WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping on Everything. Seriously. Details

Matte Black Lower Rear Valance Accent (99-04 GT, V6, Mach 1; 99 Cobra)

Market Price $29.99 You Save 17% ($5.00)

$24.99

FREE Shipping
  • Item 26116
In Stock Ships same business day. Choose options to add to cart

Features, Videos & Details

  • Aggressive Custom Styling
  • Premium Cast Matte Black Vinyl Material
  • Perfect Fit
  • Fits 1999 to 2004 V6, GT, Bullitt and Mach 1 Mustangs
  • Fits 1999 Cobra

Review & Installation Video

Hey everyone I’m Justin with AmericanMuscle.com checking out a very budget friendly way to change up the look of your rear bumper, thanks to this AmericanMuscle rear valence decal for all 99-04 Mustangs, available in either gloss black, or a matte black finish like we have on our 2000 V6. We here at AmericanMuscle test fit each one of our vinyl designs on our own fleet of cars first, to ensure a perfect fit every time. Now as you can see we’ve paired our rear valence up with a blacked out third brake light and also the blacked out rear deck lid panel which looks awesome. This decal blacks out the lower portion of your bumper thanks to the premium cast quality vinyl, eliminating the need for any permanent modifications or expensive paint. The result, a much more aggressive look that’s sure to turn a few heads. The decal installs in about an hour using the supplied instructions and a squeegee. Now a little pointer here, the decal does ship rolled up so a good idea would be to let it sit out on a flat surface for about 24 hours just to help make install a lot easier. So if you’re looking to change up the rear styling of your New Edge Mustang without breaking the bank, then you’ll definitely want to check out this AmericanMuscle rear valence decal.

Aggressive Styling. Black out the lower portion of your Mustang's rear valance (bumper cover) for aggressive custom styling that everyone one will remember when you pass them on the street or the track.

Perfect Fit Guaranteed. Our vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure a perfect fit every time.

Superior Quality Materials. Made from the highest quality Premium Cast Vinyl available on the market today - designed to last at least 8 years of harsh outdoor weather. They are far more durable than our competitors cheap, calendared vinyl film which starts to degrade in just a couple of years!

Application. This high quality matte black Lower Rear Valance Blackout Decal will fit the 1999 to 2004 V6, GT, Bullitt and Mach 1 Mustangs as well as the 1999 Cobra with the factory style rear bumper cover.

Fitment: 1999 2000 2001 2002 2003 2004 Details

What's in the Box
  • (1) Lower Valence Blackout
    Tools included:
  • (1) Squeege
Installation Info
Will it fit my Mustang?
  • Bullitt - 01
  • Mach 1 - 03, 04
  • V6 - 99, 00, 01, 02, 03, 04
  • GT - 99, 00, 01, 02, 03, 04
  • Cobra - 99

Most Helpful Reviews

5/5
Rear matte black valance decal

Pretty easy to install with directions given. Takes some patients. Be sure to keep blade and surface super clean. Its vinyl it scratches easily. Well worth the money. Will probably actualy paint it later ...

Read More
Helpful (1)

5/5
A little tricky to install

At first, I felt the item was cut about a quarter of an inch too short length wise. As I was putting the decal on, I realized that my valance would not be covered as I would have liked. I was getting ready ...

Read More
Helpful (1)

Overall Rating 4.6 out of 5 stars
Read All 71 Reviews

Customer Photos (78) Submit Your Photo

View All 78 Photos

You Might Also Like

4 Questions / 9 Answers

Ask a Question

Just wanting an opinion. To all mustang owners out there, how do you think this decal would look on an 01 maroon mustang that had smoked headlights but white letter inserts? If I can get another ones opinion that'd be great. Thanks.

DylanW

  • definitely think it adds to the rear end of the mustang with this, deckild, and letter inserts, your stang will be looking much better

    jhurt

    Good Answer (1) (0)

Show 1 more answer Answer This Question I need this answered (0) (0)

Chrome rims How will this look on a rio red mustang with chrome rims? All I see is it with black rims

Claybaybay10

  • It depended on what you personally like. The main focus for these is to amplify the letters in the rear bumper. I personally do not like black wheels on any car and the chrome letters look gawty. I would say you will probably get the look you are going for with this product and chrome rims. Good luck

    DriftedGT

    Good Answer (1) (0)

Show 1 more answer Answer This Question I need this answered (0) (0)

HI, I just bought a 2001 mustang V6. I just put in a new dual exhaust system. But now I want to upgrade its look. Can anyone help me name all the add ons to the red mustang in the picture? I would like to model my car after this! Thanks

Chris123

  • The red Mustang featured in these pictures has quite a few modifications done to it. It has an OE Style Rear Spoiler - Unpainted (99-04 All), item # 94442, (http://www.americanmuscle.com/oe-rear-spoiler-9900.html). A MMD Black Billet Aluminum Fuel Door (94-04 All), item # 41254, (http://www.americanmuscle.com/black-fuel-door-9904.html). The Smoked Quarter Marker Light Tint (99-04 All), item # 26086, (http://www.americanmuscle.com/smoked-quarter-tint-9904.html). The Matte Black Rear Decklid Blackout Decal (99-04 All), item # Item #26170, (http://www.americanmuscle.com/decklid-panel-decal-matteblack-9904.html). The Matte Black Bumper Insert Letters (99-04 GT, V6, Mach 1; 99 Cobra), item # 26600, (http://www.americanmuscle.com/9904-matteblack-bumper-inserts.html). This is just to name a few. Get in contact with one of our Mustang Experts by following the link below. We can help you find all the parts that are on this car! http://www.americanmuscle.com/contact.html

    AshleyK

    Good Answer (0) (0)

Question Resolved

air bubbles is it easy to install or is there lots of air bubble?

99mustanggt

  • No air bubbles, dont be shy with the soapy water spray and take your time to squeegee it out. Wrap a cloth around the supplied squeeegee . After you get most of the soapy water out, wait half hour and go over it again. Install this in the shade or in your garage, if you are in hot sun you will have less working time to get the bubbles out. I did the hood, back deck , leters and valance in less than 3 hours. Tip: spray the decal as you remove it from the release paper to stop it sticking to itself.

    Shomberg

    Good Answer (2) (0)

Show 3 more answers Question Resolved

More Products You Might Like

Customer Reviews (71) Write a Review

Overall Rating 4.6

out of 5 stars

Installation Time:Less than 1 Hour

  • Fit 4.5 4.5
  • Appearance 4.896552 4.9
  • Bang For Your Buck 4.206897 4.2



  • 5/5

    Installation Time: Less than 1 Hour

    January 29, 2014

    A little tricky to install

    At first, I felt the item was cut about a quarter of an inch too short length wise. As I was putting the decal on, I realized that my valance would not be covered as I would have liked. I was getting ready to pull it off and send it back for a refund and then decided to let it almost dry completely and stretch it into place. That was the trick. I was able to get all the bubbles out and it looks great. I coupled this with the honeycomb black out panel and what a difference this made. These broke up all the red in the rear nicely.

    Special20

    Year: 2003 Submodel: GT Leesburg, GA

    Helpful (1) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    November 05, 2013

    Matte Black Lower Rear Valance Accent

    American Muscle provides you with what you need to complete the project, although the instructions included in the box mention a soap and water solution that isn't brought up prior to where it says to use it and isn't described. The decal itself is very forgiving and allows for some minor repositioning if you don't get it right the first time. You have to work with it a bit to get it to wrap and stick the way you want it to, but it makes a big difference to the rear end of the car and doesn't look cheap. It is just a small detail that works.

    Jason816

    Year: 1999 Submodel: GT Oklahoma, USA

    Helpful (1) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    May 12, 2012

    Stressful

    The product looked great but the installation wasn't very great. My dad and i are perfectionists and while we were putting it on and taking it off a couple times it stretched. So we had to use a box cutter to trim a little bit off the ends to fit. I recommend having a partner help you with this product. Other than that, the squeege that comes in the box is very helpful and also use a hair dryer to help get the air bubbles out. Also don't take the whole vinyl off at one time. You want to have the white paper (what the vinyl came on) still intact with it just in case you mess up and so it wont fold on itself.

    Sandwich44

    Year: 2003 Submodel: V6 Atlanta, GA, USA

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    March 02, 2012

    Rear matte black valance decal

    Pretty easy to install with directions given. Takes some patients. Be sure to keep blade and surface super clean. Its vinyl it scratches easily. Well worth the money. Will probably actualy paint it later in year or two. Depends how long it remains looking sharp, and fresh.

    Mpks92

    Year: 2002 Submodel: GT Mariposa CA.

    Helpful (1) (0)

  • 3/5

    Installation Time: Less than 1 Hour

    March 10, 2012

    Spendy Sticker

    I think it was way over priced, but it does look nice. Not sure how many you sell but more people may buy if the price was right.

    AlanticBlueStang

    Year: 1999 Submodel: V6 Washington St

    Helpful (7) (0)

  • 5/5

    July 12, 2011

    Lower Rear Valance Blackout Decal

    was this easy or what ! yes it was and it looks great . love the new look . us v6 people need all the help we can get .

    JD

    Year: 2002 Submodel: V6

    Helpful (10) (2)

  • 5/5

    Installation Time: Less than 1 Hour

    August 12, 2013

    Great styling

    This has been on my list of styling pieces to get for my car for a while, but I finally decided to pick it up. I have a silver convertible, so the black goes really nicely with the silver. The fit wasn't perfect, there seemed to be a little extra material on the bottom of it to go over the bottom lip of the bumper, but I got it to fit and look well. Installation is easy, just get some soapy water to place the vinyl onto the bumper. You then use a card in the box to smooth out all of the bubbles that will be under the piece. Finally, grab a hairdryer to get the piece to fit perfectly on the bumper.

    CiscoKid15

    Year: 2001 Submodel: GT Parma, OH, USA

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    May 07, 2012

    A Nice Touch for a Plain Rearend

    Just peel and stick. Thats all there is to it, just be sure to get the sticker wet so you can get it placed before it dries. Looks great and is a perfect accent

    SteveO

    Year: 2002 Submodel: GT Harrisburg PA

    Helpful (2) (1)

  • 4/5

    Installation Time: Less than 1 Hour

    October 01, 2011

    Looks good

    It makes a big difference in the apperance of my stang.I love the way it looks and how easy it was to install, overall im very pleased with my purchase!

    MarcusW

    Year: 2001 Submodel: V6 Cookeville, Tn

    Helpful (1) (0)

  • 5/5

    July 15, 2011

    love it!!!!!

    received this decal today and installed as soon as i got it...easy install and wow does it look great on my mach 1 just check out the picture azure blue....if u thought about buying u def. should...thanks AM

    ryan

    Year: 2004 Submodel: Mach 1

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    June 04, 2013

    Dent Fix

    The previous owner had someone back into this car. Looks like the Hitch Ball from possible PU Truck. Minor dent, but major scrape. All I had to do was a little sanding smooth, and apply this to pretty much cover it up as if it wasn't damaged. Great improvement. And very easy to do.

    ACRanger

    Year: 2000 Submodel: GT Union City, TN 38261, USA

    Helpful (1) (1)

  • 2/5

    Installation Time: Less than 1 Hour

    March 22, 2014

    looks awsome but......

    so i bought this the matt black mustang letters and the light tints did it all in about 1 and a half hour but the valence was about 1 mm to tall it hung over the top and bottom soo it flew off on the highway after a week iol. at least it looked sweet for a week

    mrmach1

    Year: 2004 Submodel: Mach 1

    Helpful (0) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    October 07, 2011

    lower rear valance

    Wow!!! Is the only thing i could say! This product changed my bumpers completely. It really stand out in my screaming yellow mustang!!! I'll really recommend this product to anyone, n is really easy to put it on!!!! Thanks American Muscle. :)

    zeek

    Year: 2004 Submodel: GT cali

    Helpful (1) (2)

  • 5/5

    July 22, 2011

    Sick!

    This addition really makes my mustang thrive even more. It adds a nice touch with the mustang letters inserts. If you are looking to be a little more unique, definitely look into some matte covers! Was confused at first on how to install because I didnt skip step 2! If you get the normal matte cover and not the glossy one make sure you skip to step 4! (just peal that paper stuff off!) American Muscle=awesome quality products!

    Tom

    Year: 2000 Submodel: GT

    Helpful (1) (2)

  • 2/5

    July 20, 2011

    decal

    Product seemed of decent quality, instructions were great and so was the squeegee they sent with it. that's about where the good part ends. Before you go to install this thing put it in the freezer or something. The decal had been sitting at room temperature for a day or two before I went to install it. Once I went to do so, no matter how lightly you try to pull it to get it tight and flat over the surface, the thing would stretch. Maybe I just got a bad one, but I ended up throwing it out. Money well wasted.

    Joe Cat

    Year: 2004 Submodel: GT

    Helpful (0) (1)

  • 5/5

    July 20, 2011

    Matte Black Lower Rear Valance Blackout Decal (99-04 GT, V6, Mach 1)

    Went on relatively easily. Looks excellent.

    Russell

    Year: 2002 Submodel: GT

    Helpful (0) (1)

  • 1/5

    October 13, 2016

    Didn't fit

    I just got the rear valance in the mail 2 days ago, I let it sit out flat for that time before I installed it. It was not a perfect fit like AM said it was to be. It over hang almost a half inch, I tried cutting it down but it looked sloppy. I was disgusted and ended up putting it in the trash. What a waste of $20.

    Mach03

    Year: 2003 Submodel: Mach 1

    Helpful (0) (0)

  • 5/5

    September 29, 2016

    Great product

    Great prouduct! Instructrions were simple and install was easy, fits perfect too. All for a great price as well.

    MannyEG4

    Year: 1999 Submodel: GT

    Helpful (0) (0)

  • 5/5

    August 22, 2016

    At At At

    This is a great item,goes on great. Looks great would reccomend for sure!

    Mel

    Year: 2000 Submodel: V6

    Helpful (0) (0)

  • 5/5

    August 15, 2016

    Valance Centerfold

    Thanks American Muscle for the endless amount of items available for my Mustang GT. The valance really defines the back bumper to be a show worthy car. Silver paint and black accent go together well. Plan on adding other things in the near future for both performance and style.

    Silvergt

    Year: 2004 Submodel: GT

    Helpful (0) (0)

Related Mustang Categories