Talk to a Mustang Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

Best Sellers

How to Install an MMD Chin Spoiler on your 2013-2014 Mustang GT, V6

Installation Time

1 hours

Tools Required
  • Alcohol Wipes
  • Adhesion Promoter
  • 7mm Socket
  • Ratchet

1


Start by removing the factory lip. **Note: supporting the front of the car with jack stands is not necessary but it can be helpful.

2


You will reuse the center hardware along with the wheel well hardware to attach the MMD Chin Spoiler.

3


Prep the bumper with alcohol wipes where the tape on the lip will contact the paint. Use the adhesion promoter on the exposed tape surface.

4


Attach the MMD chin spoiler with the factory hardware. Center the lip. Then apply firm pressure to tape surfaces. **Note: the factory splash shield mounts under the chin spoiler. If it is mounted between the chin and the bumper you will create a gap.

Best Sellers