Installation Time: Afternoon
July 01, 2013
Great price for an OE style graphics kit
Very good quality graphics material; similar to factory rocker stripes. Installation took about 3 hours as I made cardboard templates of the wheel openings, front/rear doors openings and pre-cut the stripes before applying to car. This process replicated the factory stripes as they were cut about an 1/8" from the wheel openings/door openings; they did not wrap around the wheel openings or door openings. I would recommend laying the stripe kit on a flat surface for a few hours prior to installing to prevent curling during the installation process. Also, be sure to use a spray bottle filled with water and a few drops of dish soap and liberally spray the rocker areas AND the stripe (adhesive side) after removing the paper backing. This will allow some movement to position the stripe prior to using the squeegee. Overall a great product and if you take your time, the cost savings of this kit vs. dealer kit is well worth the effort.