WIN $7,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping on Everything. Seriously. Details

MGP Red Caliper Covers w/ Pony Tri-Bar Logo - Front & Rear (05-10 GT, V6)

Market Price $229.99 You Save 13% ($30.99)
Our Price


FREE Shipping
  • Item 81113
  • MPN# 10197SMB1RD

In Stock Ships same business day. Choose options to add to cart

Features, Video & Details

  • Custom Mustang Styling.
  • 6061-T6 Aerospace Aluminum.
  • Red Powder Coat Finish.
  • Reduces Brake Dust.
  • Easy Install.
  • Fits 2005-2010 Mustangs with 17" or Larger Rims.

Review & Installation Video

Review & Install Video

Hey I’m Justin with, and I’m checking out MGP’s front and rear caliper covers, fitting all 2005 and newer Mustangs. So here’s the deal, an aftermarket big brake kit is not exactly cheap, and painting your factory calipers can sometimes not give you the results you’re looking for. These covers from MGP are a great way to cover up those ugly factory calipers, while adding a little customization and helping to reduce the brake dust on your wheels. The covers are offered in a red or a black powder coat and with a number of different logo options. We have a couple here on the table including the red GT logo, the complete black Cobra setup, the red running Pony logo, and the black 5.0 logo, just to name a few. Taking a closer look at the calipers you’ll first notice a very durable T6 aluminum construction, along with that powder coated red or black finish. In addition we have the officially licensed logo right in the center, along with some simulated hardware for a more realistic look. The installation really isn’t all that bad and should take you about an hour from start to finish. Of course you will need to remove your wheels just to gain access to the calipers so make sure you have your jack handy. In addition you’re going to want to make sure 3/8” wrench just to tighten up the hardware on the covers themselves, but other than that everything is completely straightforward. So if you’re tired of looking at those rusty factory calipers and you don’t feel like forking out big dough for an aftermarket big brake kit, you’ll want to look into MGP’s caliper covers available right here at

Mustang Styling. This set of four Red MGP Caliper Covers are a great way to set off your new rims and they feature modern "Mustang" lettering on the front two covers and the iconic Tri-Bar Pony logo on the rear two. These Officially Licensed MGP Caliper Covers will give any S197 Mustang a big brake race ready look that will turn heads.

Reduces Brake Dust. These Caliper Covers not only look fantastic, but they also act as a protective dust shield to help keep your rims looking cleaner longer.

Quality Construction. MGP makes their Caliper covers from light weight 6061-T6 Aerospace Aluminum that is formed to the caliper for a perfect fit. The covers are then powder coated for a long lasting high gloss look. The installation brackets are TIG welded in place for extra security.

Easy No Mess Install. Painting your calipers can be messy and time consuming, but the MGP Caliper Covers simply install over your stock calipers and are held in place with the supplied clip and bolt. For a no muss, no fuss install.

Application. Designed to fit over stock brakes, this set of four MGP caliper covers include all the required hardware needed for installation on a 2005 to 2010 and newer V6 or GT Mustang.

Fitment: 2005 2006 2007 2008 2009 2010 Details

What's in the Box
  • (2) Front Caliper Covers
  • (2) Rear Caliper Covers
  • (8) Mounting Clips
Installation Info
Tech Specs
Will it fit my Mustang?
  • Bullitt - 08, 09
  • V6 - 05, 06, 07, 08, 09, 10
  • GT - 05, 06, 07, 08, 09, 10

Fits V6 and GT's with stock brake calipers only, does not fit Shelby GT500.

Technical Note. A minimum of 1/8 of an inch clearance between the wheel and the brake caliper is required for proper fitment. We have found that the MGP caliper covers will require the use of a small 1/4" spacer to provide proper clearance with our aftermarket Bullitt wheels, see drop down option above

People Who Bought This Item Also Bought

Most Helpful Reviews

Didn't fit on the back

The front covers went on extremely easy and fit properly. After installing the covers on the rear calipers, the clips scraped against the rotors when I braked. I spent quite a bit of time adjusting the ...

Read More
Helpful (1)

Good parts as always

American muscle has yet to dissipoint me. They have delivered another part which I enjoy looking at every time I go into my garage.

Helpful (1)

Overall Rating 4.4 out of 5 stars
Read All 63 Reviews

Customer Photos (72) Submit Your Photo

View All 72 Photos

You Might Also Like

9 Questions / 9 Answers

Ask a Question

Will I need to purchase spacers. The covers will be going over the stock calipers on 17inch wheels on my 05 gt. Thank you Glen.


Helpful (0)
  • You will not need to purchase any spacers for a proper install of these caliper covers.


I was thinking of putting the bullit 18x9 rims on 2008 v6 mustang,will I need the spacers for a correct fit?


Helpful (0)
  • Spacers are not required for use of these caliper covers.


I have a 2006 v6 with 2012 gt wheels,will I need the spacers for both front and back,18 in wheels


Helpful (0)
  • The MGP Red Caliper Covers w/ Pony Tri-Bar Logo should work, however, since the factory off set for the 2012 GT wheels have a higher positive offset, it may require a spacer for sufficient clearance to clear the caliper covers and the back of the wheel spokes.


Will I need spacers for stock wheels on a 2014 V6 sold in Canada? Thanks.


Helpful (0)
  • These are designed for 2005 to 2010 and fit very nicely on my 2007 V6 Convertible. The Canada thing is no problem the fact that you have a 2014 is. The good news is AM has what you need and will fit perfect. Item #81130 are the correct covers for your for your 2014 in a fantastic Mustang Red Powder Coat. A high gloss finish that will look good for years while keeping the brake dust to a minimum on your wheels.


Show 1 more answer

How do you determine if the caliper covers will fit? I read about rim size and some mention of spacers. Have 2007 V-6 convertible with 18" GT rims. Will they fit as is or do I need spacers and stuff?


Helpful (0)
  • The off set has to be right if the wheels are 18 or even 20 inch really don't make any different if you have factory rims on your car than your good.


Show 2 more answers

I have a 2007 V6, do I need to purchase the spacers? Thanks in advance!


Helpful (0)
  • YEP, you need the 1/4 inch spacers to make up for the thickness of the caliper can get 'em at american muscle while getting the covers....i have the black ones (and spacers) on my '05 gt


More Products You Might Like

Customer Reviews (63) Write a Review

Overall Rating 4.4

out of 5 stars

Installation Time:Afternoon

Installation Cost:0-$100

  • Fit 3.775 3.8
  • Appearance 4.8 4.8
  • Bang For Your Buck 4.075 4.1

  • 4/5

    Installation Time: Afternoon

    December 25, 2013

    Good parts as always

    American muscle has yet to dissipoint me. They have delivered another part which I enjoy looking at every time I go into my garage.


    Year: 2010 Submodel: V6 Geauga, Ohio

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    May 31, 2012

    Didn't fit on the back

    The front covers went on extremely easy and fit properly. After installing the covers on the rear calipers, the clips scraped against the rotors when I braked. I spent quite a bit of time adjusting the shape of the clips to avoid the scraping, but had no luck making them fit. They do look amazing on the front, though.


    Year: 2010 Submodel: V6 Boston, MA, USA

    Helpful (1)

  • 2/5

    January 20, 2012

    Good idea, but...

    I loved the concept of Caliper Covers; they make the Mustang look great, and they can prevent brake dust from impacting the wheels. All good. Unfortunately, the MGP Caliper Covers fall short of the mark. Installation time is way more than the 1 hour suggested, primarily because of fit and finish. The covers just don't seem to go on smoothly; the clips are not secure; and they are impossible to maneuver into a point where they don't interfere with the wheels. I did finally install them, but not without one of the caliper covers losing an essential screw. I think the covers could go through some modification so that installation is easier.


    Year: 2005 Submodel: GT Los Angeles,, California

    Helpful (2)

  • 3/5

    February 27, 2010

    abit frustrated

    To all 2010 v6 owners, you need the spacers with the stock rims for this product. The front of the caliper cover will make contact with the wheel without them. Im a bit frustrated it doesn't mention this in the part description. It states aftermarket billet needs them, but not the stock 2010 rim.


    Year: 2010 Submodel: V6

    Helpful (14)

  • 5/5

    March 16, 2010


    Great Product, the appearance is awesome, it does look like those top Hi-Performance brakes, it has being calling its attention and everybody on the street is asking me where I got those.

    Jefferson Santos

    Helpful (8)

  • 3/5

    Installation Time: Afternoon

    January 20, 2012

    Caliper covers on 2008 GT-CS

    Not at all pleased that they will not fit my California Special without wheel spacers. Almost, but not quite! I ordered hub-centric spacers because of the negative reviews of the 'universal' spacers. If you are not willing to do a little footwork and order more parts, do not buy. I will tell you more after a bit of time here in the winter weather of Denver's roads.


    Year: 2008 Submodel: Other Colorado

    Helpful (6)

  • 4/5

    May 18, 2011

    Need Spacers

    The covers look fantastic on the car, the only problem I had was the lack of spacers. Spacers ARE required for 2008 V6 Pony Package (17" wheels). It does not state this in the description so by the time I realized it the covers were scrapped.

    Bryan Campbell

    Year: 2008 Submodel: V6

    Helpful (6)

  • 5/5

    May 30, 2011

    Great touch

    Put these on my 2012 V6 in under one hour. Excellent fit with no problems with stock rims. Look fabulous.

    Steve B

    Year: 2012 Submodel: V6

    Helpful (5)

  • 5/5

    April 19, 2010

    tri-bar pony caliper covers

    excellent add on. makes wheels stand out and makes my pony look even sharper! highly recommend!


    Helpful (4)

  • 5/5

    March 19, 2010

    Highly recommended

    Needed spacers on mine, but MGP sent them to me for free and right away. Best $200 I've spent on my Stang. Amazed at the difference they made on my car.


    Helpful (7)

  • 4/5

    Installation Time: Less than 1 Hour

    February 10, 2012

    better then buying color caliper

    I got a 2007 GT/CS 18inch wheels had to put 1/8 inch spacers all 4 wheels plus they did not cover all the caliper front about 1/4 in. short top to bottom,rear about 1/8 in. short. the cover from side to side was great. I painted the little that was showing


    Year: 2007 Submodel: GT McKees Rocks PA

    Helpful (2)

  • 5/5

    March 31, 2011


    They are easy to install and look 1000 percent better than the stock calipers.

    Rick Clark

    Year: 2006 Submodel: GT

    Helpful (2)

  • 4/5

    March 28, 2011

    After market rims be careful.

    Good buy and like the look. A bit of warning for those of you with after market rims. Apply very carefully and and take your time. I have 20" Neeper rims and I had to adjust the caliper covers many times before I got it just right. Make sure you don't tighten the screws too much or it will bring the corners of the cover opposite the screw out too far, and it will rub on the rim. Although the covers look good, I would like to see caliper covers w/o the faux screws.


    Year: 2005 Submodel: V6

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    March 02, 2012

    Great Upgrade

    This is a great addition to my mustang. I had to adjust the rear clamps for clearance from the rotor. Once adjusted it rides smooth.


    Year: 2005 Submodel: V6 San Diego

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    January 27, 2012

    Installed Caliper Covers in a snap!

    I was able to install all four of these caliper covers in less then an hour, I have Roush Wheels and had no problem installing them with the wheels on. They bolt on securely, I have no issues with clearance, and I am very confident they will stay where I put them. The appearence change is awsome! I love them and Highly recomend these caliper covers! Jeff


    Year: 2008 Submodel: Other Lancaster, Pa.

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    January 27, 2012

    Easy Install an Looks Great

    Install was easy, just had to jack up car and take off tires. Makes the car look great. Would highly recommend


    Year: 2005 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    January 04, 2012

    Makes it look more aggressive.

    Wish they were a little bigger, but still a good purchase for the car.


    Year: 2007 Submodel: V6

    Helpful (1)

  • 4/5

    Installation Time: Afternoon

    December 28, 2011

    Minor install problems - great finished look though.

    I have an 05 GT with the standard GT 17 x 9 rims. The rear covers went on easy and had plenty of clearence. The fronts required two additional steps to install properly with my rims. 1) The front rims needed spacers. These were supplied and shipped free to me no charge as soon as I made American Muscle aware of my problem. 2) Once I had the spacers on I still had a problem with the inside stick on weights for tire balance. I had to have these removed and go with regular front lip mounted weights for tire balance to clear the covers. Not a major deal but not quite the simple bolt on as advertised. The finished product looks absolutely beautiful though.


    Year: 2005 Submodel: GT Cincinnati, Ohio

    Helpful (1)

  • 5/5

    Installation Time: Shop Install

    October 06, 2011

    I bought it as a gift. It looks fantastic on the mustang.

    It fits perfectly and looks great. Definitely recommend it!


    Year: 2009 Submodel: V6

    Helpful (1)

  • 5/5

    July 22, 2011

    caliper covers

    look amazing on my stang! had a little trouble with the rear covers grinding on my rotors but was able to straighten it out after a couple trials. overall good buy


    Year: 2007 Submodel: GT

    Helpful (1)

Related Mustang Categories