Talk to a Mustang Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

VMP Dual Fuel Pump Voltage Boosters; Plug-and-Play (13-14 GT500)

Item 390029
AmericanMuscle no longer carries the VMP Dual Fuel Pump Voltage Boosters; Plug-and-Play (13-14 GT500). Please check out 1979-1993 Foxbody Mustang Fuel Delivery & Injectors for an updated selection.
Verify parts fit and get product recommendations.
Mustang Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • More Fuel for More Power
    • Continuous 17.5v Output (40A) - Always Active
    • Stabilizes Voltage
    • Increases Flow Rate
    • Supports up to 1000HP (850RWHP) on E85 with ID1000s
    • Plug-N-Play Wiring Harness - Easy Installation
    • Fits 2013-2014 Shelby GT500 Mustangs with Dual Fuel Pumps

    Description

    More Fuel for More Power. Is your GT500 Mustang making more power than your stock fuel pumps can handle? Don't replace them, enhance them with a set of VMP Dual Fuel Pump Boosters. By installing a set of VMP's Dual Fuel Pump Boosters you can dramatically increase the flow rate of your stock fuel pumps without the need of replacing them. These Fuel Pump Boosters are capable of supporting up to 1,000 Horse Power (850RWHP) on Shelby's running E85 fuel with Injector Dynamics High Impedance ID1000 Injectors.

    Always Activate. The factory fuel pump driver modules (FPDM) feature a pulse width modulated voltage design. Your Mustangs ECU supplies a variable voltage signal to the FPDM's, so they only use the minimum voltage necessary to maintain the desired fuel pressure. VMP engineered their Fuel Pump Boosters to run a constant 17.5 volts (40A) to the FPDM's, compared to the stock variable 14.5 volts, to ensure that your GT500's pumps are always on and running. Seeing that the VMP Fuel Pump Booster is always active there is no need for any additional power wires or pressure switches.

    Plug and Play Installation. VMP's Dual Fuel Pump Boosters feature a simple plug-and-play wiring harness that does not require any cutting or splicing of the factory wiring. The plug-and-play design allows the Dual Boosters to be easily installed or removed if necessary. These VMP Fuel Pump Boosters are to be installed inside the trunk next to the Fuel Pump Driver Modules (FPDM).

    Required Upgrade. For proper operation and maximum power potential this VMP Dual Fuel Pump Booster Kit will require reprogramming the vehicles computer. AmericanMuscle recommends a custom tune with a Mustang Handheld Tuner to reprogram the vehicles computer (ECU) for proper operation.

    Application. This VMP Plug and Play Dual Fuel Pump Booster Kit is specifically designed for use on 2013 to 2014 Shelby GT500 Mustangs equipped with dual fuel pumps.

    Note: Coupon codes cannot be applied to this product.


    This product will not ship to addresses in California due to state regulations. Additionally, support will not be provided for tuning for California residents.

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (2) VMP Fuel Pump Boosters
    • (2) Plug & Play Wiring Harnesses
    • 30 AMP Fuse

    Tech Specs

    5.0

    Customer Reviews (1)

      Brand Image

      Reviews of VMP Engine products have an average rating of 4.8 out of 5

        Questions & Answers

        10 More Questions

            Related Mustang Categories