How to install Lowering Springs on your 2011-2013 Mustang

Tools Required

  • Jack & Stands (or access to a lift)
  • Metric socket set with at least size 10, 13, 15, and 18mm sockets (deep well preferred)
  • Metric wrenches in size 10, 13, 15, 17, 18, and 21mm
  • T40 TORX bit for socket wrench
  • Spring compressor
  • Torque wrench(s) ranging from 14 lb-ft to 166 lb-ft
  • Vice
  • Piece of chalk
  • Rubber Mallet
  • Impact wrench with impact sockets in above sizes
Installation Time: 2 Hours