How to Install a Black JLT Oil Separator - Driver Side on your 2011-2013 Mustang GT

This Mustang Parts Installation Guide Works For

JLT Black Oil Separator - Driver Side (11-14 GT; 12-13 Boss)DOWNLOAD PDF

Tools Required

Installation Time: 30 Minutes

Installation

Remove stock PCV line you are replacing by releasing the plastic tangs and pull the hose off the fittings. Then install new JLT assembly in its place, done!

TO CHECK TANK: REMOVE UNIT FROM VEHICLE/HOLD TOP AND UNSCREW BOTTOM. DO NOT TWIST TANK WHILE INSTALLED

satin-jlt-oil-separator-passenger-side-11-13-v6

To properly clean the filter in the oil separator, remove it with a pick or small screw driver and spray any degreaser or solvent through it and let it air dry. Clean it every 5,000 miles. Thanks for the business. If you have any questions, please e-mail Jay@JLTtruecoldair.com or call 757-335-1940. Our hours are Monday-Friday. 8:00am - 5:00pm Eastern Time.