Free Horsepower: Win a C&L Cold Air Intake & Bama Performance Tuner Enter to Win
1-888-332-7930 M-F 9-9 EST, Sat 9-5:30 EST

Free Shipping on Everything. Seriously. Details

MMD Headlight Splitters - Unpainted (10-12 V6)

AmericanMuscle no longer carries the MMD Headlight Splitters - Unpainted (10-12 V6). Please check out 2010-2014 Mustang Body Kits for an updated selection.
9 Reviews
Our Price

$99.99

  • Item #41229-00
  • Market Price $109.99
  • You Save 9% ($10.00)
Free Shipping on Everything

AmericanMuscle no longer carries the MMD Headlight Splitters - Unpainted (10-12 V6). Please check out 2010-2014 Mustang Body Kits for an updated selection.

Product Videos
Features
  • Aggressive GT-R styling
  • Durable automotive grade ABS
  • Unpainted
  • Sold as a set of two splitters
  • Fits 2010 to 2012 V6 Mustangs
Description
Painted Mustang Headlight Splitters Aggressive GT-R styling. Add the aggressive good looks of the GT-R Concept Racecar Mustang to your very own V6 Pony with a set of MMD headlight splitters. These Mustang headlight splitters come unpainted so you can customize them however you like - they are also available pre-painted in factory colors.

Durable Material. Constructed of a durable injection molded ABS plastic, these Modern Muscle Design Mustang headlight splitters will last a lifetime.

Simple Install. No messy glue or drilling is required for installation. This set of two MMD Mustang headlight splitters are designed to install simply with the supplied 3M doubled sided automotive bonding tape for a quick and easy installation.

Application. These GT-R style MMD Mustang headlight splitters are designed to be a perfect fit on any 2010 to 2012 or newer V6 Mustang and are sold as a set of two, one driver side and one passenger side. Does

not fit GT or Shelby GT500.

Mustang Fitment: 2010 2011 2012 Details

What's in the Box
  • (1) Left Headlight Splitter
  • (1) Right Headlight Splitter
  • (2) 3m Tape
  • (1) Alcohol Packs
  • (1) Adhesion Promoter
  • (1) American Muscle Instructions
    Hardware included:
  • None Required
Installation Info
Fitment
  • V6 - 10, 11, 12

Most Helpful Reviews View All

Overall Rating 4.2/5 Write a Review
3/5
New aggresive look

I installed these the other day, the paint was spot on from AM. It gives the '11 V6 a great aggressive new look. THE BIGGEST PROBLEM THAT I HAD WAS the damn 3M tape DOES NOT HOLD WORTH CRAP, even when

Read More
Helpful (5) (0)

3/5

Top 1000 Contributor

Awesome look, horrible to install.

First let me say, this is by far my favorite dress-up mod for the car. They give the car a fantastic sleek look that really catches your eye. I took my time and followed the instructions exactly. There

Read More
Helpful (3) (0)

Videos

Customer Photos

You Might Also Like

Q & A (1 Questions, 0 Answers) Ask a Question

Will these work with the smoked headlight covers? i was wondering if these will fit the smoked headlight covers

robbydiesel Year: 2012 Model: V6

Be the First to Answer This Question
Good Question (0) (0)

Reviews (9) Write a Review

  • 5 Stars .44 45%
  • 4 Stars .33 33%
  • 3 Stars .22 22%
  • 2 Stars 0 0%
  • 1 Stars 0 0%
4.2

out of 5 stars

8 Customers Recommend this Product

Installation Time:Afternoon

Installation Cost:0-$100

  • Color Match: 5 5/5
  • Fit & Finish: 2 2/5
  • Appearance: 5 5/5
  • Bang For Your Buck: 4.571429 4.6/5
Filter By Sort By
  • 3/5

    New aggresive look

    July 09, 2011

    Review from MMD Headlight Splitters - Pre-painted (10-12 V6)

    I installed these the other day, the paint was spot on from AM. It gives the '11 V6 a great aggressive new look. THE BIGGEST PROBLEM THAT I HAD WAS the damn 3M tape DOES NOT HOLD WORTH CRAP, even when you use the 3M adhesive promoter that AM gives you. You have to make sure you use enough adhesive promoter bc if you don't they will fall off the tape. I'm actually taking them to a body shop next week to get them professionally installed with a different type of permanent adhesive. I suggest you take any parts that require 3M auto tape to a trusted body shop so they can use something better than that 3M crap.

    Steve

    Year: 2011 Model: V6 Driving Style: Daily Driver

    Helpful (5) (0)

  • 3/5

    Awesome look, horrible to install.

    June 10, 2012

    Review from MMD Headlight Splitters - Pre-painted (10-12 V6)

    First let me say, this is by far my favorite dress-up mod for the car. They give the car a fantastic sleek look that really catches your eye. I took my time and followed the instructions exactly. There were no alcohol pads included with them as the instructions called for, but thankfully I had some already. They looked great right after I put them on, but within ten minutes, the ends were peeling up. No matter how much pressure I applied they would not stay down. I took them to a body shop and they removed all the tape that came on them, cleaned both surfaces thoroughly, applied adhesion promoter and professional grade tape, and installed them again. Once again within a few minutes the ends came up again. I am going to follow another reviewer's (and the body shop owner's) advice and sand the back of them so they sit flat against the headlight without pushing on them, then put the tape on and install them. It's going to be a very time consuming project, but I'm sure the end result will be well worth it. I just wish that they had fit better right out of the box.

    Shadow16508

    Year: 2012 Model: V6 Driving Style: Daily Driver 'Stangs I have owned: 1 Erie, PA, USA

    Helpful (3) (0)

  • 4/5

    I Like them !

    March 15, 2012

    Review from MMD Headlight Splitters - Pre-painted (10-12 V6)

    As stated in another review, the paint match and finish was right on. A few words of caution: Because of the fit and finish of your headlight lens and the new splitters, they may not sit flat and flush against each other. If not, you will need to trim the splitters being careful not to chip or scratch the paint of the splitters ( I used a small sanding block). If they do not sit flat against the headlight lens the ends will not hold with the 3M tape and glue promoter. Take your time and I think you will be happy, I was.

    Wingnut

    Year: 2010 Model: V6 Driving Style: Daily Driver Orlando, Florida

    Helpful (2) (0)

  • 5/5

    Headlight Splitters-Pre-painted

    August 15, 2011

    Review from MMD Headlight Splitters - Pre-painted (10-12 V6)

    I Liked them when they came in through the mail and the Instructions seemed a lot more easier than what it really was so, I am going to have to take them to a body shop to have them put on.

    Kristie Nuckols

    Year: 2011 Model: GT Driving Style: Daily Driver

    Helpful (2) (0)

  • 5/5

    look nice but bad tape and not curved like the headlight

    February 23, 2013

    Review from MMD Headlight Splitters - Pre-painted (10-12 V6)

    looks great on your stang only problem is the tape they use is cheap and comes off and the splitters are not curved like the lights i had to sand and heat them to contour the light appropriately but they do look awsome once installed

    grabber301

    Year: 2011 Model: V6 Driving Style: Show 'Stangs I have owned: 1 nj

    Helpful (1) (0)

  • 4/5

    Looks Great, but Adhesive is Very Poor

    July 30, 2012

    Review from MMD Headlight Splitters - Pre-painted (10-12 V6)

    As mentioned in the other ratings the adhesive does not work well with the way the splitters are curved. The tape is not strong enough to hold the part flush. I still need to take to a body shop or get a stronger adhesive but they do look nice while they temporarily stick.

    ShaneD

    Year: 2012 Model: V6

    Helpful (1) (0)

  • 4/5

    Awesome look, horrible fitting

    July 03, 2012

    Review from MMD Headlight Splitters - Pre-painted (10-12 V6)

    These look awesome on my car just they do not fit right at all on the headlight. I tried doing them myself and the end just kept sticking off since it is not fitted correctly for the mustang headlights. I took em to a shop when I got some other body work done and they put some more permanent applications on it and they look awesome but again these will not go on with the 3m tape and adhesive that AM sends you.

    Rscary

    Year: 2010 Model: V6 Driving Style: Daily Driver 'Stangs I have owned: 2

    Helpful (1) (0)

  • 5/5

    Bad glue

    June 05, 2012

    Review from MMD Headlight Splitters - Pre-painted (10-12 V6)

    The product looks great but they need better glue. The do not fit right for my 2010 and the glue kept coming off. I had to use some crazy glue in a few areas and the job was done.

    Salomon529

    Year: 2010 Model: V6 Driving Style: Daily Driver 'Stangs I have owned: 2 Louisiana

    Helpful (1) (0)

  • 5/5

    Luv 'em

    September 25, 2013

    Review from MMD Headlight Splitters - Pre-painted (10-12 V6)

    Splitters went right on, 10 minutes. I've gotten many compliments on how they change the appearance.

    V6Jim

    Year: 2012 Model: V6 Driving Style: Daily Driver 'Stangs I have owned: 3 San Marcos, Ca.

    Helpful (0) (0)

More Products You Might Like