Staggered Black 10th Anniversary Style Wheel & NITTO Tire Kit - 17x9/10.5 (94-98 All)

Hey I’m Justin with AmericanMuscle.com, and I’m taking a closer look at the 10th anniversary cobra style wheel, fitting all 94-04 Mustangs available in your choice of either Anthracite silver, black with a polished lip, or chrome. These split 7 spoke wheels were only found on the 2003 terminator cobras, which marked 10 successful years for Ford’s SVT edition. Taking a closer look at the wheels themselves you’ll notice a lightweight aluminum construction, and a design that’s unlike any other Bullitt wheel, or typical 5 spoke design. They are a flat faced wheel, meaning there’s no real lip however once you start getting into the wider sizes such as the 10.5’s the face of the wheel becomes more concave, which in my opinion looks really cool. Speaking of sizing, the 10th anniversary cobra wheels are available in 17 and 18” diameters, and 9, 10, and 10.5” widths, so you could toss the 10, or 10.5’s on the rear, and put the 9’s up front and pull off the staggered fitment if you really wanted to. As you can see we do have these wheels installed on some of the cars around the shop just to give you a better idea of how they look. Starting with our 98 GT behind me where we have the 17x9’s in black, our 2000 V6 back there on the lift has the 18x9’s in chrome, and finally our 2000 GT behind me on the Dynojet is sporting the 17x9’s in Anthracite. If you’re interested in picking up a new set of tires with your cobra style wheels then you might want to check out one of our pre-built tire and wheel combinations, here we pair your new wheels up with some of the top tires on the market today, in sizes that are guaranteed to fit your ride without rubbing, even if you’re lowered a little bit. In addition, you also get to take advantage of our free shipping and handling, and free mounting and balancing. Finally, all of our American Muscle wheels are backed by a lifetime structural warranty, as well as a 1 year warranty on all finishes. When it comes time to install your new wheels, you’ll just want to make sure you have a floor jack and some basic hand tools. First you’ll want to make sure the car is on level ground and then crack the lugs loose before getting the car in the air, once you’ve done that go ahead and jack the car up and swap the wheels. It’s that easy, doing all this should take you no more than an hour from start to finish. So if you’re looking for a new set of wheels for your 94-04 Mustang and you’re a big fan of the modern split 7 spoke design, then be sure to check out these 10th anniversary cobra style wheels right here at AmericanMuscle.com... HIDE