Improves Off The Line Bite.
Are you looking to install a steeper set of gears in your Pony to get more low end grunt off the line? Then look no further than a set of Richmond gears. Richmond has been making high quality gears at a friendly price for well over 80 years.Made in the USA.
Manufactured right here in the USA, Richmond uses state-of-the-art manufacturing and extensive testing to produce a superior quality ring and pinion gear set at an excellent price.Application.
This Richmond Ring and Pinion Gear set will fit all 1986 to 2014 V8 Mustangs including GT, Bullitt, Mach 1, Cobra and the 11-14 V6 Mustangs equipped with the 8.8" rear end. A master bearing kit is recommended by most installers, especially on high mileage vehicles, see drop down option above.Attention 2010 and newer Mustang Owners.
Starting in 2010 Ford changed the inner rear gear pinion bearing in all 8.8" equipped Mustangs. Because of this you will require a new 8.8" rear gear pinion bearing (Ford part# 9L3Z-4630-A) for proper installation, please see drop down option above.
Technical Note. Installation costs will vary, but a good rule of thumb is between $250 and $300. Be sure to work with a reliable shop that you trust for installations. You can also save money on your installation labor by having your Trac-Lok rebuilt at the same time as your gears are installed, see drop down option above.
1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Details >>