Free Horsepower: Win a C&L Cold Air Intake & Bama Performance Tuner Enter to Win
1-888-332-7930 M-F 9-9 EST, Sat 9-5:30 EST

Free Shipping on Everything. Seriously. Details

Pypes Polished Shorty Headers (94-95 GT)

1 Reviews
Our Price

$264.99

  • Item #20031
  • MPN #HDR52S
  • Market Price $294.99
  • You Save 10% ($30.00)
Out of Stock Notify Me
Free Shipping on Everything
Features
  • Increases horsepower and torque
  • Free flowing Mandrel-bent tubing
  • 304 polished stainless construction
  • Bright polished finish
  • Fits 1994-1995 5.0L GT Mustangs
Description
Free Up Horsepower and Torque. Replace those heavy and restrictive cast iron factory exhaust manifolds with a set of Pypes free flowing, lightweight, stainless steel shorty headers that will allow your 5.0 to breath better than stock for more power. Durable Construction. Manufactured from 1-5/8" mandrel bent 304 stainless steel tubing for strength and improved airflow, these Pypes Shorty Mustang Exhaust headers feature a one piece 3/8" thick header flange for additional strength and an OEM fit. Pypes headers are then polished to a bright finish for impressive under hood styling.

Application. Designed as a direct bolt on, these Pypes Shorty Headers will bolt straight up in the stock location to the factory Mid-Pipe without any modifications on the 1994 to 1995 5.0L GT Mustangs to improve exhaust flow and sound.

Technical Note: Check local ordinances to ensure that this Pypes product is legal for use in your state.

Mustang Fitment: 1994 1995 Details

What's in the Box
Hardware included:
  • (2) gaskets
  • (1) Hardware kit
Installation Info
Tech Specs
Header Specifications
Header Type: Short Tube Finish : 304 Polished Stainless
Type Mid Pipe Required: Standard Fitment: 1994-1995 5.0 V8 Mustangs
Fitment
  • Cobra - 94, 95
  • GT - 94, 95

Customer Photos

You Might Also Like

Q & A (2 Questions, 1 Answers) Ask a Question

Fitment Will these work with gt40p heads?

Fordcntry09 Year: 1994 Model: GT

Question Resolved
Good Question (0) (0)
  • No unfortunately, these headers will not fit the GT40 heads.

    Helpful (0) (0)

    LisaS Year: 1992 Model: GT

will these headers fit the gt40p heads?

luissn95 Year: 1995 Model: GT

Be the First to Answer This Question
Good Question (0) (0)

Reviews (1) Write a Review

  • 5 Stars 0 0%
  • 4 Stars 1.0 100%
  • 3 Stars 0 0%
  • 2 Stars 0 0%
  • 1 Stars 0 0%
4.0

out of 5 stars

1 Customer Recommends this Product

Filter By Sort By
  • 4/5

    pypes headers

    May 20, 2011

    well i purchased a set of pypes headers cause i have a pypes cat back on the car i got for a great deal used and wanted the stainless steel advantage as well with the point of having a matching part on my car. My girlfriend has an 06 gt with the complete pypes setup on it as well and we are happy with how it does not rust! on another hand the install on this product was horrible!! the kit came with 16 bolts for the head and 4 not studs but bolts that go thru the collector and hit the primary making it hard to get everything tight. the bends on the primary tubes were so sharp that it made it incredibly hard to tighten the bolts all the way. Back to the 16 bolts supplied for the head.... there were 4 bolts that did not match with the rest of them and two were different than the others. with no instructions telling you which primary they went to.... after about 3 attempts i finally found out what bolt went where (after removing the ac pump) also the bolts run so close to the primary that you need to make sure they all go in at the same time not front and back or u cant start the middle bolts.. you need to install them like a set of chevy headers! if i wanted to play stupid games with a chevy id drive a chevette not a mustang! in the long run im happy they dont leak and have GREAT quality if i were to do it again and wanted to have a fun job like it should have been id buy bbk!

    justin

    Year: 1995 Model: GT Driving Style: Show

    Helpful (1) (1)

More Products You Might Like

Related Categories