Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping on Everything. Seriously. Details

How to Install a Whiteline Front Control Arm Brace on your 2005 to 2010 Mustang

Installation Time

1 hours

American Muscle
Shop Parts in this Guide

Fitting Instructions:
Please read complete fitting instructions and check kit components prior to fitment. These instructions are to be used in conjunction with workshop manual. It is recommended that all work be carried out by a qualified technician.
1. Undo front swaybar chassis mounts, and move swaybar back and away from its mounts.
2. Place new brackets in position between chassis mounts and D-bushes.
3. Re-fit swaybar and tighten to manufacturer’s torque specification.
4. Place alloy brace in position, using new brackets as the front mounting and cross-member holes near lower control arm front bush as the rear mounting. Secure using hardware supplied. Recommended torque setting 60Nm.
5. Check & re-tension all fittings again after 100km’s but no more than 200km’s.


This guide applies to Vehicle years: 2005, 2006, 2007, 2008, 2009, 2010 and Submodels: Bullitt, V6, GT, GT500