Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping on Everything. Seriously. Details

How to Install Raxiom Gen5 tail Lights on a 2005 - 2009 Mustang

Installation Time

2 hours

American Muscle
Shop Parts in this Guide

Step 1:

Use a at-head screwdriver to remove the 4 clips holding the plastic trunk trim in place.


Step 2:

Unplug the wiring harness and use an 11mm socket or wrench to remove the 3 nuts holding securing the tail lights. Push out the rubber grommet, where the harness feeds through the sheet metal, and remove the light.


Step 3:

Feed the wiring harness through the hole, making sure the rubber grommet is seated properly as pictured.


Step 4:

Reinstall the light, securing it with the 3 factory nuts removed in step 2. Repeat for opposite side. This completes the install of Raxiom’s 2013 Style Tail Lights


This guide applies to Vehicle years: 2005, 2006, 2007, 2008, 2009 and Submodels: GT, V6, GT500, Bullitt