WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping - Get it by Dec. 24th available on most items - Details

MMD Headlight Splitters - Pre-Painted (13-14 All)

Market Price $159.99 You Save 19% ($30.00)

$129.99

FREE Shipping
  • Item 71327

Select Year

2014 2013

Select Color

    Choose options to add to cart

    Features, Video & Details

    • Matches 2013-2014 Factory Mustang Colors
    • Painted Right Here at AmericanMuscle!
    • GT-R Inspired Styling
    • Durable Automotive Grade ABS
    • Easy Peel and Stick Install
    • Sold as a Set of Two Splitters
    • Fits All 2013-2014 Mustangs

    Review & Installation Video

    Review & Install Video

    Hey I’m Justin with AmericanMuscle.com, and I have with me MMD’s pre painted or unpainted headlight splitters, available for all 2013 and newer Mustangs. If you’re not familiar with MMD here’s what you need to know: they continue to produce a wide variety of must have interior and exterior appearance parts, that do offer both functionality and style, and if you want to learn more about MMD and what products they do offer for your 13 and 14 Mustang, just click the link below to head back to our site, and see for yourself. Ok, so in 2004, Ford released a very cool concept car called the Mustang GTR, basically this was a radically designed, road race inspired wide body S197 that featured some pretty unique styling cues, these headlight splitters being one of them. If you’ve never seen the car before, I suggest checking it out. Taking a closer look at the splitters themselves you’ll first notice a lightweight yet extremely durable automotive grade ABS plastic, so you’re not going to have to worry about them chipping or cracking. Another thing that’s immediately apparent is that these are an unpainted part, meaning you’re going to have to take them to a local paint shop or body shop to have them matched to your ride. For a few bucks more we do offer these pre painted like we have installed on our grabber blue GT behind me, that will take all the work out of having to get these painted yourself. No matter what option you choose to go with, keep in mind both options ship for free the same day as your order. I did want to point out that installing these splitters will have no impact on the total light output of your factory or aftermarket headlights. Once you receive the splitters, installing them is extremely easy thanks to the 3M tape which is included in the kit. You’ll first want to clean the headlight using the alcohol prep pads, once that’s done go ahead and prep the back of the splitter using the adhesion promoter, and then install the 3M tape carefully to the splitter. After you’ve done that, move over to the headlight and position each headlight splitter using the two LED bars on the stock headlight as your guide. Once everything is centered, go ahead and apply firmly, and that’s it. Getting both splitters installed should only take you about 30 minutes from start to finish. If you have any questions on the install of this product or any other product, go ahead and get in touch with one of our customer service reps, email them at support@AmericanMuscle.com, or give them a call at 1-855-422-7439. So if you’re looking to add some unique concept car styling to your GT or V6 then you’ll have to check out one of these headlight splitter options from MMD, available right here at AmericanMuscle.com, and if you’re looking for more killer products for your 13 and 14 Mustang, subscribe to our YouTube channel by clicking the link below or up in the corner, in the meantime that’ll do it from me, thanks for watching.

    Aggressive GT-R styling. Now you can add the bold aggressive styling of the GT-R Concept Car to your late model Mustang with a set of Modern Muscle Design Headlight Splitters. These MMD GT-R style Mustang headlight splitters not only look great, but are available pre-painted to match your Mustangs factory color straight out of the box!

    Painted Here to Match 2013-2014 Factory Mustang Colors. Modern Muscle Design Mustang Headlight Splitters are painted right here, at AmericanMuscle HQ, with the same base coat clear coat urethane paint Ford used on the exterior of your Mustang to match your stock color perfectly.

    High Quality Construction. These Modern Muscle Design Headlight Splitters are manufactured from injection molded automotive grade acrylonitrile butadiene styrene (ABS) material for its light-weight and superior durability.

    Simple Install. No messy glue or drilling is required for installation. This set of two MMD Mustang headlight splitters are designed to install simply with the supplied 3M doubled sided automotive bonding tape for a quick and easy installation.

    Application. Modern Muscle Design GT-R style pre-painted headlight splitters are designed to be a perfect fit on any 2013-2014 Mustang including the V6, GT, BOSS and Shelby GT500 models. Sold as a set of two, one driver side and one passenger side.

    Find Your Paint Code

    • Choose the year of your Mustang from the options above. The color choices displayed will be the only exterior paint colors available for your year Mustang. The first two letters for each color option are the paint code for your exterior color.

    • If you need to verify your paint code, look inside the door jam of your driver's side door at your VIN plate to find your exterior paint code.

    These headlight splitters are also available Unpainted for those who like to do-it-yourself.

    Fitment: 2013 2014 Details

    What's in the Box
    • (1) Left Headlight Splitter
    • (1) Right Headlight Splitter
    • (2) 3m Tape
    • (1) Alcohol Packs
    • (1) Adhesion Promoter
    • (1) Instructions
    Installation Info
    Will it fit my Mustang?
    • Boss 302 - 13
    • V6 - 13, 14
    • GT - 13, 14
    • GT500 - 13, 14

    Most Helpful Reviews

    5/5
    Headlight splitters

    easy installation took only 15 minutes and definitely gave the front end a more aggressive look,

    Helpful (1)

    5/5
    Perk Up The Front Of Your Pony With A Set Of Splitters!

    I hesitated buying a set of these headlight splitters as I thought they were too aggressive looking. After modding most areas of my '14 V6, though, I realized that practically nothing was upgraded on the ...

    Read More
    Helpful (1)

    Overall Rating 4.5 out of 5 stars
    Read All 51 Reviews

    Customer Photos (100+) Submit Your Photo

    View All 100+ Photos

    You Might Also Like

    7 Questions / 14 Answers

    Ask a Question

    Headlight Splitter impact on light I drive a lot at night, will this splitter effect the light output from the headlights.

    shiazv

    • Not enough to be bothersome. The splitter is close enough to the light source that the light is projected across and under it. I did not notice any loss of light from them and they look great on the car. hope that helps you out.

      SurgicalShark

      Good Answer (9) (1)

    Show 3 more answers Question Resolved

    Car wash safe? I sometimes do not have the time to hand wash my car. So I visit my local drive thru car wash. Should there be concern about these splitters coming off?

    Dennasty22

    • I haven't tried mine in a car wash, but I did remove one. When I installed it, I mistakenly mounted it on an angle. I had followed the instructions to the letter, so removing it was extremely difficult. I don't think you'll have any problem, just make sure you follow the directions. It comes with an adhesion promoter which works very well at keeping the double sided tape stuck to the surface.

      Jim10x

      Good Answer (1) (0)

    Show 3 more answers Question Resolved

    Headlight cover Will this fit over the black headlight covers? I have them on right now and I think it would look mean if I kept them black and added this splitter!

    Deepimpactdj

    • you can apply them over the covers but they will stick better on the bare headlight surface,

      sonny13

      Good Answer (1) (0)

    Show 1 more answer Answer This Question I need this answered (0) (0)

    I ordered these approximately two years ago and I had to have my bumper removed and repainted, in which the splitters needed to be temporarily removed. Afterwards, the tape has managed to adhere the splitters to my headlights, but it is beginning to finally give out. I've tried using some generic car-grade double-sided tape to fix the problem, but alas did not solve the problem; is there a way to (just) get the precut tape kit again?

    Chadd

    • We sincerely apologize for the inconvenience. Unfortunately, we do not have the tape separately or the MMD Headlight Splitters, however, 3M double-sided automotive tape is what we personally use. The tape should be applied in dry, warm weather for at least 48 hours for proper adhesion. If the conditions are wet or slightly humid, and/or under 70 degrees in temperature, the tape is bound to fail.

      AMJEFF

      Good Answer (0) (0)

    Question Resolved

    Just read the direction for install of the headlight splitters...one question? Do you apply the adhesion promoter to the headlight lens along with the splitters. Just want to check before jumping in.

    Durb

    • It is suggested to apply the adhesive promoter on both the headlight and the splitter.

      AshleyK

      Good Answer (0) (0)

    Question Resolved

    COMPATIBLE WITH MMD BLACKOUT GRILL SURROUND? Will these fit with the MMD Blackout Grille Surround?

    2013Vertible

    • Yes, it will fit!

      Reaper65oh

      Good Answer (0) (0)

    Show 1 more answer Answer This Question I need this answered (0) (0)

    More Products You Might Like

    Customer Reviews (51) Write a Review

    Overall Rating 4.5

    out of 5 stars

    Installation Time:Less than 1 Hour

    • Fit 4.020833 4.0
    • Appearance 4.895833 4.9
    • Bang For Your Buck 4.270833 4.3



    • 5/5

      January 11, 2016

      Headlight splitters

      easy installation took only 15 minutes and definitely gave the front end a more aggressive look,

      bgp

      Ramona ca

      Helpful (1) (0)

    • 5/5

      Installation Time: Less than 1 Hour

      December 15, 2015

      Perk Up The Front Of Your Pony With A Set Of Splitters!

      I hesitated buying a set of these headlight splitters as I thought they were too aggressive looking. After modding most areas of my '14 V6, though, I realized that practically nothing was upgraded on the front of my pony, and that was usually the first area of my Mustang that others looked at at car shows, so I ordered a set, and I'm glad I did! The first pair I received had too much paint or clear coat on the top of the left splitter, so I sent them back. The replacements came back in no time at all. These pre-painted parts from AM are incredibly well packaged (I have the outside mirror covers, too). These parts are very well made and the instructions are clear and easy. These parts are held on with two-sided tape that also uses a coating of 3M Adhesion Promoter. The two-sided tape and adhesion promoter will no doubt keep these splitters on well into eternity! The two-sided tape is perfectly cut and fits the splitters spot on. Be sure to test fit the pieces and use either masking tape or erasable marker for guidelines as you only get one shot at adding these! I made sure that as I added these that I hovered the piece over the headlight and nose and tried to land it in the center corner first and then worked out to the outer edges. This is the opposite of what the instructions say, but it worked out fine. Overall I was greatly pleased with the final result. These splitters balance the front of the car and improve its looks, but they really are not overly aggressive. They compliment the lower bumper splitters and look appropriate. A bit pricey, but they are well made and the paint match was quite good. Recommended!

      RickMitchell

      Year: 2014 Submodel: V6 Baltimore

      Helpful (1) (0)

    • 5/5

      Installation Time: Less than 1 Hour

      September 19, 2013

      looks great

      These headlight splitters look great and were easy to install the paint match up was perfect a must have item it really makes the front end of your stang stand out from the crowd.

      sonny13

      Year: 2013 Submodel: V6 Tyaskin, MD 21865, USA

      Helpful (7) (0)

    • 5/5

      Installation Time: Less than 1 Hour

      February 27, 2014

      Splitter Awesomeness

      I got these in the Mail 3 day after I ordered them, took 2 months to get the balls to put them on... So u have to put the sticky tape on them, not really hard, but the fitting is kinda weird. I recommend Practicing A lot after you install the tape to the Splitters, so u know where your going to put it. I lined the headlight with blue tape on one of my practice runs so I knew where to put it exactly... Turned out great, followed the line of blue tape, very light hands and it Looks Amazing!!! Color matched Perfect!!!

      Beerz

      Year: 2013 Submodel: GT

      Helpful (5) (0)

    • 5/5

      Installation Time: Less than 1 Hour

      May 10, 2013

      Easy install which has major curbside appeal

      Shipping was very quick. Install was a breeze, lined up and matched perfectly. No paint imperfections, also matched perfectly. For such a minor exterior mod it has drawn a lot of comments. People ask if it is a factory option. Very satisfied and recommend if you are going to add other exterior mods, to further enhance your ride's uniqueness.

      Bel23

      Year: 2013 Submodel: GT Fort Campbell, KY, USA

      Helpful (5) (0)

    • 5/5

      Installation Time: Less than 1 Hour

      March 06, 2014

      Subtle but sharp look

      Gives my pony a great front on look, that's "different" in a good way - though people don't always know why. Very pleased. Easy to instal, nice finish touch

      ponyxpress

      Year: 2013 Submodel: GT central USA

      Helpful (4) (0)

    • 4/5

      Installation Time: Less than 1 Hour

      February 18, 2014

      Nice Sporty Touch

      A nice sporty touch, but not a "over the top" look. The color matches perfectly. Easy to install. The price is right for what you get. They are a quality product. After getting them installed, they look great and seem to be a solid install. These should not come off until you take them off. As for the install, just use the small square boxes that on the headlight lens and the small round headlight alignment dot, to align them. I would definitely purchase again and recommend this product.

      SamC

      Year: 2013 Submodel: V6 Concord, NC, USA

      Helpful (4) (0)

    • 5/5

      Installation Time: Less than 1 Hour

      December 10, 2013

      Aggressive front end

      My biggest concern was the possibility the splitters would effect the projection of the headlights but no. I still have people flashing me at night because they think my high beams are on. Common for the 13 and 14 Mustang. The splitters look incredible and have added to the my car's ever evolving uniqueness. My best buddy who owned a '05 Shelby is impressed. Simply said, they change the character of the front end and make it look almost mean.

      Nicksmoak

      Year: 2013 Submodel: V6 Cedar Grove, NJ, USA

      Helpful (3) (0)

    • 5/5

      Installation Time: Less than 1 Hour

      November 12, 2013

      A definate must have

      This is one of my favorite add on's I get the most compliments out of them, it definitely adds an aggressive look. This is the one item I would not have a Mustang without

      JoshTig

      Year: 2013 Submodel: GT Bristol,VA

      Helpful (3) (0)

    • 5/5

      Installation Time: Less than 1 Hour

      September 16, 2013

      Give a great look

      I was not sure how these would look when I ordered them but after putting them on I could not be more pleased. It is a huge part of the overall look of my mustang. The paint matched perfectly for Deep Impact Blue. Thanks AM, another great product. As always shipping was FAST. I had these in two days from when I ordered.

      LVBlack

      Year: 2013 Submodel: GT Woodstock, GA

      Helpful (3) (0)

    • 5/5

      Installation Time: Less than 1 Hour

      September 05, 2013

      The Mean Glare You Want to give, without even looking at them.

      With the new look of the mustang the Split headlights looks vicious, pre painted and amazing you can beat the install easiness and great look you get immediately

      Jusitn57

      Year: 2014 Submodel: GT Pa

      Helpful (3) (0)

    • 4/5

      Installation Time: Less than 1 Hour

      May 20, 2014

      Adds character, but.....

      This is an awesome addition to the front end of the Mustang. It really gives you an aggressive/mean look. You will stand out in a crowd - for sure. But..... one of the headlight splitters started coming off of the side of the body. The headlight portion is sticking tightly. I don't know if the front of my Mustang is a little unusual or if I got a splitter that wasn't cut exactly perfect. It has only separated by about 3/16" of an inch. No one else would likely notice, but I sure do. I followed the directions to a "T". And really took my time lining these up and installing. They look really nice, but be careful getting them to fit 100% perfectly.

      CYNARA

      Year: 2014 Submodel: GT

      Helpful (2) (0)

    • 2/5

      November 07, 2014

      Disappointed

      Thoroughly disappointed. I was so excited to add these to my Mustang and when they came, I immediately ran out to fit them to see how they looked. Horrible fit. Left side fit better then the right but all together, they really didn't fit at all. MAJOR gaps. Now I'm left with the task of sending them back... I gave 5 stars for the appearance only because they would have looked great.

      SheenaB

      Year: 2014 Submodel: V6

      Helpful (1) (0)

    • 2/5

      Installation Time: Less than 1 Hour

      August 07, 2014

      Splitters

      I bought a set of these in Black and one side will not line up or fit tight there is too much gap as if you need to double tape it to fit firm or go short on one side so I did not install them I think they would look great but something is off on one of my pieces again I know its a great product but I got a defective one so they are just sitting on shelf now.

      paradone

      Year: 2014 Submodel: GT

      Helpful (1) (0)

    • 5/5

      Installation Time: Less than 1 Hour

      July 18, 2014

      Review from MMD Headlight Splitters - Unpainted (13-14 All)

      Happy Stang

      You would not expect a simple piece of plastic to make such a dramatic difference in the appearance of the front end, yet it did. Customer support is among the best I have dealt with . All statements online are true and the install easy. Beautiful outcome.

      Alloverit

      Year: 2014 Submodel: V6 Mcclure, pa, 17841

      Helpful (1) (0)

    • 5/5

      Installation Time: Less than 1 Hour

      April 01, 2014

      Awesome color match but....

      In the State of Hawaii, we cannot install these headlight splitters or else we will not pass the Safety Check that is a law here in Hawaii to get your vehicle registered yearly and the vehicle stickers that are put onto your license plates and the other safety check sticker on your rear end fender. The State law says that this product blocks the lights of the headlights; however, I really don't think it does. I agree with other reviews that say it helps to calm down the brightness. Will save these splitters for the future in case my Stang gets shipped out of this state to my son in the future on the mainland. The Candy Apple Red was/is awesome prepaint and I recommend it to those who can use it on their cars.

      MuscleCarWoman

      Year: 2013 Submodel: GT Island of Hawai‘i, Hawaii, USA

      Helpful (1) (0)

    • 5/5

      Installation Time: Less than 1 Hour

      March 24, 2014

      looks great

      splitters look great. Paint was perfect match and flawless. Be sure to dry fit them before applying the tape, once it is "stuck" down it is there to stay.

      gerry66

      Year: 2013 Submodel: V6 Akron, IA 51001, USA

      Helpful (1) (0)

    • 5/5

      Installation Time: Less than 1 Hour

      January 09, 2014

      LOOKS GREAT!

      10 MINUTES TO INSTALL WITH THAT GREAT CUSTOM LOOK.

      HangmanRacing

      Year: 2014 Submodel: GT Virginia Beach , Virginia

      Helpful (1) (0)

    • 4/5

      Installation Time: Less than 1 Hour

      June 13, 2013

      Awesome Look!

      I love the look that these splitters give my mustang! They were extremely easy to install, but some care is needed to assure symmetry from left to right side. My only issue was with the color matching, but I thoroughly understand the difficulty of matching "candy" type colors. They were very close but the tint of the "Ruby Red" was slightly off. Once mounted on the headlights it is very difficult to notice.

      Jim10x

      Year: 2014 Submodel: V6 Toms River, NJ, USA

      Helpful (1) (0)

    • 3/5

      Installation Time: Less than 1 Hour

      January 09, 2014

      Good product, bad fitment and design

      The paint and style of these splitters is excellent. The install was quick and easy. The fitment isn't very good, the front has already started to separate from the body. The design is poor because if you want to replace the grille, headlights or fog lights or pull the bumper off for any reason, these parts will have to be ripped off and reapplied. These attach directly to the grille surround and headlight lens. That said, they look great from 10ft away and really compliment the body lines. I would have no issues recommending these, but if a new grille or tinted headlights are on your list, buy and install those first to avoid headaches.

      KSconvert

      Year: 2014 Submodel: GT Wichita, KS

      Helpful (1) (3)

    Related Mustang Categories