February 27, 2013

    Lower Grill

    I bought this lower grill (black) to protect the supercharger radiator on my 2010 Mustang from stone damage. The grill is well made, it fits perfectly into the lower grill opening and it looks great. The method of installation, however, is atrocious. The grill attaches with two long screws that pass through holes in the grill and tread into J-hooks designed to hook onto the 'lips' of the side plastic walls inside the grill opening. I found it impossible to do this. There are two, cheap, spring clips (that will rust) that must be placed over the J-hooks for the long screws to thread into. This is hokey. The screws are not long enough to pass through the grill and start threading into the spring clips on the J-hooks and still catch the plastic edges. I had to duct-tape the J-hooks on the plastic lips and then try to start the screws. It still didn't work since the screws are just too short. I ended up attaching the J-hooks to the plastic edged on the upper side of the grill opening (closer to the front) but this is much less secure. Frankly, I do not trust the attachement screws not to vibrate lose while driving. I intend to remove the grill and modify the installation method. I will weld the J-hooks onto 316-SS threaded stock cut long enough to catch the plastic lip and protrude through the grill. I'll use small stainless Nylock nuts on the front of the grill to tighten the grill into the opening. American Muscle should really redesign the attachment method for this grill.

    docmark007

    Year: 2010 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 1 Louisville, KY, USA

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    October 19, 2012

    This is my second lower

    I bought the full set and loved it. Installation is a breeze with the Z hooks and screws and it looks fantastic. I get comments all the time about how great my new nose looks. However, I have a splitter style front fascia that rides low and forward, so I tend to scrape it a lot. After a particularly hard hit, I got about 60 miles down the road and the lower grille popped right out. So this time, I took extra precautions to keep it in place. Probably not a bad idea to keep an eye on it, even if you're not lowered.

    MstngMnNM

    Year: 2011 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 4 Clovis, NM

    Helpful (1) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    September 12, 2012

    good look but fragile

    the lower grill looks great installed, but the metal is weak and will bend if not handled gently.

    ScorpionCustomz

    Year: 2012 Model: GT

    Helpful (1) (0)

  • 3/5

    Installation Time: Less than 1 Hour

    December 08, 2011

    Decent Lower Grille

    Lower Grill looks great. Do not feel like it is on a 100%. had to make some adjustments but looks great in the end.

    bg22

    Year: 2011 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 1 Houston

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    December 02, 2011

    Great Improvement

    As others have noted, the directions are useless, but installation is relatively easy. Here's a suggestion to save a lot of time and work: You do NOT have to remove the OEM grille to install the blackout grille by this method. First remove the plastic cover over the grille, under the hood, to access the rear of the grille. Then use a Dremel cutting tool to cut out the pony and it's plastic surround. This tool looks like a drill, but cuts sideways, and it is perfect for removing the pony and its "corral." Then it's easy to screw in the center grille, which covers the hole left by the missing pony. I did not even bother installing the two side pieces (outside the fog lights). The grille makes a vast improvement on the appearance of the front of the car. Total time: About an hour and a half.

    RogerRabbit

    Year: 2012 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 1 East Coast

    Helpful (1) (0)

  • 5/5

    Installation Time: Afternoon

    December 02, 2011

    once we found the proper way to install it was very easy.

    the directions with this grill were very misleading. they should have been more to the point, once we found out how to install it was a piece of cake. my 2011 5,0 looks Great

    sgtmac

    Year: 2011 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 2

    Helpful (1) (1)

  • 4/5

    Installation Time: Afternoon

    August 04, 2015

    Tricky but worth it

    The outcome of this grille have an overall more agressive look to the front end, looks very mean. However, it was a big pain to install. Fitting the dremmel around the pony emblem to cut out the existing grille was time consuming and very difficult. Once I got the emblem off screwing down the new overlay over the stock grille was near impossible the holes were too small for the screws provided and some of the holes also didn't match up as well as they could of. The install just turned into a headache due to the miner problems I encountered. However it was worth the struggle because I love the new look!

    Mike

    Year: 2012 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 1 Schwenksville, PA

    Helpful (0) (0)

  • 4/5

    Installation Time: Afternoon

    April 24, 2014

    Looks great but had issues with placement.

    A couple of the screws were damaged when i received the parts. The bottom grill screws and brackets were not long enough to install correctly. Had to improvise to make the grill work correctly. It took about twice as long as it should have taken. Other than that it looks great!!!

    bmr4605

    Year: 2010 Model: GT Driving Style: Street / Strip 'Stangs I have owned: 1 Dubberly, LA, USA

    Helpful (0) (0)

Related Categories