WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping on Everything. Seriously. Details

NTK Performance Oxygen Sensor - Front (11-14 V6)

Market Price $118.99 You Save 12% ($14.00)

$104.99 (each)

FREE Shipping
  • Item 64076
  • MPN# 24387

In Stock Ships same business day. Choose options to add to cart

Features & Details

  • Regain Lost Power
  • Direct OEM Style Replacement
  • Plug and Play to Factory Harness
  • Front (Upstream) O2 Sensor
  • Sold Individually
  • Fits 2011-2014 V6 Mustangs
Regain Lost Power. A bad oxygen (aka O2) sensor can cause poor performance, lousy fuel economy, the dreaded check engine light, and even cause you to fail emissions testing. So replace those worn out sensors with brand new NTK sensors for superior, consistent performance.

Exceeds OEM Quality. Designed with a waterproof factory-fitted connector to ensure a perfect fit every time, NTK's oxygen sensors meet or exceed OE specifications and are built with the highest quality materials and craftsmanship to ensure a superior quality direct replacement for your worn or failed OEM sensors.

Application. This NTK Performance Oxygen Sensor is designed to be a direct performance replacement for the Mustang. please see the NTK Performance Oxygen Sensor - Front (upstream) applications below:
  • 2011 to 2014 V6 Mustangs

Fitment: 2011 2012 2013 2014 Details

What's in the Box
  • (1) Front Oxygen Sensor
Installation Info
Will it fit my Mustang?
  • V6 - 11, 12, 13, 14

Most Helpful Reviews

5/5
excellent replacement

Before this o2 sensor I could feel the car very lean and it was wasting lots of gas. After installation car feels like new and it is back to its great mileage, great product.

Helpful (1)

5/5
solved o2 problem

worked great, haven't gotten check engine light since installing them. half the cost ford wanted to charge me.

Helpful (3)

Overall Rating 4.8 out of 5 stars
Read All 20 Reviews

Customer Photos

You Might Also Like

3 Questions / 7 Answers

Ask a Question

Any use installing on a 2013? Would I get better fuel economy if I switch to these sensors from stock? Also, I saw that some ppl are upgrading the sensors when they get aftermarket exhaust systems. Is this necessary?

mrj567

  • If your car had low mileage on it, it's unlikely you'll notice a difference, however running high flow cats on my o12' the sensors were already going bad at 50k mileage, which is why I opted to pay the holiday sale price of $100 per sensor, rather then pay $180 at local parts store for motor craft. My check engine light used to flicker, not it's off. I do allot of city driving so it's hard to tell mileage improvements but I'd say I go about 20 more miles on a tank. City driving only.

    mrlight

    Good Answer (1) (0)

Show 2 more answers Question Resolved

Is there any splicing of wires involved? The description says 'Plug and Play' as well as 'Designed with a waterproof factory-fitted connector to ensure a perfect fit every time'.

KingGeorge

  • The installation for the NTK Performance Oxygen Sensor is as simple as unplugging the factory sensor and plugging in this new sensor. Absolutely no splicing or cutting needed.

    SalC7

    Good Answer (1) (0)

Show 1 more answer Question Resolved

Fitment I was wondering would this O2 sensor fit an aftermarket exhaust with an extension? How would it hold up to the aftermarket air flow?

JoeKim

  • This works perfect with both OEM and aftermarket installations. They hold up perfectly to increased airflow and are a breeze to install...the hard part is getting your old o2 sensors out.

    TheBigHerm

    Good Answer (1) (0)

Show 1 more answer Answer This Question I need this answered (0) (0)

More Products You Might Like

Customer Reviews (20) Write a Review

Overall Rating 4.8

out of 5 stars




  • 5/5

    May 23, 2014

    excellent replacement

    Before this o2 sensor I could feel the car very lean and it was wasting lots of gas. After installation car feels like new and it is back to its great mileage, great product.

    danielc49102

    Year: 2013 Submodel: V6 Texas, USA

    Helpful (1) (0)

  • 5/5

    December 11, 2012

    solved o2 problem

    worked great, haven't gotten check engine light since installing them. half the cost ford wanted to charge me.

    gwhiz

    Year: 2011 Submodel: V6 Evansville, IN, USA

    Helpful (3) (0)

  • 5/5

    April 07, 2016

    Great Product!

    Product was great! Was shipped immediately and took care of my check engine light! Easy installation took me less than 5 minutes to install it and fits perfectly! As well as a great price! Thank you American Muscle!

    marioahdz

    Year: 2014 Submodel: V6

    Helpful (1) (0)

  • 5/5

    December 23, 2014

    As good as it gets!

    This product is great! Have had no problems with them since install. I was having heavy misfiring and throwing codes all the times. Ever since Installed these sensors I have had 0 issues. Might be a bit expensive but will keep your car running as it should !

    Davidcast

    Year: 2014 Submodel: V6 Naples fl

    Helpful (1) (0)

  • 5/5

    December 23, 2014

    Needed This

    Needed two of these because of my headers and they haven't gone out since thank you for them

    MikeJennings15

    Year: 2011 Submodel: V6 Tulsa, OK, USA

    Helpful (1) (0)

  • 5/5

    December 19, 2014

    does what it's supposed to

    For about $80 less per sensor over stock own, they do just fine.

    mrlight

    Year: 2012 Submodel: V6 texas

    Helpful (1) (0)

  • 5/5

    August 22, 2014

    O2 sensor replacement

    I had installed LT headers and a Catted x from bbk but my oem sensor could not read to new set up, in which was making my car run lean. I replaced my drivers side sensor and fixed the problem. This ntk is much cheaper than ford oem install was easy!

    Stangtho

    Year: 2012 Submodel: V6 New York

    Helpful (1) (0)

  • 5/5

    October 21, 2014

    Best price available!!

    One of my O2 sensor went bad on my 2011 mustang. Not usually an expensive ordeal other than the fact local parts stores do not stock nor seem to have accessibility to newer model parts. After much shopping online, American muscle has the lowest price available. Even lower than the sketchy ones on ebay that illogically fit every year, make, and model, yet claim it has easy installation but don't mention a welding torch or hammer. Very easy to repair. American muscle even recommended swapping O2 sensors from left to right and seeing if the code shows.

    HughJaynus

    Year: 2011 Submodel: V6 Summerville, SC, USA

    Helpful (0) (1)

  • 5/5

    August 22, 2014

    Great product

    Reliable and fixed all my problem! Easy installation and long lasting!

    AuroraStang

    Year: 2013 Submodel: V6 Arkansas

    Helpful (0) (1)

  • 5/5

    November 23, 2013

    Works as to be expected

    Fouled out 1 of my o2 sensors when changing to a bbk hi flo x pipe. After searching all different auto part stores am.com had the best price and even 1 day delivery was only $8!!! Installed and no more CEL.

    RaceRedCyclone

    Year: 2011 Submodel: V6

    Helpful (0) (1)

  • 5/5

    April 19, 2013

    Works perfect

    Easy install and works great! I recommend this product anytime!

    Voss90

    Year: 2011 Submodel: V6 Panama City

    Helpful (0) (1)

  • 5/5

    November 22, 2016

    Amazing

    Bought these along with the extensions since my car was throwing many o2 sensor engine codes. Not only did these get rid of all those codes it increased my gas mileage and it is a very quick and easy install. Took 30 minutes with a jack and stands

    Haineslyfe

    Year: 2014 Submodel: V6

    Helpful (0) (0)

  • 5/5

    August 25, 2016

    02 sensors

    Works great if you got long tube headers make sure you use dieelectric grease cause water will hit the o2 sensors cause they are so low and cause them to short.

    Chad

    Year: 2014 Submodel: V6

    Helpful (0) (0)

  • 4/5

    August 08, 2016

    Front O2 Sensor

    Product works well it helped get rid of the check engine light for the bank 1 sensor 1 issue but unfortunately the code reader didn't pick up any issue for bank 2 sensor 1 until after I fixed the only one showing a problem so I'll have to replace that sensor now. The product itself operates well and helped fix my initial issue

    Dunstan

    Year: 2014 Submodel: V6

    Helpful (0) (0)

  • 5/5

    July 28, 2016

    Ntk

    Affordable andand efficient!! Arrived in 3 days andand CEL is gone car's running a lot better andand gas mileage has increased thank you NTK and Am!!

    Silver

    Year: 2014 Submodel: V6

    Helpful (0) (0)

  • 5/5

    May 31, 2016

    Killed the Rough idle issue

    My girlfriend has a 2013 V6 but was having issues in her acceleration, and idling... I have a '14 GT and had a X4 tuner... pulled the codes on her car and it said O2 sensor may be faulty... Inquired at a store for the price of 1 Upstream O2 sensor.... 160.49... Looked here on American Muscle... 104.99! It was a no brainer... replaced both sensors...NTK is a great product, quick shipping as always. Thanks AM!

    Rich

    Year: 2014 Submodel: GT

    Helpful (0) (0)

  • 5/5

    February 26, 2016

    fix for long tube headers

    Installed long tube headers on my pony and got that ugly dreaded check engine light which of course was from my horrible stock o2 sensor. Installed a set of these NTK sensors no more check engine light:)

    robslife

    Year: 2014 Submodel: V6

    Helpful (0) (0)

  • 2/5

    February 24, 2016

    didnt work

    has not worked for me check engine light is still on. mods i have bbk throttle, longtube headers, offroad x pipe , borla atak catback, v6 and i keep getting a trouble code of heated oxygen sensor and its throwing my car off

    hagop22

    Year: 2012 Submodel: V6

    Helpful (0) (0)

  • 5/5

    February 18, 2016

    Mustang

    Yeah this oxygen sensor work great It give my car more horse power and fuel economy, I recommend this to everyone who has a mustang v6

    Power

    Year: 2013 Submodel: V6 Big lake tx

    Helpful (0) (0)

  • 5/5

    September 12, 2014

    Great buy!

    Theses sensors work great! Installed bbk long tubes, and my oem sensors shorted out upon removal. I was upset when usps lost my shipment but AM was on top of it and sent out another package immediately! Love the sensors but there customer service is out standing !! Thanks AM!!

    Bama6

    Year: 2014 Submodel: V6 Houston, TX, USA

    Helpful (0) (0)

Related Mustang Categories