Talk to a Mustang Expert
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping on Everything. Seriously. Details

Smoked Tail Light Tint (10-12 All)

100+ Reviews
Our Price


  • Item #26089
  • Market Price $49.99
  • You Save 20% ($10.00)
In Stock Ships same business day. Choose options to add to cart
Free Shipping on Everything
Product Videos Customer Photos
  • Sleek Stealthy Styling
  • Aggressive Smoked Appearance
  • Durable 12 Mill PVC Vinyl Tint
  • Optically Transparent with a Gloss Finish
  • Provides Additional Impact Protection
  • Pre-Cut for Easy Installation
  • Allows Brake Lights to Shine Through
  • Sold as a Set of Two
  • Fits All 2010-2012 Mustangs
Stealthy Styling. Now you can add stealthy styling to your 2010-2012 Mustang with Smoked Brake Light Tint from AmericanMuscle. Smoked Tint will give your Pony sleek stealthy styling that looks great on the street or the strip.

Perfect Fit Guaranteed. AmericanMuscle Graphics pre-cut vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure an easy installation and a perfect professional fit every time.

Superior Quality Materials. AmericanMuscle Graphics uses only the highest grade of cast vinyl tint available on today’s market. This 12 Mil thick lens tint is designed for lens tints. Compared to other products that were designed for window sign displays that are generally around 3 mil in thickness. They also are not forgiving to install on the lights compound curve. The material type and the 12 mil thickness provides superior impact protection. The film is also breathable and self-healing polyvinyl film. Our vinyl is rated for continual outdoor use without shrinking or degradation.

Impact Protection. AmericanMuscle Graphics 12 mil thick poly vinyl tint is breathable and features self-healing properties to provide superior impact protection against stones, gravel and small road debris. A must for a daily driven vehicle.

Easier To Install. AmericanMuscle Graphics vinyl designs are not only pre-cut for a simpler installation, but our 12 mil smoked cast poly vinyl tint is extremely pliable allowing it to easily conform to complex compound curves without curling back and the clear permanent solvent polyacrylic adhesive backing will ensure that it stays securely in place.

Application. These Smoked Taillight Tint Decals are designed to fit all 2010-2012 Mustangs and come complete as a set of two for both the left and right taillights.

Fitment: 2010 2011 2012 Details

What's in the Box
  • (1) Tail Light Tint
    Tools included:
  • (1) Squeege
Installation Info
Will it fit my Mustang?
  • GT - 10, 11, 12
  • V6 - 10, 11, 12
  • GT500 - 10, 11, 12
  • Boss 302 - 12

Most Helpful Reviews

2010 Mustang GT tailight tint

Not recommended; I could not get the multiple bubbles out of the tint even though I followed the directions and tried 7-8 times to remove/re-install the tint it still had bubbles in the tint. It looks ...

Read More
Helpful (1)

Tail tint

This product was simple to install at a great price. Just takes a little patience to get the bubbles out. The tint isnt that dark in the day and looks even better at night.

Helpful (1)

Overall Rating 4.4 out of 5 stars
Read All 100+ Reviews

Review & Install Video

Hey what’s up everyone Justin here with and I’m checking out a couple of different cool ways to add some stealthy styling to your 2010 and up Mustang thanks to the AmericanMuscle graphics smoked tint for your brake lights, quarter markers and side markers. The decals are precision cut from a durable dark smoked vinyl for a perfect fit and aggressive styling that’s sure to look good on any color Mustang. All AmericanMuscle graphics are produced right here in house and then test fitted on our very own cars first to ensure a perfect fit every time. Need proof? Check out our 11 second V6 project car and see for yourself. Installation should take you 15-30 minutes and be relatively easy if you follow our detailed instructions, and use a little patience. All these pieces are sold separately so you can pick and choose what lights you want to tint, to achieve your desired level of styling. Now if you’re trying to go full on stealth mode then you might want to try pairing all these looks together. I know some folks might say that smoking is bad for your health but not when it comes to your ride, that’s why you should check out some of these smoked vinyl options for your 2010 and up Mustang from AmericanMuscle graphics.

Customer Photos (100+) Submit Your Photo

View All 100+ Photos

You Might Also Like

8 Questions / 18 Answers

Ask a Question

Your on line instructions say to use soapy water to apply smoked tail light tint. The in box instructions say to use just water. Which method do you recommend and why please. Thank you


  • You don't want soapy water! If you have a CLEAN spray bottle, put in 5-6 drops of a mild shampoo, (baby shampoo), in the water. Do it when it's warm and out of direct sunlight. KEEP IT WET untill you get it in place. That small amount of shampoo will allow you to move the tint. Since there's very little soap, it will evaporate kinda quickly, GOOD LUCK!


    Good Answer (0) (0)

Answer This Question I need this answered (0) (0)

Can this tint be easily removed? If installed and decided i didnt want it anymore, would i be able to easily remove it?


  • The answer to that is yes and no. If install the tint and instantly decide you do not like it and want to remove it, then yes. Super easy. As simple as pealing them off. But the tint will become more difficult to remove the longer it is on. However, it is not impossible. Some hot soapy water and some "Goo Gone" to remove the unwanted glue residue and it will come off with a little elbow work.


    Good Answer (1) (0)

Show 4 more answers Question Resolved

matte or gloss Is it a gloss look or have a matte finish look?


  • It matches the way the stock taillights look. It's shiny but not overly shiny.


    Good Answer (0) (0)

Show 2 more answers Question Resolved

is there any way I can install this on top of the 2013 style taillight conversion decals?


  • If done very carefully and applied correctly this should be able to be applied over top of a previous decal.


    Good Answer (0) (0)

Question Resolved

Smoked tail light kit & matte black light trim I'm thinking about purchasing the smoked tail light kit & the matte black light trim, Whick one would I need to install first?


  • You'd want to install the tint first, then the matte black light trim. The trim installs using 3M tape that once it's stuck, it won't be coming back off easily. It makes more sense to install the tint first so you don't have to remove the trim and then reinstall it. Hope this helps!


    Good Answer (2) (0)

Show 2 more answers Question Resolved

can you still wash your car like normal after installation of this tint?


  • Washing your car normally should have no negative effects on this tint as long as you're not normally using a power washer!


    Good Answer (3) (1)

Show 4 more answers Question Resolved

More Products You Might Like

Customer Reviews (100+) Write a Review

Overall Rating 4.4

out of 5 stars

Installation Time:Less than 1 Hour

Installation Cost:0-$100

  • Fit 4.07971 4.1
  • Appearance 4.557971 4.6
  • Bang For Your Buck 4.42029 4.4

  • 5/5

    October 15, 2010

    Tail tint

    This product was simple to install at a great price. Just takes a little patience to get the bubbles out. The tint isnt that dark in the day and looks even better at night.


    Helpful (1) (0)

  • 5/5

    October 14, 2010

    2010 Mustang GT tailight tint

    Not recommended; I could not get the multiple bubbles out of the tint even though I followed the directions and tried 7-8 times to remove/re-install the tint it still had bubbles in the tint. It looks good from a distance but when you get close you can see all the bubbles.

    greg hazlett

    Year: 2010 Submodel: GT

    Helpful (1) (0)

  • 5/5

    June 28, 2010

    Very Nice Piece

    This tint looks great on my 2010, gives my pony a meaner look. Be careful when applying, use plenty of water and be sure to get out all the bubbles.


    Year: 2010

    Helpful (16) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    November 12, 2011

    Easier and better looking than I expected

    Considered spray tint but didn't want to experiment on a $450 light. Read up on the tint films and wasn't impressed with the install headaches people described. Figured I'd try it since it would only be a $50.00 screw-up. I was pleasantly surprise. I removed the light from the car and did the install inside with everything at room temp. I use tint application solution from Advanced Auto Parts. Sprayed the light, my fingers, the adhesive side, and other side with generous amounts. Used cloth on squeegee, so no scratches. Ended up bubble free with no haze. Very, very happy with results.


    Year: 2012 Submodel: V6 Central VA

    Helpful (9) (1)

  • 5/5

    October 24, 2010

    Its so nice..... if you can do it right!

    I wrote a review a while ago sayings that yes it looks good but it wasn't easy to put on. I ended up ordering another pair and this time I had more success. I'll give you guys the steps I took to get it right just in case the AM instructions aren't clear enough. Remove the tint from both the adhesive and non adhesive sides of paper. Getting the paper side off is easy, but the adhesive paper is a little trickier. What I did was spray the back of it with the water soap mixture and peeled away. Unfortunately, the on the first one I tried to do this alone and it started sticking to itself. Get someone to hold the paper while you pull the tint off slowly, make sure you dont rip it. After you have the tint off, spray the tail light generously. Place it on their so it aligns and make sure you stretch it so that it is firmly on the curves as well. Squeegee away after all looks good. On the very edges I just started using my finger and it seemed to work fine. Thats pretty much it. Just make sure you take it off carefully and be patient!

    David R

    Helpful (14) (4)

  • 5/5

    Installation Time: Less than 1 Hour

    November 17, 2011


    Got these in today for my 2012 GT. Not much else to say but awsome. Fit was near perfect and installed easily. However I learned from the 3rd brake light that these included instructions are not very good. Using the soapy water worked perfectly.


    Year: 2012 Submodel: GT Lovington NM USA

    Helpful (4) (0)

  • 5/5

    January 02, 2011

    tail light tint

    i ended up tearing my first one while pulling it off the paper, but still put on and used clear finger nail polish over tear. i learned off the first one to be very careful pulling off paper and just keep soaking both sides with ur soapy water and didnt tear the second one. after getting them on and lined up and squeegeed i used a hair dryer and kept using the squeegee too and mash the edges down while blowing with hair dryer. they lay down very good around edges of light from the heat of the dryer. i believe if i would have went ahead and ordered 2 sets i could have done perfect, but even the first set looks good enough to me and im very picky. worth the money and the look over stock if you just take ur time getting off paper and use hair dryer. also make sure its not very cold outside because it makes the tint more brittle.

    richard m

    Helpful (5) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    January 09, 2013

    Smoked Tail Light Tint

    I'm VERY happy with the purchase of this product! It materials are very sturdy and the glue/tacking on the back side has made for a very nice snug fit! It looks good on the car and the brakes when light look almost like it isn't even there. I would recommend this product to anyone!!


    Year: 2012 Submodel: V6 Mansfield, TX, USA

    Helpful (3) (0)

  • 5/5

    June 07, 2011

    Not too dark, just right.

    Be sure to have a lot of soapy water! Wasn't difficult to apply if you are patient with it and continually spray soap and water to the light and really take your time to work out the bubbles. Looks good during the day, definitely noticeable. However at night it really looks great! Would buy again.


    Year: 2011 Submodel: V6

    Helpful (6) (3)

  • 5/5

    Installation Time: Less than 1 Hour

    November 28, 2015

    Tail light tint

    Love the way my mustang looks with the tail light tint. Was a quick and easy install. Would recommend this to anyone.


    Year: 2012 Submodel: GT Virginia Beach, VA

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    September 20, 2015

    Nice !

    I really love how the look during the day and at night they're not so dark. Visible enough to not have cops pull you over for it.


    Year: 2012 Submodel: V6

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    December 23, 2014

    Maximum Bang for Buck

    Okay, so would it be PERFECT to just have smoked lenses? Sure! But for very little money and even less time I have something that is 99% there. The cut of these vinyl pieces is THAT good. You typically have to be less than 3' from my lights to know that they are tint and not smoked lenses. Perfect amount of tint too, still get plenty of light. Breeze to install and they come with everything you'll need. My advice is to hit them with a blow dryer on low for a few minutes (NOT A HEAT GUN!!!) as they will likely come folded in shipping. Lay them flat on a table and warm them just slightly with the hair dryer to get them to lay flat. This will make your install much nicer.


    Year: 2012 Submodel: V6 Pacific Northwest

    Helpful (1) (0)

  • 3/5

    Installation Time: Less than 1 Hour

    July 19, 2014

    Tail Light Tint

    I had ordered light tint for all the lights on my mustang except the foglights and headlights. Everything went on smoothly except these. They simply don't have enough tint to cover the light. I have OCD a little and like knowing that anything I do to my car is perfect. This product made me unhappy and has really been the only time that I have been unsatisfied with a product from American Muscle. I got taillight tint when I had my 2005 mustang and it went very smoothly mostly because it was three pieces, not one. t is very hard to put on being that anyway you try to put it on leaves a different spot untinted. From far away it looks great, but the closer you get the worse it looks. Be safe and have a window tinting place tint the taillights for you.


    Year: 2010 Submodel: GT Long Island, New York, USA

    Helpful (1) (0)

  • 1/5

    Installation Time: Weekend

    August 16, 2012

    Packaged inappropriately for consumer installation.

    I bought Quarter, Side, 3rd brake light and these Tail light tints, and all were packaged correctly except the Tail light tints. Ironically, the other items cost less, however this proved to be the most difficult. I read the instructions, reread them, proceeded with the easiest (quarter tints) first, and then reread directions for each one. You only have one shot to install them 'right', so I'd rather be safe than sorry. To no avail, I was EXTREMELY disappointed with the Tail Light tints. They were on a flimsy paper and hard to get off. Once, I did get them off, they did not fit snug, were too flexible and created a horrible look. Again, this is in contrast to the others as they look great! To be honest, I am probably going to take my business elsewhere. I planned on buying a new hood, new rims/tires, new steering wheel and hood scoops from American Muscle, but may just go to a competitor and try their stuff out. I was really, REALLY bummed by this. Oh, I also bought a 'stang GT shirt and am happy with that item. Maybe, if AM took back the faulty item, refunded me money, or even gave me a credit for it, I would reconsider. I guess business in American just isn't the same.....shame.


    Year: 2010 Submodel: GT VA

    Helpful (1) (0)

    • Response from AmericanMuscle

      Lisa , Customer Care

  • 5/5

    Installation Time: Less than 1 Hour

    July 06, 2012


    Took less then 20 minutes to put and it looks great. Cheap and worth it!


    Year: 2012 Submodel: V6

    Helpful (1) (0)

  • 1/5

    Installation Time: Afternoon

    June 29, 2012

    Not worth the money.

    I had the taillight covers and those were great until one fell off. So I tried the tint instead, figuring since I tinted all the other windows through AM would be great. Biggest mistake is it comes in one large piece, makes putting it on almost impossible. After messing around for an hour on the one taillight, and having to reaaply countless times, the tint had stretched, making is useless to even try to apply the other side. Stick with the covers, which are darker, or just have them professionally tinted.


    Year: 2012 Submodel: V6

    Helpful (1) (0)

    • Response from AmericanMuscle

      Lisa , Customer Care

  • 5/5

    Installation Time: Less than 1 Hour

    July 16, 2012

    awesome till you get close

    this add on really gives your car and awesome and aggressive touch. the only issue was the bubbles. they are really difficult to get out and frustrating so i just left them in. but it doesn't really matter because you cant see them unless you are up close. a great thing about them is even though they are dark and very aggressive, you can still see the lights. very awesome add on!


    Year: 2012 Submodel: V6

    Helpful (1) (1)

  • 4/5

    Installation Time: Less than 1 Hour

    September 29, 2015

    alittle large but not to bad.

    First off DO NOT FOLLOW THE INSTRUCTIONS! The instructions explicitly say not to use soap and in my ignorance i followed that step. Now i have a few bubbles i need to pop. aside from that the tint looks phenomenal! its a tat big here and there but nothing a razor blade and a steady hand cant fix.


    Year: 2011 Submodel: GT

    Helpful (0) (1)

  • 4/5

    October 18, 2010

    Looks Good

    Looks good if you can get it on right. I messed up on the right side so I had to pull the whole thing off. Im getting the caps this time so Im guaranteed success.


    Helpful (0) (2)

  • 3/5

    February 13, 2011

    Very frustrating..

    I ended up reordering the tint and had a "better" experience with it... it is very hard to install and since im a perfectionist, it is hard for me to ignore the bubbles and wrinkle in the film.. still not a precise cut but was able to make it work. From far away I LOVE it.. but up close.. not s much which is why i gave it 3 stars.. good luck to those of you who get this.. take you time!


    Helpful (1) (6)

Related Mustang Categories