WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping - Get it by Dec. 24th available on most items - Details

Smoked Headlight Tint Kit (10-14 All)

Market Price $49.99 You Save 20% ($10.00)

$39.99 (kit)

FREE Shipping
  • Item 101812
In Stock Ships same business day. Choose options to add to cart

Features, Video & Details

  • Sleek Stealthy Styling
  • Aggressive Smoked Appearance
  • Durable 5 Mil PVC Vinyl Tint
  • Optically Clear with a Gloss Finish
  • Protective Film Prevents Scratches During Installation
  • Pre-Cut for Easy Installation
  • Allows Headlights to Shine Through
  • Sold as a Set of Two
  • Fits All 2010-2014 Mustangs

Review & Installation Video

Review & Install Video

Stealthy Styling. Now you can complete the stealthy styling of your Mustangs smoked fog lights with Smoked Headlight Tint from AmericanMuscle. This Smoked Tint will give your Pony sleek stealthy styling that looks great on both the street and the strip.

Perfect Fit Guaranteed. AmericanMuscle Graphics vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure a perfect fit every time.

Superior Quality Materials. AmericanMuscle Graphics uses only the highest grade of 5 mil cast vinyl tint available on today’s market. This 5 Mil thick lens tint is designed for lens tints. Compared to other products that were designed for window sign displays that are thinner. They also are not forgiving to install on the lights compound curve. The film is also breathable and self-healing polyvinyl film. The tint comes with 3 layers: protective layer, tint film layer, and backing layer. The protective layer protects the tint film during installation and is removed after installation. Our vinyl is rated for continual outdoor use without shrinking or degradation for up to 5 years. Thicker 5 mil vinyl remains flexible during installation to reduce the chances of wrinkling, yet still transmits 80% of light.

Impact Protection. AmericanMuscle Graphics 5 mil thick poly vinyl tint is breathable and features self-healing properties to provide good impact protection against stones, gravel and small road debris, all while still transmitting 80% of the light. A must for a daily driven vehicle.

Easier To Install. AmericanMuscle Graphics vinyl designs are not only pre-cut for a simpler installation, but our 5 mil smoked cast poly vinyl tint is extremely flexible allowing it to easily conform to complex compound curves without wrinkling and the clear permanent solvent polyacrylic adhesive backing will ensure that it stays securely in place. The tint comes with 3 layers: protective layer, tint film layer, and backing layer. The protective layer protects the tint film from scratches during the installation process and is removed when done.

Application. These AmericanMuscle Graphics Smoked Headlight Tint Decals are designed to fit all 2010-2014 Mustangs including the V6, GT, BOSS, and Shelby GT500 models. This Smoked Tint decal matches our smoked fog light tint perfectly.

Fitment: 2010 2011 2012 2013 2014 Details

What's in the Box
  • (2) Headlight Tint
  • (1) Squeege
Installation Info
Will it fit my Mustang?
  • GT - 10, 11, 12, 13, 14
  • GT500 - 10, 11, 12, 13, 14
  • V6 - 10, 11, 12, 13, 14
  • Boss 302 - 12, 13

Most Helpful Reviews

5/5
Blacked Out

Perfect fit, easy install, looks great. You do lose some lighting but not much.

Helpful (1)

5/5
Headlight Tint Kit

I have only 1 issues wth these headlight tints. The size of these LOOK a little small out of box. If you install correctly its a perfect fit. Looks great in the evening and doesn't scuff or scratch very ...

Read More
Helpful (1)

Overall Rating 4.2 out of 5 stars
Read All 92 Reviews

Customer Photos (83) Submit Your Photo

View All 83 Photos

You Might Also Like

8 Questions / 15 Answers

Ask a Question

Would these tints mess up the Headlight Splitters when applied?

youngstangman

  • No. This film will not "mess up" your splitters. However. If you want to keep the splitters, you will need to remove them off of the car, apply the tint, and then reapply the splitters. I plan to do this myself soon. However. I suppose in theory this film could be cut to fit around the splitter, but personally I wouldn't trust myself to cut the film precisely enough to apply it and still retain a good look.

    Dennasty22

    Good Answer (1) (0)

Show 1 more answer Answer This Question I need this answered (0) (0)

Spider web cracking? I've read about different tints causing spider web cracking in the headlights. Something about the plastic of the headlight and the tint expanding at different rates. Seems to be more of a plastic issue to me, but does anyone no if this is a problem here?

dtk7wb

  • I am unsure how long something like this would take to occur, but ive had my set installed for about a week now, and have had no issues. hope this helps.

    Dennasty22

    Good Answer (0) (1)

Show 2 more answers Question Resolved

Light visibility do these tints decrease headlight shine at night greatly? I would like to get a pair but i am not sure how much these will darken the headlights especially driving at night

Ajaved

  • These do decrease headlight output. If I were to guess about a 20-25% decrease compared to without the tint installed. However, if you have a set of fog lights, as I do, they do help a lot. and or you have the option to upgrade to some even brighter bulbs. the look you get IMO is worth it!

    Dennasty22

    Good Answer (1) (0)

Show 2 more answers Question Resolved

Is this kit DOT approved? I'd like to just get a tint, instead of buying different headlights, or painting the inside housing of the headlight. If it has been DOT approved, I will be ordering them.

RC13GT

  • I do believe tint or changing the lens is not DOT approved. Painting the housing black is one option and definitely allows your headlights to work to the full potential. Or going the other route saves all the hassle with new Hl's. Either way the tint film would be removable if you had to pass inspection.

    Kilo27

    Good Answer (0) (0)

Show 1 more answer Answer This Question I need this answered (0) (0)

How do these hold up when washing your car? Do they easily slide off if being hit by water and soap or do they stick on well?

JG2695

  • This tint hold on tight! I've washed my car plenty of time since installation. And they look just as they did day one. Just be sure to really clean the surface of your headlight to ensure the best possible seal between the tint and headlight. Also, be sure to allow the film to dry completely before driving. I would say atleast a few hours. But the longer the better. Hope this helped!

    Dennasty22

    Good Answer (0) (0)

Show 2 more answers Question Resolved

State inspection Has anyone had a problem passing a state inspection with the headlight tint, especially combined with the headlight splitters?

Coyote2114

  • Nevada, the state I live in, doesn't have state inspectors however, state law prohibits running these at night as they do cut the intensity by quite a bit. You can use them during the day though. They come with three Velcro pads attached to the inside of the lens so that it can stick to the face of the stock lens. They have a clip on the top so they do hold pretty well and can pop off easy enough. So right before you go to your inspection, pop them off and you shouldn't have any issues from the inspector.

    rnrstar

    Good Answer (0) (1)

Show 1 more answer Answer This Question I need this answered (0) (0)

More Products You Might Like

Customer Reviews (92) Write a Review

Overall Rating 4.2

out of 5 stars

Installation Time:Less than 1 Hour

  • Fit 4.25 4.3
  • Appearance 4.715909 4.7
  • Bang For Your Buck 4.420455 4.4



  • 5/5

    Installation Time: Less than 1 Hour

    November 04, 2016

    Headlight Tint Kit

    I have only 1 issues wth these headlight tints. The size of these LOOK a little small out of box. If you install correctly its a perfect fit. Looks great in the evening and doesn't scuff or scratch very bad. I also waited about 12 hours to drive after installing to ensure the fit. REMOVE THE CLEAR PLASTIC! after the install I thought there were bubbles until i peeled off the clear.

    Chop63

    Year: 2013 Submodel: V6

    Helpful (1) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    December 02, 2015

    Really easy and good looking mod

    If you're looking for that dark almost black out front end look but don't want to buy the covers that leave you diving blind this is the best way to go, during the day it gives your lights a nice fogged out look and when the lights turn on at night you lose no visibility, I have my hids on and even w these people still flash their high beams bc they're still to bright. Then when you leave her parked and go see them at night they look just as black as the covers

    THESTRIPEGURU

    Year: 2011 Submodel: V6 Miami, FL

    Helpful (1) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    July 02, 2015

    sweet look however it has its downsides

    the look of the part is awesome. mixed with the rest of the black out tints the car looks sharp. that said be prepared to upgrade your headlight bulbs as they make night time driving rather difficult.

    MikeD

    Year: 2012 Submodel: V6 Downingtown, PA

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    December 24, 2014

    Blacked Out

    Perfect fit, easy install, looks great. You do lose some lighting but not much.

    Blackmaumba

    Year: 2014 Submodel: GT Birmingham, AL, USA

    Helpful (1) (0)

  • 2/5

    Installation Time: Less than 1 Hour

    December 18, 2014

    Looks good, but bubbles

    I LOVE the look of this tint on the lights. I had already tinted the fog lights and blacked out the pony emblem, so this looks sinister! It was extremely easy to install, however....it keeps bubbling up. I put a needle in the bubble and work the air out, but it keeps getting bubbles. It also nicks easily. I think I'm going to write this item off and go with the covers.

    rarert

    Year: 2013 Submodel: GT Indianapolis, IN

    Helpful (1) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    September 19, 2014

    Finishes off the front end

    I love the way the smoked headlights look. Especially on a black car. Fit was a little small so it takes two people to apply. One holding the hair dryer and the other stretching the tint. The tint is high grade material, so you don't have to worry about ripping it while stretching the tint to fit. Overall love the look and it's a good quality material. I would definitely buy again.

    Shelby85

    Year: 2011 Submodel: GT500 Galesburg, IL, USA

    Helpful (1) (0)

  • 1/5

    Installation Time: Less than 1 Hour

    March 06, 2015

    Wouldn't buy it again.

    First off, the film cutout came folded in half, and had created sharp wrinkles in the middle of the film during shipping. After spending a few days under 2 of my old college text books, it flattened out decently. As far as the product, I might have been better off having my 7 year old nephew cutout tint film and applying it myself. The cutout is a hair short on all 4 edges and conners. The light shines right thru the edges, especially the LED side. Cutouts like this should always be a little bit oversized so it roll around the edges and provide complete coverage, but this product didn't have that. Neatless to say, I removed these tints after 5 mins on the car. In my opinion, the tint shade should darker, I prefer 5 visibility, and not the 20-ish this was. Let me point out that I'm a huge AM fan, and I will always continue to support and buy from them, except for this product.

    Sev302

    Year: 2013 Submodel: GT Glendale, CA

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    August 25, 2014

    Gave my black stang a sinister look without sacrificing visibility!

    I was worried before purchasing the headlight tint about visibility. I knew it would look awesome but would it be worth it for night time driving? Absolutely! I can see just fine and when I get out of the car I can't stop looking back at it. It looks amazing and it was so easy to install.

    Lawnchaircrew

    Year: 2012 Submodel: V6 Denver, PA

    Helpful (1) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    August 06, 2014

    Looks great

    It looks great. Like others have said though, it really cuts down on the lighting at night. I drive with my driving lights (GT) on to compensate for it. Even the hi-beams are dimmer than the driving lights. But, in the daytime - wow, it looks awesome !

    AceRockola

    Year: 2014 Submodel: GT Virginia

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    July 30, 2014

    smoked headlight tint kit

    looks great, easy to put on, main think, my wife loves them

    grinder4457

    Year: 2014 Submodel: V6 southern Indiana

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    July 25, 2014

    What a Difference!

    Love how these make my front end look. Followed the instructions and I was done with both in less than 15 minutes. Like other have stated these are just slightly smaller than the actual headlamp so placement is key. I went outside - in and found that to be quick and easy. This tint is sold out in two days so if it's available, don't wait. Get it.

    Puffy1228

    Year: 2014 Submodel: GT Maryland

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    July 19, 2014

    made my car look awesome BUT you lose a little brightness @ NIGHT

    It looks awesome thank god the lights are so bright but you defiantly lose some brightness out of you headlights. If you live in the country you may want to be careful. but easy install and they add a mean look to the car. White 2014 Convertible

    2014ConvertibleMustang

    Year: 2014 Submodel: V6 Madison, WI, USA

    Helpful (1) (0)

  • 3/5

    Installation Time: Afternoon

    July 19, 2014

    looks great

    To a little while to put on right. But I got it to fit and it looks great.

    Marine7214

    Year: 2010 Submodel: V6 McKinney, TX, USA

    Helpful (1) (0)

  • 4/5

    Installation Time: Less than 1 Hour

    July 18, 2014

    Smoked Headlights a huge difference.

    This product makes your mustang look magnitudes meaner without breaking the bank. The install was easy. Just remember to remove the protective cover AFTER the final squeegee. It is also a good idea to get brighter bulbs. I noticed a little decrease in light but a lot less than I expected. Overall great way to make a mild mannered mustang into a mean, glearing monster!

    Harvc6

    Year: 2012 Submodel: V6 FL

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    July 13, 2014

    Great Product

    I've been looking for several ways to give my GT that sinister dark look. I have tinted everything on my mustang but the headlights were the one thing left that was still popping out to me. I did research and asked around, sure headlight covers definitely give that blacked out look but the visibility decreases substantially. When I saw that American Muscle finally release this tint I immediately place an order. It took maybe less then 30 minutes to do both headlights, I took my time to make sure it fit correctly and get those air bubbles out. The fit isn't perfect but its very minor, you wouldn't notice unless you were extremely close to the headlight. Installation is easy as any AM vinyl tint, the visibility did lessen a little but was it worth it? Definitely was! My car definitely turns heads now. So overall great product from AM, great look, great value, and a descent price. Definitely would recommend this product to anybody.

    PLL1775

    Year: 2013 Submodel: GT Poplar Bluff, MO 63901, USA

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    July 11, 2014

    Love the smoked look!

    Fit is great once you mess with it a little bit and these look amazing. So much better than covers in my opinion.

    Will2004

    Year: 2014 Submodel: GT Philadelphia, PA, USA

    Helpful (1) (0)

  • 1/5

    Installation Time: Less than 1 Hour

    July 25, 2014

    Headlight Tint

    This product was a waste of $30 bucks. After the first trip out the tint became bubbled. I guess the product was not speed rated or from sitting in the sun or what happened. I smoothed the tint back out and it was sitting in my garage and I noticed the bubbles, streaking bubble lines in the tinit film. Needless to say the tint was pulled off and thrown into the garbage. Thanks, Alex palmer

    APalms

    Year: 2011 Submodel: GT Brandon, SD

    Helpful (0) (1)

    • Response from AmericanMuscle

      Not sure how long after installing that you went for a drive, but the tint needs to have enough time to adhere properly once applied. I'm sorry you had some issues with the kit you received. If you'd like to have a replacement set shipped out, we can definitely get that taken care of. Just give our customer service a call to let us know.

      Lisa , Customer Care

  • 5/5

    Installation Time: Less than 1 Hour

    July 18, 2014

    High quality product, easy installation.

    If you are considering buying this product, STOP. Buy it now. This high quality headlight tint vinyl was a quick and painless installation. Thanks to the squeegee and detailed instructions provided by AM! 25 minute installation time start to finish by myself. A very simple way to transform your mustangs front end, for a more than reasonable price. Thanks American muscle for another great product!

    Bryan14

    Year: 2014 Submodel: V6 Houston, TX, USA

    Helpful (0) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    November 08, 2015

    Nice nice nice

    This took my mustang to the next level. It took every bit of 10 minutes to install and when finish, Amazing. Order came quick with good instructions. Thanks AM keep it up.

    Jp

    Year: 2011 Submodel: V6 Bartlett, Tn

    Helpful (0) (1)

  • 1/5

    Installation Time: Less than 1 Hour

    April 07, 2015

    One side was good the other was not

    The right side came out fine and it took a few minutes to get the placement right and I really had to spray the tint and smooth it out and I finished with a hair dryer to make sure everything was good. The left side had some bubbles in the film on the top from pulling it out of the package but I thought I could heat and smooth it out but it bubbled worse and creased so now I have tint on one side.

    Hecklerx311

    Year: 2013 Submodel: GT Royal Oak, MI

    Helpful (0) (1)

    • Response from AmericanMuscle

      We can have another set shipped out for you. Please do give our customer service a call at your earliest convenience so we can have that taken care of right away.

      Lisa , Customer Care

Related Mustang Categories