Free Horsepower: Win a C&L Cold Air Intake & Bama Performance Tuner Enter to Win
1-888-332-7930 M-F 9-9 EST, Sat 9-5:30 EST

Free Shipping on Everything. Seriously. Details

Shelby Satin Map Light Accent w/ Buttons - Sensor Cutouts (05-09 All)

AmericanMuscle no longer carries the Shelby Satin Map Light Accent w/ Buttons - Sensor Cutouts (05-09 All). Please check out for an updated selection.
8 Reviews
Our Price

$42.99

  • Item #12521
  • Market Price $49.99
  • You Save 14% ($7.00)
Free Shipping on Everything

AmericanMuscle no longer carries the Shelby Satin Map Light Accent w/ Buttons - Sensor Cutouts (05-09 All). Please check out for an updated selection.

Customer Photos
Features
  • Sleek Styling.
  • Features Shelby Script Logo.
  • Satin Finished Aluminum.
  • Easy 5 Minute Installation.
  • Fits 2005 to 2009 Mustangs with active anti-theft.
Description
Sleek Styling. This Shelby Map Light Accent Trim with matching buttons goes perfectly with the existing satin accents of your 2005-2009 Mustang. It features the Shelby Script logo and helps complete the unfinished look of your stock interior. Fitment. This Shelby Map Light Accent is designed with holes for use on 2005-2009 Mustangs with the active anti-theft device.

Easy Install. The Shelby Satin Mustang Map Light Accent with matching buttons installs easily with the supplied double sided tape for a simple 5 minute install.

Mustang Fitment: 2005 2006 2007 2008 2009 Details

What's in the Box
  • (1) Light Accent
  • (2) Buttons
Installation Info
Tech Specs
Specifications

  • Fits 2005-2009 Mustangs
  • Sleek Satin Finish - Matches Factory Satin Finish
  • Shelby Script Logo
  • Easy 5-Minute Install
  • Designed for Mustangs w/ Active Anti-Theft Device
  • Fitment
    • Bullitt - 08, 09
    • V6 - 05, 06, 07, 08, 09
    • GT - 05, 06, 07, 08, 09
    • GT500 - 07, 08, 09

    Most Helpful Reviews View All

    Overall Rating 4.1/5 Write a Review
    3/5
    Missing button adhesive

    The bezel comes with 3M adhesive but the buttons don't used another 2 sided tape I had laying in the tool box. The holes for the anti theft are pierced through the aluminum leaving ragged edges, used 400

    Read More
    Helpful (1) (0)

    5/5
    Shelby Map Accent

    Adds a nice touch car interior. Good fit/easy installation. The buttons the best I can tell do not require tape. When you put them on without tape you cannot get them off.

    Helpful (0) (0)

    Customer Photos (1) View All

    You Might Also Like

    Q & A

    No questions about this product yet.

    Ask the First Question

    Reviews (8) Write a Review

    • 5 Stars .62 63%
    • 4 Stars 0 0%
    • 3 Stars .25 25%
    • 2 Stars .12 12%
    • 1 Stars 0 0%
    4.1

    out of 5 stars

    7 Customers Recommend this Product

    Installation Time:Less than 1 Hour

    • Fit: 3.8 3.8/5
    • Appearance: 4.4 4.4/5
    • Bang For Your Buck: 3.4 3.4/5
    Filter By Sort By
    • 3/5

      Missing button adhesive

      November 01, 2009

      The bezel comes with 3M adhesive but the buttons don't used another 2 sided tape I had laying in the tool box. The holes for the anti theft are pierced through the aluminum leaving ragged edges, used 400 grit water paper to blend out the sharp edges before it was installed. Looks good once in place

      Frank

      Helpful (1) (0)

    • 5/5

      Should of been like this from the Factory

      January 25, 2014

      Once I installed the Map Light it added some brightness to a dull black map light. You can install the trim and buttons with the Map Light on the car, I elected to remove it from the car so I can work on it easier. If you want to remove the map light from the car, I looked up: http://1.cdn.lib.americanmuscle.com/files/49218-cust.pdf to help me remove the map light and disconnect the light wiring. It took me about 30 minutes from start to finish to install everything. (including the removal of the map light) If you install the trim and buttons with the map light on your car, should only take about 5-10 minutes. The buttons are definitely tricky to install and make sure you get them on straight. The buttons will have a tight fit, just make sure you do not push to hard, if you do push to hard, you could damage/break the factory buttons. The accent trim was easy to install, I used some Rubbing Alcohol to clean the surface of the map light where the trim piece would go. After I installed the trim piece, I applied some painters tape over it to help keep pressure on the trim to allow it to stick to the map light for about 5-10 minutes. If you do not want to use the tape that is included with the trim, you can replace it with a stronger 3M tape. All said and done, it looks good in the interior of the car, and I am very happy with the results.

      AMMatt

      Year: 2007 Model: GT500 Driving Style: Show 'Stangs I have owned: 2

      Helpful (0) (0)

    • 5/5

      Quick classy look

      July 24, 2013

      Definately worth the money, easy install, great look. The buttons were a liitle snug on my GT 500, so the caps don't completely cover the black light buttons, but it's not very noticable.

      Larmex14

      Year: 2007 Model: GT500 Driving Style: Show 'Stangs I have owned: 3 Des Moines, IA, USA

      Helpful (0) (0)

    • 2/5

      Shelby map accent light w/buttons (sensor cutout)

      April 27, 2013

      Appearance of the map light accent itself is very good. 3M tape didn't hold around edges. Button fit is poor at best, looks cheap. Way to expensive for what you get.

      EarlJr

      Year: 2007 Model: GT Driving Style: Daily Driver 'Stangs I have owned: 3 Middlebury, VT, USA

      Helpful (0) (0)

    • 3/5

      Looks good but could be made of better materials

      January 24, 2012

      Now take in consideration of the price and you may want to lower your expectations. Note that the product is made out of aluminum like a soda can. it is pretty playable and felt flimsy to the touch. It looks good despite that and is an easy fit and with 3m adhesive tape it will stay put. The product was a very easy install. Maybe Silver-horse racing product is better. Shelby American could have put a better product on market. Overall i give it a B-

      JustinGT500

      Year: 2007 Driving Style: Show 'Stangs I have owned: 2 San Antonio TX

      Helpful (0) (0)

    • 5/5

      satin accent map light cover

      December 08, 2011

      all the parts ,2 button covers and the face plate fit very well. it took less than 5 minutes to do the complete install. I was under the impression it was going to be constructed out of a heavier gauge material than what is made from.No matter looks good.

      1cattle

      Year: 2009 'Stangs I have owned: 2 texas

      Helpful (0) (0)

    • 5/5

      Satin Buttons

      April 01, 2011

      Very easy to install. Great look. Tape is provided. Not required for the buttons.

      Brad

      Year: 2007 Model: GT Driving Style: Show

      Helpful (0) (0)

    • 5/5

      Shelby Map Accent

      October 21, 2010

      Adds a nice touch car interior. Good fit/easy installation. The buttons the best I can tell do not require tape. When you put them on without tape you cannot get them off.

      Brad

      Driving Style: Daily Driver

      Helpful (0) (0)

    More Products You Might Like