Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping on Everything. Seriously. Details

JLT Performance Next Generation Ram Air Intake (99-01 Cobra)

12 Reviews
Our Price

$259.00

  • Item #62046
  • MPN# RAI2-FMC-9901

  • Market Price $293.99
  • You Save 12% ($34.99)
In Stock Ships same business day. Choose options to add to cart
Free Shipping on Everything
Product Videos Customer Photos
Features
  • Increases of 10 to 14 More Horsepower
  • Better Throttle Response
  • Reusable S&B High Flow Air Filter
  • Black Textured 4-1/4" ID, Roto Molded ABS Plastic
  • Easy Installation
  • No Tune Required
  • CARB EO Number: D-761
  • Fits 1999 to 2001 SVT Cobra
Description
More Usable Horsepower. With a JLT Performance "Next Generation" Ram Air Intake installed under the hood of your 1999 to 2001 SVT Cobra you can expect to see average performance gains of 10 to 14 horsepower at the rear wheels. In addition to an increase in horsepower you will also see an impressive improvement in throttle response.

Heat Shield Included. The JLT Performance Ram Air Intake includes a vacuum formed ABS plastic heat shield that not only looks great, but blocks out excessive under hood engine heat at low speed and idle that can rob you of power.

Money Saving Reusable Filter. JLT ram air intake kits come complete with a 4x9 high flow reusable S&B brand air filter. So that means there is no need to go out and buy a new filter every few thousand miles. Now you can just clean the filter, re-oil it, save money, and go!

Easy Installation. The JLT Performance "Next Generation" Ram Air Intake kit was designed to install with just basic hand tools. No extra modifications or special tools are required for an easy 1 hour installation.

CARB Certified. Best of all this Mustang JLT Performance Cold Air Intake Kit is 50-state smog legal under Carb EO# D-671.

Application. This JLT Performance "Next Generation" Ram Air Intake System is specifically designed for use on the 1999 to 2001 SVT Cobra Mustangs equipped with the DOHC 4.6L V8 engine and does not require re-tuning the vehicles computer for operation.

Technical Note. Will not fit with most strut tower braces.

Fitment: 1999 2001 Details

What's in the Box
  • JLT plastic intake tube
  • Throttle body elbow
  • Silicone reducer
  • ABS Heat Shield
  • 4x9 S&B powerstack air filter
  • MAF adapter
  • MAF adapter gasket
  • HD Clamps & all needed hardware
Installation Info
Tech Specs
Cold Air Intake Specifications
Year/Model: 99-01 Cobra Filter Placement: Engine Bay
Material: ABS Finish: Black
Manufacture: JLT Performance Computer Tune Required: No
Will it fit my Mustang?
  • Cobra - 99, 01

Will not fit with most strut tower braces

Most Helpful Reviews

5/5
High Quality and Easy Install

The JLT Performance Next Generation Ram Air Intake installation took just over a hour. The install was easy with no problems experienced. Very impressed with the workmanship of JLT Performance. All parts ...

Read More
Helpful (5)

5/5
Great Mod for the money.

First off, I am no mechanic. I installed this kit in a couple of hours. I am sure it can be installed faster but, I took my time as I wasn't in a hurry. I would totally recommend this kit to anyone looking ...

Read More
Helpful (5)

Read All 12 Reviews
Overall Rating 4.8 out of 5 stars

Video

Customer Photos (5) View All Photos

You Might Also Like

Q & A

No questions about this product yet.

Ask the First Question

More Products You Might Like

Customer Reviews (12) Write a Review

Overall Rating 4.8

out of 5 stars




  • 5/5

    Installation Time: Afternoon

    December 30, 2012

    Great Mod for the money.

    First off, I am no mechanic. I installed this kit in a couple of hours. I am sure it can be installed faster but, I took my time as I wasn't in a hurry. I would totally recommend this kit to anyone looking for a simple install and a quality product. JLT Performance hit this out of the park! By itself, this kit is really good. Combine it with a custom tune... OH MY!!! My car has never been more exciting to drive!

    JerryT

    Year: 2001 Model: Cobra Driving Style: Daily Driver 'Stangs I have owned: 3 Phoenix, AZ, USA

    Helpful (5) (1)

  • 5/5

    Installation Time: Afternoon

    September 04, 2012

    High Quality and Easy Install

    The JLT Performance Next Generation Ram Air Intake installation took just over a hour. The install was easy with no problems experienced. Very impressed with the workmanship of JLT Performance. All parts in the kit were high quality with excellent fit and finish. Would recommend this product without hesitation.

    LSCav

    Year: 2001 Model: Cobra Driving Style: Daily Driver 'Stangs I have owned: 3 Greensboro, NC, USA

    Helpful (5) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    November 01, 2013

    Jlt ram air kit

    I had the bbk cold air intake, didnt like it because its hard to service the filter in the fender and a pain to get to, got this ram air kit and fit perfectly , and jlt ram air kit no metal tubing , felt better throttle response than bbk cold air kit And easier to service filter on engine bay

    Andres0684

    Year: 1999 Model: Cobra Driving Style: Daily Driver 'Stangs I have owned: 3 Midland, TX, USA

    Helpful (2) (0)

  • 5/5

    May 01, 2016

    Great part!

    I replaced my poor fitting bbk cold air kit with this ram air from Jlt. This kit actually fits without rubbing or shaking under acceleartion. It is easy to maintenance and the install was so easy.

    RoyCobra180

    Year: 2001 Model: Cobra Driving Style: Street / Strip

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    March 14, 2016

    *****Holy Deep Breath Batman*********

    One of the best mods I have spent money on....Seat of the pants to say the least. Stock plenum was my restriction. Easy Install, no time at all......JLT Next Gen Ram Air for my Cobra was like a Bronchodilator for an asthmatic.

    Wessgt

    Year: 2001 Model: Cobra Driving Style: Street / Strip 'Stangs I have owned: 1

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    September 24, 2015

    1999 SVT Cobra

    I have a 1999 SVT Cobra and when I bought the car it had a very work out, beat up KandN cold air intake. When I put on the new JLT intake it not only made it look cleaner under the hood it made a drastic improvement on throttle response, fuel economy, and power. My car runs better with cleaner air and I'm very impressed. I would definately recommend this product to anyone who needs a new intake.

    Wes

    Year: 1999 Model: Cobra Driving Style: Daily Driver 'Stangs I have owned: 1 Medford OR

    Helpful (1) (0)

  • 3/5

    Installation Time: Less than 1 Hour

    July 23, 2014

    jlt intake

    I bought this for my 96 cobra with an 99 b head engine. Since the engine bay is the same on new edge cars (or really close) I would imagination the fitment is the same either way. I ended up sending it back because I wasn't impressed with how it fit and it wouldn't clear my factory strut tower brace. Since I have a 96 I have to use strut tower braces that match the factory mount holes it would be tricky to get it to work and be able to keep the brace on my car. I would say this is probably the best off the shelf intake that keeps the filter in the engine bay. Can't comment about performance. I was impressed by the filter size and quality and bought one for my custom intake.

    nbvmmjmjmgj

    Year: 1996 Model: Cobra Driving Style: Daily Driver 'Stangs I have owned: 1

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    September 11, 2013

    The performance improvement's very good.I have had 19 mustangs

    I'm so pleased with the fit and finish, just great, performance and throttle response much better, I'm a happy camper.

    99snake

    Year: 1999 Model: Cobra Driving Style: Daily Driver 'Stangs I have owned: 10+

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    March 22, 2016

    Replaced the old KN air filter

    Looks nice, performs well, improved the acceleration. Took about 30 minutes to install.

    mdwebguy

    Year: 1999 Model: Cobra 'Stangs I have owned: 5+

    Helpful (0) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    May 31, 2015

    Nice product and very pleased with JLT.

    I like the quality of the intake and also the performance gains from the quick installation. I did run into some fitment issues though. For some reason the 9" filter wouldn't fit in my car, called JLT and they sent me a new 6" filter next day for no charge! Very pleased with this intake and with JLT.

    JimmbowSVT

    Year: 1999 Model: Cobra Driving Style: Daily Driver 'Stangs I have owned: 1 Plymouth, MN

    Helpful (0) (1)

Related Mustang Categories