MGP Matte Black Caliper Covers w/ 5.0 Logo - Front & Rear (11-14 GT, V6)

Hey I’m Justin with AmericanMuscle.com, and I’m checking out MGP’s front and rear caliper covers, fitting all 2005 and newer Mustangs. So here’s the deal, an aftermarket big brake kit is not exactly cheap, and painting your factory calipers can sometimes not give you the results you’re looking for. These covers from MGP are a great way to cover up those ugly factory calipers, while adding a little customization and helping to reduce the brake dust on your wheels. The covers are offered in a red or a black powder coat and with a number of different logo options. We have a couple here on the table including the red GT logo, the complete black Cobra setup, the red running Pony logo, and the black 5.0 logo, just to name a few. Taking a closer look at the calipers you’ll first notice a very durable T6 aluminum construction, along with that powder coated red or black finish. In addition we have the officially licensed logo right in the center, along with some simulated hardware for a more realistic look. The installation really isn’t all that bad and should take you about an hour from start to finish. Of course you will need to remove your wheels just to gain access to the calipers so make sure you have your jack handy. In addition you’re going to want to make sure 3/8” wrench just to tighten up the hardware on the covers themselves, but other than that everything is completely straightforward. So if you’re tired of looking at those rusty factory calipers and you don’t feel like forking out big dough for an aftermarket big brake kit, you’ll want to look into MGP’s caliper covers available right here at AmericanMuscle.com... HIDE