JLT Performance PCV Pre-Filter (96-04 Cobra, 01 Bullitt, 03-04 Mach 1, 03-04 Marauder) - Installation Instructions

This Mustang Parts Installation Guide Works For

JLT Cold Air Intake (03-04 Cobra)DOWNLOAD PDF

Tools Required

Installation Time: 60 Mins

Installation

Installation - 96-04 Cobra:

  1. Driver Side: Pull out your PCV valve, screw Pre-Filter into grommet in valve cover, reinstall PCV valve into this grommet in the Pre-Filter and hook up factory PCV line as shown:

    JLT Performance Mustang PCV Pre-Filter 1

  2. Passenger Side: Pull out hose and fitting from grommet in valve cover. Screw Pre-Filter into grommet, screw 90 degree fitting into Pre-Filter and reconnect hose as shown.

    JLT Performance Mustang PCV Pre-Filter 2

Installation - 03-04 Mach 1:

  1. Driver Side: Pull off rubber 90 degree elbow and set aside. Use short section of 5/8" hose to connect the PCV valve to the Pre-Filter, screw 90 degree fitting into grommet in Pre-Filter and use remaining hose to connect to the factory hard PCV line as shown.

    JLT Performance Mustang PCV Pre-Filter 3

  2. Passenger Side: Pull out hose and fitting from grommet in valve cover. Screw Pre-Filter into grommet, screw 90 degree fitting into Pre-Filter and reconnect hose as shown.

    JLT Performance Mustang PCV Pre-Filter 4

Installation instructions provided by JLT.