Improve ET's And Low End Torque.
Are you looking to get more low end grunt off the line and lower your ET's at the same time? Then look no further than installing a set of steeper gears in your Pony. Ford Racing Ring and Pinion Gears are perfect for street, road, or race use.Superior Quality.
These Ford Racing 4.10 Mustang ring and pinion gears feature a super strong forged construction, CNC cut & lapped gear teeth, and a black oxide finish to resist corrosion.Recommended Upgrade.
Changing the rear axle gear ratio will throw off the calibration of your Mustangs speedometer, but a new Speedometer Gear
is an inexpensive way to fix this issue.Application.
This Ford Racing 4.10 Ring and Pinion Gear set will fit all 1994 to 1998 V6 Mustang models equipped with a 7.5" rear end. A master bearing kit is recommended by most installers, especially on high mileage vehicles, see drop down option above.
Technical Note. Installation costs will vary, but a good rule of thumb is between $250 and $300. Be sure to work with a reliable shop that you trust for installations.
1994, 1995, 1996, 1997, 1998 Details >>