Mustang Parts › 05-09 Mustang Parts Installation Instructions › How to Install Pre-Painted Center Console Trim on you 2005-2009 Mustang
Share

How to Install Pre-Painted Center Console Trim on you 2005-2009 Mustang

This Mustang Parts Installation Guide Works For

Center Console Trim Kit - Pre-painted (05-09 All)Center Console Trim Kit - Pre-painted (05-09 All)
Fitment Includes:
  • - V6 2005, 2006, 2007, 2008, 2009
  • - GT 2005, 2006, 2007, 2008, 2009
  • - GT500 2007, 2008, 2009
  • - Bullitt 2008, 2009
DOWNLOAD PDF

Tools Required

Installation Time: 45 Minutes

Installation

Step 1 Pull the center console up to release the retaining clips.

center-console-trim-kit-pre-painted-05-09-all

Step 2 Once the center console is pulled upwards, grab the console trim from the lower rear section and pull forward to release the retaining clips. Remove the trim from the vehicle.

center-console-trim-kit-pre-painted-05-09-all

Step 3 Once the factory trim is removed, install the painted trim by aligning the retaining clips with the factory holes and pressing down to fully seat them.

center-console-trim-kit-pre-painted-05-09-all

Step 4 Repeat Steps 2-3 for the opposite side trim. Once both painted console trim pieces are installed and fully seated, press down on the console to re-seat the retaining clips. This completes the installation of your Painted Console Trim from American Muscle.

center-console-trim-kit-pre-painted-05-09-all