Bullitt Deep Dish Matte Black Wheel - 18x10 (05-14 GT, V6)

Bullitt Deep Dish Matte Black Wheel - 18x10 (05-14 GT, V6)
Click to Enlarge

TRANSCRIPT

Hey everyone Iím Justin with AmericanMuscle.com and Iím taking a look at the classic mustang wheel design and by far our most popular wheel here at AmericanMuscle, Im referring to these Bullitt wheels for all 2005 and up model mustangs in either chrome, matte black, anthracite silver or gloss black. Bullitt wheels have long been the favorite of many Mustang owners out there, from the classic 60s roots to the factory built for Bullitt mustangs in 2001 and then again in 08 and 09, it's easy to see why these wheels look so good on Mustangs of all ages. Wheels are available in 17, 18, 19, and 20 inch diameters and are offered in both staggered and non-staggered fitments. They are also offered with a very cool deep dish option that refers to the lip around the wheel itself, as you can see the face of the wheel is set further back into the rim resulting in a nice thick lip which looks very tough. As I mentioned before these wheels are available in both staggered and non-staggered fitments. Now, staggered fitment means your rear wheels and tires are going to be wider than your fronts, thatís exactly what weíve done with our 06 GT here, we have the 9s up front with the 10s our back resulting in that classic muscle car stance. Now this is also better for your traction and handling as well thanks to the fact that you are able to run a wider rear tire so you can help get that power down to the ground. If youíre not a fan of staggered fitment then you might want to check out our non-staggered or standard fitment like we have installed on our 07 GT back there on the lift, we have the matte black standard 17x9s on all four corners and as you can see it looks really sharp. Or say you really want to change up the look of your ride and you live and die by the saying bigger is always better, well if that sounds like you then you will definitely want to check out our 20x8 1/2s on our 2011 GT back there on our dyno jet whichever finish you end up going with you can rest assure that every wheel is covered by our 1 year finish warranty and a lifetime structural guarantee. You can get these wheels by themselves or in one of our pre-built tire and wheel combos which pair your new Bullitt wheels up with some of better performing tires on the market today in sizes that are guaranteed to fit without rubbing even if you are lowered an inch or two, you also get to take advantage of our free mounting and balancing, optional nitro fill and free shipping and handling. Of course with you 2007 and up guys youíll want to remember your TPMS sensor when ordering your new wheels. You donít want your new wheels to be held on by some rusty looking lug nuts, this will be a great time to ditch those eyesores and get a new lug nut to better fit your new Bullitt wheels and of course you want to pick up some wheel locks to protect your investment. Installing a new set of wheels and tires is something any backyard mechanic should be able to tackle, all you need to do is simply crack your lug nuts loose first while the car is still on the ground then jack your car up and switch the wheels, itís just that easy. Using a basic floor jack and hand tools that should take you no more than an hour, so if you are looking to evoke that classic muscle car styling on your modern ride, these Bullitt wheels from American Muscle will give you an aggressive look that is sure never to go out of style.
... READ MORE
OUR PRICE$154.99(each)
Market Price $189.99You Save 18% ($35.00)
Item # 28305
Ships the same business day
Add TPMS Sensor Kit (recommended for 07+)
Add TPMS Tool (required to sync sensor kit)
Add Set of 20 Lug Nuts
PRICE WITH OPTIONS $154.99
Email

Product Features

  • Muscular Bullitt Design
  • Matte Black finish with satin machined lip
  • Deep lip creates an aggressive stance
  • 18x10 - rear only
  • Fits 2005-2014 V6 and GT Mustangs
Classic Bullitt Muscle. Show off your proud pony heritage with the muscular good looks of the iconic Bullitt rim, the classic five spoke design makes it the perfect wheel for your Mustang. Designed for a staggered setup, this rim looks incredible with our matching 18x9 matte black Bullitt rims in the front.

Deep dish. The dramatic deep lip exaggerates width for an aggressive stance that commands attention.

Matte Black Finish. Completed in a "Matte Black" finish for a sinister appearance that everyone will be envious of. This wheel features a machined lip with a satin clear-coat for a stealthy presentation, that protects against chipping and pitting with the added benefit of never noticing brake dust.

Lifetime Warranty: Our wheels have a lifetime structural warranty, which means you'll never have to worry about the workmanship of your new wheels.

1 Year Finish Warranty: Your new Mustang wheels have a 1 year warranty against defects in the finish of your wheels. Drive them daily, not just to the shows! For more information on wheel warranties, click here.

Application.
  • Fits rear only on 2005-2014 V6, GT and Bullitt Mustang models.
  • Does not fit the Shelby GT500 or aftermarket Big Brake Kits.
  • Stagger with 18x9 Bullitt's on the front for a classic muscle car stance & improved traction.

Recommended Tire Size:

Note: Priced per wheel.

Free Mounting & Balancing: Professional mounting & balancing is available on all wheels and tires when purchased together on the same order, so you can just swap your wheels in your driveway when they arrive. We even offer Free Nitrogen tire fill (see option above).

  • FREE Mounting and Balancing in 48 hours
  • State of the Art Onsite Tire Facility
  • Scratch-Free process + Hidden Weights
  • TPMS Sensors installed free on 07+ Mustangs (see wheel page for details)
  • Free Shipping on any order to the continental 48 states
  • Please allow an extra 1 to 2 business days on your wheel and tire package for mounting and balancing

What is TPMS? The Tire pressure Monitoring System is a safety feature on all 2007+ Ford Mustangs that alerts you when your tire pressure drops to an unsafe limit.

How do I keep my TPMS feature? Aftermarket wheels don't have TPMS sensors. If you select 'Add TPMS Sensor Kit' and 'Add TPMS Tool' at the top of the page when you order your wheels, then chose Free Mounting & Balancing when you add tires, we'll install the sensors for free!

  • Save Money - we sell at a fraction of Ford's price and install for free
  • Save Safe - keep your safety feature intact
  • No warning light - lose the annoying dash light that appears if your sensors are missing

For more Information, check out TPMS Sensor Kits or TPMS Tool in detail.

Manufacturer: AmericanMuscle Wheels Style: Bullitt
Size: 18x10 Finish: Matte Black
Placement: Rear Only Centercap Size: Large (2-1/2")
Back Spacing: 7.2" (184mm) Offset: +45mm (1.8")
Bolt Pattern: 5x4.5" (5x114.3mm) Weight: 25.7 lbs
Material: Aluminum Lip Size : 2.5"
Best Tire : 275/40-18 Year/Model: 2005-2014 V6, GT, Excludes Shelby GT500

Difficulty Level:

Simple installation for anyone.

What's in the box?

  • (1) Wheel
  • (1) Center Cap
    Hardware included:
  • None Required

What's in the box?

  • (1) Wheel
  • (1) Center Cap
    Hardware included:
  • None Required
checkmark
Fitment:
  • V6 05, 06, 07, 08, 09, 10, 11, 12, 13, 14
  • GT 05, 06, 07, 08, 09, 10, 11, 12, 13, 14
  • Bullitt 08, 09
  • Boss 12, 13
checkmark
Known Exceptions:
Does not fit Brembo equipped 2011-2014 Mustang GTs, BOSS 302, Shelby GT500 or Mustangs with an upgraded a Big Brake Kit

Customer Reviews