Talk to a Mustang Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

Best Sellers

How to Install MP Concepts GT350 Style Fender Scoops - Unpainted on your Mustang

Installation Time

30 minutes

American Muscle
Shop Parts in this Guide

Wash the fenders with soap and water. Allow the panel to dry. **Recommended: Wipe the panel down with isopropyl alcohol to ensure the cleanest surface possible.


Prepare the fender vent by first installing the Fender Vent insert. Test fit the insert on the vent. Remove the insert and apply the supplied 3M double sided tape.


Test fit the insert again, ensure sure the end sit flush with the vent otherwise, the vent will not fit correctly on the car.


Remove the tape backing from the insert, install the insert onto the vent.


Install the 3M tape on the Fender vent as seen above. Before removing the tape backing, make yourself familiar with the way the vent fits on the vehicle.


Peel off the double sided tape backing and apply the vent to the vehicle. Apply firm even pressure to ensure proper adhesion.


Best Sellers