Win $500 Towards Your Project Car Enter Now
1-888-332-7930 M-F 9-9,Sat 9-5:30,Sun 12-4 ET

Free Shipping on Everything. Seriously. Details

Ford Racing High Performance 9mm Spark Plug Wires - Blue (96-98 Cobra)

14 Reviews
Our Price

$109.99

  • Item #50368
  • MPN# M-12259-C464

  • Market Price $131.99
  • You Save 17% ($22.00)
In Stock Ships same business day.
Free Shipping on Everything
Customer Photos
Features
  • More Spark equals more power
  • Low resistance
  • EMI & RFI suppression
  • Blue wires with black boots
  • Sold as a set of 8 wires
  • Fits 1996 to 1998 SVT Cobra Mustangs
Description
More Spark. Ford Racing Ignition Wires feature a low resistance conductor for minimum spark loss and more power. The wires are wrapped in a durable blue silicone insulation with black silicone boots that are resistant to heat, fuel, oil, and solvents.

EMI suppression. Ford Racing uses a wire wound conductor that provides greater suppression of Electro Magnetic (EMI) and Radio Frequency Interference (RFI) to shield your Mustangs sensitive electronics.

Application. These Blue Ford Racing 9mm Spark Plug Wires are sold as a set of 8 and are designed to fit the 1996 to 1998 SVT Cobra Mustangs equipped with a four valve 4.6L V8 engine.

Mustang Fitment: 1996 1997 1998 Details

What's in the Box
  • (8) Spark plug wires
Installation Info
Fitment
  • Cobra - 96, 97, 98

Most Helpful Reviews View All

Overall Rating 4.7/5
5/5
Product is a GREAT upgrade

My 1997 Cobra had a misfire and i couldn't figure out why for a while, i went and bought these wires from AM and the problem is gone! Seems to idle smoother, and start better from a cold start. I would

Read More
Helpful (3) (0)

5/5
Ford Racing 9mm Spark Plug Wires

I had developed a miss on my 1997 Mustang Cobra at higher rpm range. The plug wires were the original wires and I had heard from previous owners that they would eventually go bad. I purchased the Ford

Read More
Helpful (2) (0)

Customer Photos (1) View All

You Might Also Like

Q & A (1 Questions, 3 Answers) Ask a Question

Msd coil pack capable? I was wondering if this set works with the 96 GT MSD coil pack? The blue wires would look awesome with the red coil pack.

Joseph156 Year: 1996 Model: GT

Question Resolved
Good Question (0) (0)
  • Oh yea that's not a problem it'll work

    Helpful (0) (0)

    bones Year: 2003 Model: GT

Show 2 more answers

Reviews (14) Write a Review

  • 5 Stars .86 86%
  • 4 Stars .07 7%
  • 3 Stars 0 0%
  • 2 Stars .07 7%
  • 1 Stars 0 0%
4.7

out of 5 stars

14 Customers Recommend this Product

Installation Time:Less than 1 Hour

  • Performance Gain: 4.642857 4.6/5
  • Fit: 4.5 4.5/5
  • Bang For Your Buck: 4.5 4.5/5
Filter By Sort By
  • 5/5 Yes, I recommend this product

    February 17, 2013

    Product is a GREAT upgrade

    My 1997 Cobra had a misfire and i couldn't figure out why for a while, i went and bought these wires from AM and the problem is gone! Seems to idle smoother, and start better from a cold start. I would highly recommend this product as an upgrade over your stock wires.

    Whyxitx

    Year: 1997 Model: Cobra Driving Style: Daily Driver 'Stangs I have owned: 2 Lincoln, NE, USA

    Helpful (3) (0)

  • 5/5 Yes, I recommend this product

    December 26, 2012

    Ford Racing 9mm Spark Plug Wires

    I had developed a miss on my 1997 Mustang Cobra at higher rpm range. The plug wires were the original wires and I had heard from previous owners that they would eventually go bad. I purchased the Ford Racing 9mm wires as I also drive the car at road race courses several times a year and wanted the best quality plug wires for the car. The installation of the plug wires and also Motorcraft spark plugs took about 2 hours. I took the cold air pipe off to make access easier to the passenger side. The installation of these wires was easy and the wires are marked with the cylinder numbers for easily matching to the correct plug location. If you purchase these wires, be sure to get wire looms for 9mm wires as the stock wire looms will not fit the larger 9mm wires. After the installation, I test drove the car and the miss was gone. The plugs and wires gave the car added power thru the whole rpm range up to 7200rpm.

    97TNCobra

    Year: 1997 Model: Cobra Driving Style: Race 'Stangs I have owned: 5+ Knoxville, TN, USA

    Helpful (2) (0)

  • 4/5 Yes, I recommend this product

    August 27, 2012

    nice looking wires

    I put these on my 1996 cobra. The bluw wires look really good under the hood, and the "Ford Racing" logo is a nice touch, as far as looks go. Each wire is also numbered which greatly helps installation. As fas as installation goes, this is actually pretty easy. The Driver's side cylinder bank is easily accesible, The passenger side requires the removal of the rubber air tube coming formt he air filter (if your car is stock). It was possible to change all the spark plugs without removing the strut brace. I'm not sure which would take longer,reaching around the brace or just removing it and reinstalling it afterward, but neither seems all the hard. The most challenging part of this install was reattaching the air tube, it is a tight fit, and since we did remove the air filter housing it took a little muscle. As far as perfomance gains go I haven't noticed anything super, but the car seem to run "smoother". In the end this was mostly a "for looks" upgrade. Bottom line... Pros - easy install, nice look, Like the Ford logo and wire numbers, seems to have helped engine run more smoothly Cons - none really, only thing I found was that these wires have a bigger diameter than the stock ones and all but one of the retaining clips that came on the car (which are old and brittle) broke.

    1996Cobra

    Year: 1996 Model: Cobra Driving Style: Daily Driver 'Stangs I have owned: 3 West Virginia

    Helpful (2) (0)

  • 5/5 Yes, I recommend this product

    April 13, 2013

    FRPP Plug Wires

    These wires ARE superior to all others. Ford Racing knows their business, trust me. When all aspects are considered, these wires are the best. FRPP spark plug wires fit inside the plug well so perfectly that you can hear the air being forced out. These wires snap right on to Ford AND aftermarket coils (WeaponX), no struggling at all. They function perfect, fit everywhere perfect, plug wires have cylinder numbers discreetly labeled on each one. AND, they smell good. How can you beat that for the price? You can't!

    Top 25 Contributor

    Robb

    Year: 1996 Model: Cobra Driving Style: Daily Driver 'Stangs I have owned: 2 Northern Virginia

    Helpful (1) (0)

  • 5/5 Yes, I recommend this product

    February 17, 2013

    Great product!

    Fast shipping, product delivered as described. Only wires I will run on my car!!!

    dcadams

    Year: 1997 Model: Cobra Driving Style: Street / Strip 'Stangs I have owned: 2 Jesup, GA, USA

    Helpful (1) (0)

  • 5/5 Yes, I recommend this product

    January 15, 2015

    Cured An On Throttle Misfire

    Bought these to replace the OEM wires that were original to the car, and they made a great difference. There was originally a stutter when you punched it in all gears, and that has gone away completely. This also gave a much smoother idle over the original equipment, and they're a great price for something that's a Ford product. No issues with fitment on the factory coils, but the wire holders were a little tedious to force back together. That's a given though, seeing as these are thicker than factory. Definitely something to do to an older/higher mileage car.

    Devin1333

    Year: 1997 Model: Cobra Driving Style: Daily Driver 'Stangs I have owned: 2 Charlotte, NC

    Helpful (0) (0)

  • 5/5 Yes, I recommend this product

    December 18, 2014

    Great Spark!!!

    Outstanding product and fast shipping. Cant go wrong with Ford Racing products and the great service that American Muscle provides.

    Izzy98

    Year: 1998 Model: Cobra Driving Style: Daily Driver 'Stangs I have owned: 3 Laredo, TX, USA

    Helpful (0) (0)

  • 2/5 Yes, I recommend this product

    October 28, 2014

    Does what they are supposed to....

    Ford Racing wire (9mm wire wound) are produced in the USA (Paragould, Arkansas to be exact) but, the wire harness (cut to length, boots installed, etc...) is assembled in Mexico. During the wire manufacture, my set was scratched and has a white line in the blue silicone jacket on two of the wires that runs the full length. They are cut a little longer than factory so the routing takes a little extra time and the factory wire separators don't work since these are a slightly larger diameter. The boots did fit well and these spark plug wires cured the miss that was occurring due to the worn out factory set. They will get the job done.

    Speedracer93

    Year: 1996 Model: Cobra Driving Style: Street / Strip 'Stangs I have owned: 5+ Arkansas

    Helpful (0) (0)

  • 5/5 Yes, I recommend this product

    August 27, 2014

    Big performance difference

    I had a miss that new plugs did not solve. These new wires along with new MSD coil pack got rid of the miss and provide renewed power so I can now smoke the tires after the clutch is fully engaged. It is a little more work to install since they are 9mm and the stock wires are 8mm however it is well worth the extra effort. Also, note the wires are numbered something I found out after installation. Enjoy, they are worth the money.

    Chaos1

    Year: 1997 Model: Cobra Driving Style: Daily Driver 'Stangs I have owned: 2 Ruther Glen, VA

    Helpful (0) (0)

  • 5/5 Yes, I recommend this product

    May 13, 2014

    Ford racing plug wires

    Nice wires bought these to replace brand x plug wires. Only reason it took the afternoon the old plug wires came out in pieces also got rid of my miss i had.

    mustang42

    Year: 1998 Model: Cobra Driving Style: Daily Driver 'Stangs I have owned: 5+ DeWitt, MI, USA

    Helpful (0) (0)

More Products You Might Like

Related Categories