- (4) Wheels
- (4) Center Caps
- (4) Tires
- Hardware included:
- None Required
Add FREE Nitrogen Fill
AmericanMuscle no longer carries the Staggered Saleen Style Black Wheel & NITTO Tire Kit - 17x9/10.5 (94-98 All). Please check out Black Saleen Style Wheels (1994-1998) for an updated selection.
Fitment: 1994 1995 1996 1997 1998 Details
Free Mounting & Balancing: Professional mounting & balancing is available on all wheels and tires when purchased together on the same order, so you can just swap your wheels in your driveway when they arrive. We even offer Free Nitrogen tire fill (see option above).
What is TPMS? The Tire pressure Monitoring System is a safety feature on all 2007+ Ford Mustangs that alerts you when your tire pressure drops to an unsafe limit.
How do I keep my TPMS feature? Aftermarket wheels don't have TPMS sensors. If you select 'Add TPMS Sensor Kit' and 'Add TPMS Tool' at the top of the page when you order your wheels, then chose Free Mounting & Balancing when you add tires, we'll install the sensors for free!
Difficulty Level:Simple installation for anyone
|Manufacturer:||AmericanMuscle Wheels||Style:||Saleen||Size:||17x9 / 17x10.5||Finish:||Black||Placement:||Front and Rear||Centercap Size:||Large (2-1/2") / Large (2-1/2")|
|Back Spacing:||5.94" (151mm) / 6.85" (174mm)||Offset:||+24mm (0.94") / +28mm (1.10")|
|Bolt Pattern:||5x4.5" (5x114.3mm)||Weight:||0 / 0|
|Material:||Aluminum||Lip Size :||N/A / N/A|
|Best Tire :||Included||Year/Model:||Fits all 1994-1998 GT, V6, and Cobra|
December 28, 2015
Wheels and tires are sweet!! Couple small problems on my 95 GT.
First off let me say that these wheels and tires are awesome! They look great mounted on my 95 GT which is lowered about an inch. Front 17x9's went on without any issues. However, when I put the rear wheels and tires on (17x10.5 with 315's Nitto's) the tire rubbed on both the tailpipes and quad shocks. I tried to flip the quad shocks over but they still rubbed so I removed them and will be upgrading my lower control arms instead. My tailpipes were aftermarket hand made so I just cut them off and will be going with exhaust dumps instead. The final issue I had was a very small bit of rubbing happened in the rear wheel wells when taking turns. To fix this I just took a hammer to the spot on the inner wheel well that was rubbing and pounded it in until it was clear of where the tire rubbed (can't be seen unless you take the tire off and look for it). Covered up that area with fresh plasti-dip and now I can drive without issue. I had this same setup on an 01 GT and had no issues at all so this could be specific to the 94-98 body style. Either way I am extremely happy with this setup and the few small issues that I ran into were fixed in under an hour; well worth it!