- (4) Wheels
- (4) Center Caps
- (4) Tires
- Hardware included:
- None Required
Add FREE Nitrogen Fill
Add TPMS Sensor Kit (recommended for 2007+)
Add TPMS Sync Tool
Note: The stock lug nuts (13/16”) prove to be too large when used in conjunction with these wheels. Please take a look at the Lug Nut Ordering Options above for some compatible options.
Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Details
Free Mounting & Balancing: Professional mounting & balancing is available on all wheels and tires when purchased together on the same order, so you can just swap your wheels in your driveway when they arrive. We even offer Free Nitrogen tire fill (see option above).
What is TPMS? The Tire pressure Monitoring System is a safety feature on all 2007+ Ford Mustangs that alerts you when your tire pressure drops to an unsafe limit.
How do I keep my TPMS feature? Aftermarket wheels don't have TPMS sensors. If you select 'Add TPMS Sensor Kit' and 'Add TPMS Tool' at the top of the page when you order your wheels, then chose Free Mounting & Balancing when you add tires, we'll install the sensors for free!
Difficulty Level:Simple installation for anyone
|Size:||19x9 / 19x10||Finish:||Gunmetal|
|Placement:||Front and Rear||Centercap Size:||N/A|
|Back Spacing:||6.4” (163mm) / 7.1" (181mm)||Offset:||+35mm (1.4") / +42mm (1.7")|
|Material:||Aluminum||Lip Size :||N/A|
|Best Tire :||Included||Year/Model:||2005-2012 V6, GT, Bullitt, & Shelby GT500|
I was pretty disappointed to find that these wheels were extremely heavy. Over 60 lbs per wheel/tire (~20 lbs heavier than stock). Also, when I bolted up the first rear wheel, it felt like the bolt pattern ... was slightly off. When tried to install the second rear, the bolt pattern was WAY off, It was for a much larger diameter bolt circle. I decided to send the whole set back. Not really the fault of American Muscle, but I think Forgestar has some quality control issues. Also, these wheels are only partially forged. The spokes and hub are cast as evidenced by the sand casting marks on the back of the hub. Also the spokes are extremely thick with no pocketing in the back. I'll attempt to upload a picture of the bolt pattern error.
Hey Justin here with AmericanMuscle.com, and I’m checking out Forgestar’s F15 monoblock wheels, available in your choice of either matte black, gun metal, piano black, and silver, fitting all 2005 and newer Mustangs. At first glance you can see the design of the F14 Is more of a multispoke mesh wheel design, which has become extremely popular with the Mustang crowd as of late, which is course due to cars such as the RTR and the 2013 GT 500, both of which sport a variation of the mesh wheel design. These monoblock or one piece aluminum wheels go through an advanced process during production called rotary forging, this greatly improves the strength of the wheel, specifically the barrel, and generally reduces the weight of the wheel itself. The F14’s are offered in a wide variety of sizing options including an 18, 19, and 20 inch diameter, and in 9, 10, and 11 inch widths. Because there are a few different width options available, you can easily achieve that classic staggered look, by sticking a wider rear wheel and tire in the back versus the front, which in my opinion is the only way to roll. Chances are if you’re buying new wheels, you’re going to need new tires, we offer a pre built combinations, where we pair your F14’s up with some of the top tires on the market today, in sizes that are guaranteed to fit your car without rubbing, even if you’re lowered an inch or two. Of course you can also take advantage of our free mounting and balancing, free shipping and handling. Finally, all Forgestar wheels are backed by a lifetime structural warranty. When it does come time to install your new wheels just grab a floor jack and some basic hand tools. You’ll want to crack the lugs loose first on the stock wheels before getting the car in the air, after you do that, jack the car up and swap the 4 wheels and tires. Doesn’t get a lot easier than this, but since there is a little work involved, we’ll call it an hour from start to finish. So if you’re looking to take a break from the standard 5 spoke wheel and you want to go with a more modern multispoke mesh wheel design, then be sure to check out these quality lightweight aluminum wheels from Forgestar available right here at AmericanMuscle.com View Full Transcript
April 01, 2016
Beware of Bolt Pattern Errors! Heavy Wheels
I was pretty disappointed to find that these wheels were extremely heavy. Over 60 lbs per wheel/tire (~20 lbs heavier than stock). Also, when I bolted up the first rear wheel, it felt like the bolt pattern was slightly off. When tried to install the second rear, the bolt pattern was WAY off, It was for a much larger diameter bolt circle. I decided to send the whole set back. Not really the fault of American Muscle, but I think Forgestar has some quality control issues. Also, these wheels are only partially forged. The spokes and hub are cast as evidenced by the sand casting marks on the back of the hub. Also the spokes are extremely thick with no pocketing in the back. I'll attempt to upload a picture of the bolt pattern error.
August 13, 2014
Love these Wheels
I just installed these on my 2014 Mustang GT. The Gunmetal is a perfect fit with my Ingot Silver car. It's just dark enough for contrast but not too dark. These wheels just look like they were meant to be mounted on a Mustang.
April 22, 2016
Amazing Wheel Tire Kit
If you're looking for a good quality wheel, this is it! Purchased about two months ago, and they shine like new. Picked the Mickey Thompson tires, and I couldn't be happier. I had this kit swapped out with my stock set within an hour with basic hand tools in my driveway. Way to go American Muscle!