Talk to a Mustang Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

MMD Downforce Aluminum Rear Spoiler (10-14 Mustang)

Item 393044
AmericanMuscle no longer carries the MMD Downforce Aluminum Rear Spoiler (10-14 Mustang). Please check out 1979-1993 Foxbody Mustang Spoiler & Rear Wings for an updated selection.
Verify parts fit and get product recommendations.
Mustang Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Video Review & Installation

    Hey guys, Stephanie with americanmuscle.com, here with the MMD Downforce Rear Spoiler for all 2010-2014 Mustangs. In this video, we're going to talk about a few different topics when it comes to this rear spoiler. We're gonna talk about the materials and construction, and the install as well. Of course, I'm gonna go into more detail later on here, but I can tell you right now that this rear spoiler is going to be a two-out-of-three wrenches on the difficulty meter because you will need to drill for the install. The MMD Downforce Rear Spoiler is going to be a good option for those S197 owners out there that are looking for one of the most aggressive spoilers that's available. This isn't really for someone looking to make a subtle statement. This spoiler is different and most certainly flashy, and so it's gonna be one of the most dramatic that you can currently buy. I consider this spoiler a statement piece. It isn't subtle and it is gonna make a big difference in the looks department. If it's not the tallest, then it's certainly one of the tallest spoilers that you can get your hands on at this point in time. MMD designed this spoiler to be very much race-inspired, and you can see how that comes across. This sits on top of the deck lid, and you have your supports here on the back that are gonna give it a different style around the rear of the car. So, I said that this spoiler was tall, but it's gonna sit about 4 1/2" off of your deck lid. You can see that the spoiler has this notched-out section right here, and MMD did that to give you a little bit more visibility because, like I said, this is an aggressive spoiler that's quite tall. The notched-out portion gives you a little area to view over, since you are gonna notice this thing on the back of your car in your rearview mirror. As far as material, this spoiler's a little bit different in this category as well. This is made from billet aluminum, and it's finished in satin black. Now, this is paintable if you do decide to paint it, but I will say that the black finish does help to give the spoiler more of that race-inspired styling, in my opinion. And, since it is billet aluminum, it's both lightweight and highly durable. You're gonna get everything you need to complete the install with the spoiler, including a plug for the deck lid, aluminum mounts with rubber pads, and the spoiler will come with a template that will show you where to drill. As far as price, this spoiler costs right about the $500 mark. Like I said earlier, it's made from a different material, it is an AVS, and you won't have to have it prepped and painted itself in order for it to look good, so I'm not surprised that it costs more than other spoiler options out there.So the install here is not overly difficult but, since you're looking at having to drill, it's obviously gonna be a little bit harder than installing a spoiler that just requires some brand tape. You can always have a body shop install this for you but, if you're looking doing this yourself, an extra set of hands is a good idea. When you go to drill, just use the template and take your time. Gonna call this a two-out-of-three wrenches on the difficulty meter due to the drilling, and the install will take about two hours. Your deck lid liner will need to come off for the install, as well as the factory spoiler, but that just requires a few fasteners. The third brake light comes out with a few screws, and then you mock up your new spoiler. You loosely install the spoiler with the four standard mounting points, and then align the template. You wanna tape the template down so it doesn't move, and then remove the spoiler so you can start your drilling. You only need to drill one hole. You plug the hole in the deck lid, and then you install the spoiler with the provided hardware.Wrapping things up here, the MMD Downforce Spoiler is an aggressive rear spoiler that's billet aluminum, and comes in a black satin finish. It installs using mostly the factory rear-wing bolt holes, with an added drilled hole. You can check this thing out more online for yourself and, for all things Mustang, keep it right here at americanmuscle.com.

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • Race Inspired Styling
    • Improved Downforce
    • Notched Design for Maximum Rear Visibility
    • Billet Aluminum Construction
    • Satin Black Finish
    • Bolt-On Installation
    • Fits 2010-2014 Mustangs

    Description

    Race Inspired Styling. If you love that iconic race car styling and want a taste of it for your own Mustang, add this MMD Downforce Rear Spoiler to your 2010-2014 Pony. The high quality billet aluminum construction and satin black finish bring a unique visual appeal to the rear of your S197. Once installed, this Rear Wing will sit approximately 4-1/2" off your decklid. The center notch of this Downforce Spoiler maintains maximum rear visibility for the driver, offering a styling enhancement that won't affect your safety.

    Quality Construction. Manufactured from high strength stamped billet aluminum, this MMD Downforce Rear Spoiler features CNC milled aluminum pedestal mounts complete with rubber pedestal pads. The black satin finish and stainless connection points deliver a stealthy and menacing appearance upgrade crafted to last for years to come.

    Bolt-On Installation. Complete with all the hardware necessary for the install, this Downforce Rear Wing by MMD will require some drilling. The package includes a drilling template as well as a deck lid plug, which will be used to cover the rear camera hole. With this rear spoiler installed, the factory equipped rear camera will no longer be functional.

    Application. This MMD Downforce Rear Spoiler is specifically designed for 2010-2014 Mustangs, including V6, GT, BOSS and GT500 models.

    Please note: California Special GT or GT Premium owners will find that the holes left from the factory spoiler won't not line up perfectly for installation of this MMD Downforce Spoiler.

    Modern Muscle Design

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (1) Downforce Rear Spoiler
    • (1) Decklid Plug
    • Drilling Template
    • Installation Hardware

    Tech Specs

    4.8

    Customer Reviews (75)

      Questions & Answers

      10 More Questions