WIN $5,000 For Your Mustang! Enter Now
Talk to a Mustang Expert
1-888-332-7930
Mon-Thu 8:30a-11p, Fri-Sun 8:30a-9p

Free Shipping on Everything. Seriously. Details

Yellow Fog Light Tint (13-14 GT)

Market Price $32.99 You Save 9% ($3.00)

$29.99 (pair)

FREE Shipping
  • Item 26338
In Stock Ships same business day. Choose options to add to cart

Features & Details

  • Sleek Stealthy Styling
  • Yellow Appearance
  • Durable 5 Mil PVC Vinyl Tint
  • Optically Clear with a Gloss Finish
  • Protective Film Prevents Scratches During Installation
  • Pre-Cut for Easy Installation
  • Allows Fog Lights to Shine Through
  • Sold as a Set of Two
  • Fits All 2013-2014 GT Mustangs
Aggressive Styling. Finish off the aggressive styling of your Mustangs front end with Yellow Fog light Tint from AmericanMuscle. This AmericanMuscle Graphics Yellow Tint will give your Pony impressive styling that looks great on both the street and the strip.

Perfect Fit Guaranteed. AmericanMuscle Graphics vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure a perfect fit every time.

Pre-cut Vinyl Tint. These Fog Light decals are precision cut from durable yellow vinyl for a perfect fit and impressive good looks.

Superior Quality Materials. AmericanMuscle Graphics uses only the highest grade of 5 mil cast vinyl tint available on today’s market. This 5 Mil thick lens tint is designed for lens tints. Compared to other products that were designed for window sign displays that are thinner. They also are not forgiving to install on the lights compound curve. The film is also breathable and self-healing polyvinyl film. The tint comes with 3 layers: protective layer, tint film layer, and backing layer. The protective layer protects the tint film during installation and is removed after installation. Our vinyl is rated for continual outdoor use without shrinking or degradation for up to 5 years. Thicker 5 mil vinyl remains flexible during installation to reduce the chances of wrinkling, yet still transmits 80% of light.

Impact Protection. AmericanMuscle Graphics 5 mil thick poly vinyl tint is breathable and features self-healing properties to provide good impact protection against stones, gravel and small road debris, all while still transmitting 80% of the light. A must for a daily driven vehicle.

Easier To Install. AmericanMuscle Graphics vinyl designs are not only pre-cut for a simpler installation, but our 5 mil smoked cast poly vinyl tint is extremely flexible allowing it to easily conform to complex compound curves without wrinkling and the clear permanent solvent polyacrylic adhesive backing will ensure that it stays securely in place. The tint comes with 3 layers: protective layer, tint film layer, and backing layer. The protective layer protects the tint film from scratches during the installation process and is removed when done.

Application. This high quality AmericanMuscle Graphics Yellow Fog Light Tint is specifically designed to fit the 2013 to 2014 GT Mustangs equipped with the factory fog lights.

Fitment: 2013 2014 Details

What's in the Box
  • (2) Fog Light Tint
  • (1) Squeege
Installation Info
Will it fit my Mustang?
  • GT - 13, 14

Most Helpful Reviews

5/5
14 gt track pack

Excellent quality gave my gt that 24hrs of Lemans look. Had to remove bumper n grill to remove fog lights to do it correctly and it was worth it!

Helpful (1)

5/5
GT Fog Light Tint

No problem applying to glass lens. Used warm water as temp was chilly. Application went on vary well. Looks Super on my All black 014 G.T. Thank you and will be buying from you guys again!

Helpful (2)

Overall Rating 4.8 out of 5 stars
Read All 20 Reviews

Customer Photos (18) Submit Your Photo

View All 18 Photos

You Might Also Like

2 Questions / 7 Answers

Ask a Question

Do i have to take out the grill

robvill773

  • You do not need to remove anything to install this tint.

    Grandevil

    Good Answer (0) (0)

Show 2 more answers Question Resolved

Does the tint take away the brightness of the light?

SpecialK

  • The tint changes the operating color slightly but they are still very bright.

    Grandevil

    Good Answer (1) (0)

Show 3 more answers Question Resolved

More Products You Might Like

Customer Reviews (20) Write a Review

Overall Rating 4.8

out of 5 stars

Installation Time:Less than 1 Hour

Installation Cost:0-$100

  • Fit 4.736842 4.7
  • Appearance 4.894737 4.9
  • Bang For Your Buck 4.631579 4.6



  • 5/5

    Installation Time: Afternoon

    July 04, 2016

    14 gt track pack

    Excellent quality gave my gt that 24hrs of Lemans look. Had to remove bumper n grill to remove fog lights to do it correctly and it was worth it!

    MikeyV98

    Year: 2014 Submodel: GT

    Helpful (1) (0)

  • 5/5

    Installation Time: Afternoon

    November 22, 2013

    GT Fog Light Tint

    No problem applying to glass lens. Used warm water as temp was chilly. Application went on vary well. Looks Super on my All black 014 G.T. Thank you and will be buying from you guys again!

    Gregory65

    Year: 2014 Submodel: GT Maumelle, AR, USA

    Helpful (2) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    May 14, 2015

    2014 gt ruby red yellow vinyl inserts

    this vinyl was an easy install.. i didnt have to remove the bumper just front the top cover i removed the grille and the looks are mean

    tt5stealth

    Year: 2014 Submodel: GT tucson,az

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    March 16, 2015

    High Quality Product

    I decided that the best method for installation was going to be removing the removing the lights from the car then installing the film. To do this you have to remove the entire front bumper (just a warning). My results were fantastic! The tint is very thick and almost feels like the "self-healing" films. It should be very durable.

    EngiNerd

    Year: 2014 Submodel: GT Dallas, GA

    Helpful (1) (0)

  • 3/5

    Installation Time: Less than 1 Hour

    July 18, 2014

    Good Product, Install can be a pain

    First don't make the mistake i made, do not install with the lights still on the car. Remove them and individually install the tint so you can apply it correctly. Even so, due to the LED lamps in my fogs, (stock LED's) the tint caused the light to refract in a way that caused a weird line of light in the center of the tint. It was like this for both lamps...so i believe this was due to the tint not the install. I unfortunately removed them due to this as it did not go away over night. Overall i think a slightly thinner material would help...this was very think...may have caused too much light refraction.

    Rozwell911

    Year: 2014 Submodel: GT San Jose, CA, USA

    Helpful (1) (0)

  • 4/5

    Installation Time: Afternoon

    June 17, 2014

    fog light tint

    Can be an awesome product grill has to come off . Instruction on google . Cleaned with recomended water still has spots when veiwed closely at night.

    batman123

    Year: 2014 Submodel: GT Kentucky

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    July 09, 2013

    Nice touch

    Easy to install. Just follow the instruction and go for it.

    1OldGuy

    Year: 2013 Submodel: GT El Paso, TX, USA

    Helpful (1) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    March 01, 2014

    Looks great and easy to install.

    Some people like yellow fogs and some don't, but I have always been a fan of the Mustang GT's of the 60's that had yellow fog lamps. This tint is very high quality and very thick. The tint must be placed behind the fog light surround and here is the secret - use lots of soapy water on the lights, the tint, and your fingers! Once you have got them located correctly just squeegee the water out. I just used a credit card. Once you have most of the water out you may find that because the tint is so thick it will not want to lay down on the edges. Here's the second secret - use a hairdryer! Just use the hairdryer as you squeegee the last of the water out and the edges will lay down perfectly. My actual time spent in installing the tint on both lenses was no more than 15 min.

    TucsonDave

    Year: 2014 Submodel: GT

    Helpful (0) (1)

  • 4/5

    Installation Time: Less than 1 Hour

    February 22, 2014

    It's a great aesthetic

    really easy to install and I hate to say it, but I did have a few air bubbles. Not really large ones but I think that may have been because I was in a rush. Once they come on you can see a clear line about halfway the lens.... when off they look great.

    HauRuck13

    Year: 2013 Submodel: GT Carrollton, VA 23314, USA

    Helpful (0) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    January 31, 2014

    Great Old-School Apperance Mod!

    Ok, I'm an old guy and still remember the old-school 65-67 GT's with the dealer-installed yellow fog lamps. I've also always been a fan of the 70-71 challengers quad headlamps with the inside pair tinted yellow. So if you're like me and you'd like to complete the definitive old-school look of your 13-14 GT, get this tint! I bought this product when it was $20.00 higher than it's currently listed and it was money well spent!

    Scubafrog125

    Year: 2013 Submodel: GT Corvallis, OR

    Helpful (0) (1)

  • 5/5

    Installation Time: Less than 1 Hour

    October 31, 2016

    Looks Great

    Easy installation,didn't remove nothing,placed between the gap in the grille and light

    HOOK

    Year: 2014 Submodel: GT

    Helpful (0) (0)

  • 5/5

    July 30, 2016

    Perfect

    Simple product works and looks exactly as advertised no complaints.

    Mithrojin

    Year: 2013 Submodel: GT

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    May 14, 2015

    Its worth it

    I think its better than buying yellow bulbs looks the same acts the same

    zeek

    Year: 2014 Submodel: GT Dallas tx

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    October 17, 2014

    easy easy

    Purchased these to add a little color to the car, looks great and super easy to do. I got mine very wet so I could move it around really, I did not have to remove anything on the grill. Used the supplied squeegee to slowly, very slowly push the air bubbles out and held it down for a few seconds one I reached the edge, took about 15 minutes both sides, looks great

    nametaken

    Year: 2014 Submodel: GT New Lenox, IL, USA

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    September 14, 2014

    Install is as hard as you make it

    The tint feels very solid and well made. Its pretty thick. Install was tricky. The instructions you receive are general instructions for AM light tint. If you look at your 13/14, you'll notice the grille has two light bezels that do cover some of the lens. To install these clean the lenses well. Pulll gently on the grille and it will half pop out. From there, use your spray bottle and spray the lenses and spray your hands. Slide the tint from the gap you now have because of the grille and over the lens. Be careful and try not to touch the tint because its obviously sticky. Once you have it centered, then press down. Use the squeegee to her rid of water underneath the tint. Then pop the grille back into place with a firm push. This is all easier said than done and because of the general directions and being my first time, it took me like an hour and a half. If you need to start over and have to rinse the tint to get rid of fingerprints/dirt, use lukewarm water then use a blowdryer. The heat will re activate the glue. In the end, it looks awesome and as i said, feels like good tint. Im assuming this will last a while since I won't be touching it any longer.

    Aron226

    Year: 2014 Submodel: GT

    Helpful (0) (0)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: 0-$100

    August 27, 2014

    great look

    The yellow fog lights fit great and make my 14 mustang stand out from the crowd

    devlin66

    Year: 2014 Submodel: GT rio rancho

    Helpful (0) (0)

  • 5/5

    Installation Time: Afternoon

    August 27, 2014

    Yellow fogs....

    I was checking out AmericanMuscle.com when I came across the Yellow Fog Light Tinit. Looked like a great way to change the look in front cheap. And man did it ever... When I got the tint, I noticed right away it was a good quality, thick covering / tint. Instructions were good until I saw I was somehow just supposed to tuck the top and bottom of the tint under the fog light covering. I really didn't think this was going to look good in the long run, so, I took the extra step of taking the front bumper off to get easy access to the fog lights. This is why the installation is an afternoon. The front bumper is pretty easy to take off. Plenty of videos about how to do that online. The tint went on almost perfect. There were a few bubbles that I was angle to get out with the provided card. Once it was together, it looked Awesome! The tint adds a real nice look to the car. Its real cheap. The installation, if you take the front bumper off is time consuming. Overall I am very happy with the tint. Get it..

    AustinStang

    Year: 2013 Submodel: GT Austin, TX, USA

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    August 22, 2014

    Yellow fog light tint

    Just wanted to drop a note about the fog light tint from AM for my 2014 GT. Install was pretty straight forward. Just follow the instructions to the T. The part about using a little water as possible is very important. I may have used to much on the first fog light as I ended up with "blotchy" patches here and there. But I found that similar to window tint this film seems to breath and after three or four days in the 90 degree sun the film cleared up and you cant tell that its film at all. It actually looks like yellow lenses on the fog lights. Now if I could just get a smoking deal on the GT500 axle back exhaust from AM I would be set. Hint hint... ;-)

    SpikeJones

    Year: 2014 Submodel: GT So Cal

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    July 18, 2014

    YELLOW FOGLIGHT TINT

    EASY TO PUT ON, LOOKS GREAT, IF YOU LIKE IT ENOUGH YOU CAN GET THE ACTUAL YELLOW LIGHT BULB.

    MG22

    Year: 2013 Submodel: GT California, USA

    Helpful (0) (0)

  • 5/5

    Installation Time: Less than 1 Hour

    December 28, 2013

    Excellent Quality and Appearance

    I was really impressed with the quality of the vinyl here, it's thick, pliable, and tough. I cheated a little bit on the installation (it was 63 degrees and I didn't have a spray bottle) but they turned out great anyways. I used warm water and a lint-free towel to apply the water. I did NOT touch the sticky side with my finger tips and instead used the backing to handle the tint (slowly peeling away one side to apply and test placement). They look awesome! I'll be posting a picture too. It gives the Mustang that Leguna feel.

    Grandevil

    Year: 2014 Submodel: GT Wilmington NC

    Helpful (0) (0)

Related Mustang Categories