Stage 1 - Handling Pack
Now you can improve the handling performance your 4.6L V8 Mustang with an AmericanMuscle Stage 1 - Handling Pack. This Stage 1 Mustang Handling Package includes Eibach Pro-Kit Springs
, J&M Caster Camber Plates
, and Front
& Rear Polyurethane Spring Isolators
This Stage 1 Handling Pack is specifically designed for use on the 1994 to 2004 Mustang coupes, including the GT, Bullitt, Mach 1 and 1994 to 1998 SVT Cobra models. Will not
fit 1999 to 2004 SVT Cobras with Independent Rear Suspension (IRS). Does not
fit convertibles.Eibach Pro-Kit SpringsImproves Handling; Aggressive Stance.
The Eibach Pro-Kit Spring Kit will lower your Mustang's center of gravity, reducing squat during acceleration, body roll in the corners and excessive nose-dive under hard braking. This kit will also improve the overall appearance of your Mustang with a low aggressive stance. Estimated drop: 1.5" up front; 1.5" in the rear.J&M Caster Camber PlatesPerfect Alignment.
Ideal for lowered Mustangs the J&M 4-bolt caster camber plates replace the stock factory rubber strut mount bushings with a spherical bearing, which allows you to fine-tune your Mustangs suspension geometry for a perfect alignment.Front Polyurethane Spring IsolatorsSuperior Material.
Made from polyurethane that has been impregnated with graphite, these front spring isolators will not dry out and crack like the stock factory rubber pieces and they will greatly improve the handling of your lowered pony.Rear Polyurethane Spring IsolatorsSuperior Material.
Made from polyurethane that has been impregnated with graphite, these rear spring isolators will not dry out and crack like the stock factory rubber pieces and they will greatly improve the handling of your lowered pony.
1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Details >>