Free Horsepower: Win a C&L Cold Air Intake & Bama Performance Tuner Enter to Win
1-888-332-7930 M-F 9-9 EST, Sat 9-5:30 EST

Free Shipping on Everything. Seriously. Details

How to Install a Black JLT Oil Separator - Passenger Side on your 2011-2013 Mustang V6

Installation Time

30 minutes

American Muscle
Shop Parts in this Guide

Installation

Installation

Remove stock PCV line you are replacing by releasing the plastic tangs and pull the hose off the fittings. Then install new JLT assembly in its place, done!

TO CHECK TANK: REMOVE UNIT FROM VEHICLE/HOLD TOP AND UNSCREW BOTTOM. DO NOT TWIST TANK WHILE INSTALLED


To properly clean the filter in the oil separator, remove it with a pick or small screw driver and spray any degreaser or solvent through it and let it air dry. Clean it every 5,000 miles. Thanks for the business. If you have any questions, please e-mail Jay@JLTtruecoldair.com or call 757-335-1940. Our hours are Monday-Friday. 8:00am - 5:00pm Eastern Time.

This guide applies to Mustang years: 2011, 2012, 2013, 2014, 2015 and Submodels: V6