WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping - Get it by Dec. 24th available on most items - Details

Speed of Sound Dual Gauge Pillar - Coupe - Charcoal (10-14 All)

AmericanMuscle no longer carries the Speed of Sound Dual Gauge Pillar - Coupe - Charcoal (10-14 All). Please check out 2010-2014 Mustang Gauges & Gauge Pods for an updated selection.
Market Price $169.99 You Save 18% ($30.00)

$139.99

FREE Shipping
  • Item 81010
  • MPN# 1M4C2C

Choose options to add to cart

AmericanMuscle no longer carries the Speed of Sound Dual Gauge Pillar - Coupe - Charcoal (10-14 All). Please check out 2010-2014 Mustang Gauges & Gauge Pods for an updated selection.

Features & Details

  • Accepts two 2-1/16" gauges
  • Dark Charcoal color
  • Matches OEM interior texture
  • Completely Replaces A-pillar
  • Fits all 2010 to 2014 Mustang Coupes
Monitor Critical Systems. Gauges are essential to keeping a close eye on your Pony's health. House them in style with this high quality Speed of Sound dual gauge pod. Located on your A-pillar, this dual gauge pod puts two 2-1/16" gauges (not included) where you can see them, but not block your view of the road.

Superior Fit and Finish. Featuring an OEM-matching texture and Dark Charcoal color, this gauge pod blends perfectly with your Mustangs interior. Unlike cheaper gauge pods, this pod is a full replacement for your A-pillar and arrives in the factory correct color, so you can just skip the tedious prepping and painting.

Application. This Speed of Sound Dual Gauge Pillar Pod is specifically designed for use on 2010 to 2014 Mustang Coupes, including the V6, GT and Shelby GT500. Will not fit convertible models.

Fitment: 2010 2011 2012 2013 2014 Details

What's in the Box
  • (1) Gauge pillar pod
Installation Info
Will it fit my Mustang?
  • Boss 302 - 12, 13
  • V6 - 10, 11, 12, 13, 14
  • GT - 10, 11, 12, 13, 14
  • GT500 - 10, 11, 12, 13, 14

Fits Coupe Only - gauges not included

Most Helpful Reviews

5/5
Great add-on!

This dual gauge pillar looks great and is a snug fit. The actual A-pillar is an OEM ford part, so it is the actual replacement part, but holes are just drilled into it and the gauge pods are attached on ...

Read More
Helpful (4)

5/5
Perfect fit and Looks like OE

The SOS gauge pod is the best on the market. They use an OE "A" pillar. The position of the gauges are easily seen but not in the way. Install took less than 20 minutes. If you need to mount gauges this ...

Read More
Helpful (4)

Overall Rating 4.7 out of 5 stars
Read All 19 Reviews

Customer Photos (16) Submit Your Photo

View All 16 Photos

You Might Also Like

1 Questions / 1 Answers

Ask a Question

Glass Roof? Does this fit 2011+ Mustangs with the glass roof? Thanks

RickI

  • Yes it does. I have a 2011 GT with a glass roof. Fits great!

    Tyndallcbr

    Good Answer (0) (0)

Answer This Question I need this answered (0) (0)

More Products You Might Like

Customer Reviews (19) Write a Review

Overall Rating 4.7

out of 5 stars

Installation Time:Less than 1 Hour

Installation Cost:$100-$250

  • Fit 4.5 4.5
  • Appearance 4.888889 4.9
  • Bang For Your Buck 4.222222 4.2



  • 5/5

    Installation Time: Less than 1 Hour

    August 24, 2011

    Perfect fit and Looks like OE

    The SOS gauge pod is the best on the market. They use an OE "A" pillar. The position of the gauges are easily seen but not in the way. Install took less than 20 minutes. If you need to mount gauges this is the way to do it.

    dacobra04

    Renton, WA.

    Helpful (4) (0)

  • 5/5

    August 12, 2011

    Great add-on!

    This dual gauge pillar looks great and is a snug fit. The actual A-pillar is an OEM ford part, so it is the actual replacement part, but holes are just drilled into it and the gauge pods are attached on there. This is nice because it looks like its from the ford factory. One issue is that one of the nuts that attach the pod to the pillar sticks out and the gauge wont fit in. So I just filed it down a bit until it was a snug fit. I had this professionally installed because the gauges are too advanced for me to install, but I know that that actual A-pillar is as simple install. I would recommend this product; it is a functional, stylish, clean finish.

    Andrew K.

    Helpful (4) (0)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: $100-$250

    March 12, 2014

    2011 Shelby GTS

    I'm setting up the car in anticipation of Procharging the V6. I got the SoS A pillar because I saw it on another Mustang in the area and it looked great. I only got two gauge pods because I was worried about blocking front oblique view but that worry was unfounded AFTER I had it installed. I had the FRPP gauges installed just to stay in theme with the Shelby package install. At the local cruises I get lots of looks at the car and people really like the SoS pod look. My advice, get the three gauge A pillar.

    tjys

    Honolulu Hawaii

    Helpful (1) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    October 16, 2013

    Looks Pretty Good But Not Perfect

    I went to install my gauge in the top pod and there was a rivet protruding not allowing my gauge to fit so I immediately have to start grinding on my precious new gauge pod. I got that taken care of and the rest of the install went like butter. The pods aren't perfectly aligned with each other but I can understand due to how they are attached. It's a decent deal for the money. People might think its expensive but its a factory replacement pillar cover and someone had to take the time to gouge it out for the pods and attach them halfway straight and they had to ship it too so not a bad deal. Just use some low profile rivets or something.

    RonJ

    Helpful (1) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    May 25, 2013

    Product installed easily

    Product snapped into place with ease like a stock piece, however after I installed it I had to take it down to make a few changes and the clip sort of separated but the pillar doesn't really hang from it. I was just disappointed that it broke so easily. The overall results are good though and I'm satisfied with it.

    Milgt

    Gulf Coast, Ms

    Helpful (1) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    January 14, 2013

    Speed of sound gauge pillar

    Excellent quality. My only concern is when seated in the drivers seat the 2 gauge pods don't line up perfectly. They are slightly out of line with each other.

    Tyndallcbr

    Florida

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    January 08, 2013

    TAKES 5 MINUTES AND LOOKS LIKE THE ORIGINAL

    This is definitely the easiest modification yet. In the past, I found it hard to get the 'plastic' interior pieces back together like it was from the factory, but with this item, it fits just like the factory A-pillar. The only place that didn't exactly line up, was the piece that you can only see while the door is open (near the hinges/dash part of the door) and no one else would ever notice. I was just looking for any imperfection. I paired this with the Aeroforce Interceptor gauges and they fit nearly perfect. The bottom gauge to be wrapped twice with electrical tape for a snug fit. You cannot tell the tape is there and isn't a deal breaker. It's a little pricey, but it is made very well.

    1stStang

    North Carolina, USA

    Helpful (1) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    December 20, 2012

    Average Quality

    The pod is basically average quality. It's a modified oem piece with pods riveted onto it. It looks pretty nice in the car, but the crooked top pod is a little disappointing considering the price. When I get time I plan on modifying it to make it straight.

    TonyH

    Ohio

    Helpful (1) (0)

    • Response from AmericanMuscle

      If your pillar has a defect, we'll surely ship out a replacement! Please give us a call at your earliest convenience so we can get this taken care of you!

      Lisa , Customer Care

  • 5/5

    Installation Time: Less than 1 Hour

    January 27, 2012

    great part !

    install was simple and easy , took less than 10 min . snaps right in . A must have for any enthusiast .

    HOLYWD

    TX

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    November 16, 2011

    awesome

    this is a factory a-pillar that has two pieces riveted on. i wish they would do an exchange where after you receive this you could send your a-pillar back and get some money back. 130$ is quite expensive for what you get.. one of the holes for the gauge fit dead on and the other was a bit loose so i put electrical tape around it like the other reviewer said. great spot for gauges. i recommend this but i just wish there was a way to make it cheaper.

    dstead14

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    July 27, 2012

    Super clean look

    Love this pod, I'm so glad I didn't get the bolt on universal type. So clean looking inside and a great aggressive touch.

    Chesty

    Ramstein-Miesenbach, Germany

    Helpful (0) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    May 24, 2015

    OEM Fit

    Snapped right in and looks good. I occasionally get a little buzz from it at idle, but I'm running billet motor mounts. Fit and color are OEM, I'm happy!

    Blueovalfever

    Loxahatchee, FL

    Helpful (0) (0)

  • 4/5

    Installation Time: Afternoon

    January 12, 2015

    Good

    Great product. But one pod insert had a tab and had to sand it off and took about 1 extra hour

    EVL50

    Fort Myers, FL, USA

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    May 17, 2013

    Excellent product!!!

    The SOS dual guage pillar is a top quality product that's offered at a fair and reasonable price. Very easy to install and provides excellent visibilty of your gauges.

    TLee70

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    April 04, 2013

    Well made, easy to install.

    Arrived quickly, in good shape, and installed in minutes. It matched perfectly with my interior and I couldn't think of anything negative about it. It would be nice to have the option to adjust the angle of the pods, for taller or shorter users... but that's not a need, just a want. I'm pleased overall with my purchase, as always with items from AM. Well done guys.

    IanM2011GTCS

    Pickerington, Ohio

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    January 18, 2013

    Nice gauge pillar

    The gauge pillar fits nice and looks like it came from the factory. The gauge pods are placed at just the right angle. Overall very pleased with the fit, finish and functionality of the pillar.

    BoostedCoyote

    NC

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    May 27, 2012

    Great Product!!!

    The pillar-Pod modifications are done very well. You cannot tell it was at all modified and the placement and angle of the pods looks great on my car. I feel they look far better than the other pillar pod modifications offered by other companies. Speed of Sound even offers a installation video on their web site to help you see how simple it is to install. Great fit and finish.

    GT500Owner

    St Louis, MO, USA

    Helpful (0) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    April 22, 2012

    Great Look

    This gauge pod is a genuine OEM replacement, same bar code as the one you pull off. They just did a little modifying on the back side and installed the pods. Just pry the old one off starting at the top and working your way down, start at the bottom to install the new one. You may need to wrap your guages with tape or a foam sticky pad to get a snug fit, not that big a deal.

    Mike46

    Chunchula, Al

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    April 08, 2012

    2011 mustang V6 SOS gauge pillar pod

    This is the second time I've used Speed of Sounds gauge pillar pod. 1st was in my 04 Mach 1. This time on my 2011 Mustang V6. Fit is perfect! Exact match to the original a-frame pillar. Gauges have to be moved around a bit to get the right fit. Couldn't get my mechanical oil pressure gauge in there with a braided stainless line, not enough room for the line to turn, even with a 45 or 90 degree elbow...so I went with a vent pod for that gauge. Water temp and boost gauge fit in the SOS pillar perfectly! It's a little bit expensive, but the fit and finish is better than the alternative.

    MachRMan

    Fort Lauderdale, FL, USA

    Helpful (0) (0)

Related Mustang Categories