Black Friday Sale Shop Up To 60% Off
Talk to a Mustang Expert
Mon-Thu 8:30am-11pm, Fri 7am-11pm Sat-Sun 9am-7:30pm

Free Shipping on Everything. Seriously. Details

How To Install a Ford Motorcraft PCV Valve on your 1980-2001 V8 Mustang

Installation Time

30 minutes

Tools Required
  • Flat head screwdriver
  • Pliers
  • Shop rag
American Muscle
Shop Parts in this Guide

Removal Procedure: 

1. Raise and secure hood. 

2. Remove the two vacuum lines from the upper intake tube. Loosen the two band clamps securing the upper intake tube, and then remove it from the engine compartment. 

3. Locate the PCV valve, and remove the vacuum line. Carefully clean around the PCV valve with a shop rag. Using the pliers, give the PCV valve a counterclockwise twist and pull it out of the valve cover. 

Installation Procedure: 

1. Install the new PCV valve into its respective location. 

2. Reconnect the vacuum line to the new PCV valve. 

3. Replace the upper intake tube and tighten the two band clamps that secure it with the flat head screw driver. Reconnect the two vacuum lines to the side of the upper intake tube. 

4. Lower hood and enjoy. 

Installation Instructions Written By AmericanMuscle Customer John Collmann 6.5.2013 

This guide applies to Vehicle years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 and Submodels: Bullitt, Foxbody, Cobra, GT