WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping on Everything. Seriously. Details

Modern Billet Chrome Cup Holder Cover (10-14 All)

Market Price $56.99 You Save 30% ($17.00)

$39.99

FREE Shipping
  • Item 41238
In Stock Ships same business day. Choose options to add to cart

Features, Video & Details

  • Clean Modern Styling
  • Durable Billet Aluminum
  • Bright Chrome Finish - Matches Factory Chrome
  • Easy 5 Minute Installation
  • Fits All 2010-2014 V6, GT, GT500 and Boss Mustangs

Review & Installation Video

Review & Install Video

Hey everyone I’m Justin with AmericanMuscle.com and I’m taking a look at this chrome cup holder cover that fits very well, in the newly redesigned interiors of the 2010 and up Mustangs. Ford made a lot of really nice improvements to these particular interiors, however it seems like they overlooked the center console area, that’s where this cover really shines. The cover is constructed from 100% billet aluminum and then is triple chrome plated, and polished to a brilliant finish. It’s available in either the plain chrome finish here, or the engraved GT logo we have installed in our 2011. The result is a part that flows extremely well with the existing chrome accents in your cars interior. Installation should take you about 5 minutes from start to finish, simply clean the area first with the supplied alcohol wipes then adhere carefully, a little install tip, make sure you have the cover aligned with the left side of the cup holder door to make sure the door opens properly. There’s no doubt that the interiors of the 2010 and newer Mustangs are a nice step up over previous years, however with any car there’s always room for improvements. So if you’re looking to finish what Ford started in terms of interior styling, then you’ll definitely want to check out this chrome cup holder cover.

Modern Styling. Complete the unfinished look of your boring stock center console with a cup holder door panel cover for impressive interior styling. With a bright chrome finish, this door panel cover matches the existing chrome accents of your Mustangs stock interior.

Superior Quality. This Cup Holder Door Cover Panel is crafted from high quality 6061 T6 billet aluminum that is then triple chrome plated and polished to a brilliant shine.

Easy Installation. Simply peel the two sided 3M tape from the back and set in place over the stock cup holder door panel for an easy 5 minute install. Go from boring stock to show winning custom in just minutes.

Application. This Chrome Cup Holder Door Panel Cover is designed to fit all 2010 to 2014 Mustangs, including the V6, GT, BOSS and Shelby GT500 models.

Fitment: 2010 2011 2012 2013 2014 Details

What's in the Box
  • (1) Chrome Cup Holder Cover
  • (1) Alcohol Prep Pad
    Hardware included:
  • None Required
Installation Info
Will it fit my Mustang?
  • Boss 302 - 12, 13
  • V6 - 10, 11, 12, 13, 14
  • GT - 10, 11, 12, 13, 14
  • GT500 - 10, 11, 12, 13, 14

Most Helpful Reviews

1/5
Not as good as expected

I have to disagree with the other reviews. I was hoping for a whole new cup holder door when I bought this but when I received it and realized I hadn't read the description carefully, I figured I would ...

Read More
Helpful (3)

5/5
Looks like factory original piece

This is a nice heavy chrome piece that fits very nicely with the appearance of my GT; I followed other reviewers advice when installing, and made sure to place it to the far left of the cup holder cover ...

Read More
Helpful (2)

Overall Rating 4.1 out of 5 stars
Read All 14 Reviews

Customer Photos (3) Submit Your Photo

View All 3 Photos

You Might Also Like

Q & A

No questions about this product yet.

Ask the First Question

More Products You Might Like

Customer Reviews (14) Write a Review

Overall Rating 4.1

out of 5 stars

Installation Time:Less than 1 Hour

  • Fit 3.785714 3.8
  • Appearance 4.357143 4.4
  • Bang For Your Buck 3.785714 3.8



  • 1/5

    Installation Time: Less than 1 Hour

    July 27, 2012

    Not as good as expected

    I have to disagree with the other reviews. I was hoping for a whole new cup holder door when I bought this but when I received it and realized I hadn't read the description carefully, I figured I would still keep it rather than return it. I tried installing it making sure it was aligned on the left, but the cup holder still wouldn't open. I removed it and reattached it only to find it was a little crooked. I installed it again, being very careful to make sure it was pretty far left and by now it was slightly warped. So now it doesn't sit totally flat. This thing collects fingerprints like nobody's business. And even after readjusting the installation twice, even giving it more than 1/4" gap from the right side, it still bangs against the console when you try to open it. Furthermore, I disagree that it looks like it came with the car. It is totally noticeable that it is just a piece of chrome sitting on top of the cup holder. It's not flush with the surrounding trim as a result. I'll probably cut my losses and remove this piece and stick with the plain ole plastic cup holder cover.

    V6Tim

    Year: 2011 Submodel: V6

    Helpful (3) (0)

    • Response from AmericanMuscle

      I'm sorry to hear you received a defective cup holder cover. If it was warped as you mentioned, that would be why it's not fitting properly. We'd be happy to set you up with a replacement or you can certainly return it. Please give us a call and let us know what you'd like to do!

      Lisa , Customer Care

  • 5/5

    Installation Time: Less than 1 Hour

    May 20, 2012

    Looks like factory original piece

    This is a nice heavy chrome piece that fits very nicely with the appearance of my GT; I followed other reviewers advice when installing, and made sure to place it to the far left of the cup holder cover to make sure it would not rub when opening the cover door. When I told friends I added it, they mentioned that it looks like it came with the car, and does not look like an after market item.

    JRocket

    Year: 2013 Submodel: GT San Francisco, CA, USA

    Helpful (2) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    June 30, 2015

    Nice Addition To The Interior But Prone To Scratches

    Like many other interior billet pieces, I knew this cover would be prone to scratches. My arm rest billet pieces added a few months ago are full of them despite being careful with them for shows. I sprayed several coats of clear enamel on this cup holder cover hoping this would minimize the scratches, but the clear paint scratches as much as the bare cover and is prone to fingerprints, too. I added this piece by placing it to the left of the lid after test fitting it, and the installation was easy. Overall, this is a nice looking addition to my interior although a bit pricey, but my concern is the scratching. I show my car and am careful with these billet pieces, but if this cover wears poorly, I may remove it. I hope not. It looks great in my interior and sets off the console. We'll see!

    RickMitchell

    Year: 2014 Submodel: V6 Baltimore, MD

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    December 23, 2014

    Easy - beautful

    It added a lot to my stang. Was easy to put on. You just have to play with it until it fits just right and the compartment door will open with out hitting.

    chackers

    Year: 2012 Submodel: V6 Monument, Colorado

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    September 30, 2014

    This product helps to customize the interior!

    The cover was easy to install but you need to locate it properly before you adhere it to the door so as to allow the door to open. It looks great once you install it. Five minute install including the time to line it up. I would recommend this if you really want to custimize the interior.

    Gordonnj

    Year: 2013 Submodel: V6 New Jersey

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    July 24, 2014

    Looks Great

    I debated on getting a logo or plain. I got the plain chrome and it looks outstanding.

    coachskip

    Year: 2011 Submodel: V6 Walnut Creek, CA, USA

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    July 14, 2012

    nice interior piece

    Wash stock cover with supplied alcohol pads. Place new cover on. Had to place some weight on it to secure. Make sure line up properly, so door will open an close properly.

    rspicel

    Year: 2010 Submodel: GT laurel road, Brunswick, Ohio

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    November 27, 2011

    Width too tight

    The Width on this product is too tight when opening and closing. It needs to be shaved a very tiny amount.

    Craig59

    Year: 2011 Submodel: V6 Newmarket, Ontario, Canada

    Helpful (2) (1)

  • 4/5

    Installation Time: Less than 1 Hour

    October 14, 2012

    Cup holder cover

    Looks great. Had to offset it a bit to keep cover from hanging up on the edge of the cup holder bin when opening.

    okielee

    Year: 2012 Submodel: GT Shawnee, OK, USA

    Helpful (1) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    October 02, 2012

    ALIGNMENT

    door doesn't close properly after install......I tried many times....couldn't align for door not to bind up.....but it looks fantastic...

    JohnnieBoy7

    Year: 2013 Submodel: GT Brooklyn, NY, USA

    Helpful (0) (2)

  • 1/5

    May 14, 2016

    Chrome cup holder cover

    Poorly made ... Don't waste your time or money ... Was expecting the whole flip cover .... It's jus a flimsy piece of metal with 3 m tape on the back .....

    Poeteet

    Year: 2013 Submodel: GT

    Helpful (0) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    March 23, 2012

    Sizzling Shiny Stuff

    I like this captivating chrome cup cover! As mentioned in some of the other reviews, a couple of cautions are: (1) It reflects light from the windows and (2) direct sun will heat the cover up enough to burn your hand or arm, however the cover is far enough forward where your arm would not normally be that close. (3) Again be sure that your final install is centered top to bottom and to the left side of the cup holder door for it to open properly. (4) Because it is chrome it will scratch pretty easy but for the seductive site it creates I think it is worth it.

    wingnuts

    Year: 2010 Submodel: V6

    Helpful (0) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    February 05, 2012

    Bright

    Fit well, but you have to be careful you can open the cover after installation. It does reflect a lot of light from the windshield - llike having a mirror between the seats. Does look nice though.

    Cooskevin

    Year: 2012 Submodel: GT Coos Bay Oregon

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    January 27, 2012

    Chrome Cup Holder Shines!

    This is an excellent interior chrome addition to your Mustang especially if you have already added other chrome parts. It is a very noticeable upgrade. First I felt like it reflected the sun too much (it's almost like having a mirror in your lower peripheral vision) but I got used to it quickly. In fact, I installed it first with removable tape just to make sure the reflection wouldn't bother me while driving but after about a week installed it with the 3m double-sided tape. Installation is very easy; just make sure you place it straight and in the middle as the part fits exactly over the existing cup holder. If you don't put it exactly in the middle you will not be able to open/close the cover.

    Mustangi2010

    Year: 2010 Submodel: V6 Vancouver, WA

    Helpful (0) (0)

Related Mustang Categories