Guaranteed Free Delivery by 12/24! available on most items - Details

Talk to an Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P

Ask a question about the
BMR Upper and Lower Torque Box Reinforcement Braces (79-04 All)

Please tell us about your Mustang
Don't see Delete Question 1 of 3
Ownership does not affect chances of winning
Please complete your Mustang info

Questions must conform to the question guidelines or they will not be accepted.
Terms and Conditions

BMR Upper and Lower Torque Box Reinforcement Braces (79-04 All)

Stiffen up that 'Stang. The 1979 through 2004 Mustang was a beloved design not known for structural stiffness. With their sporty looks and affordable V8 power, these cars invited high-performance build-ups. That's when the weakness in the rear end of the Fox-body chassis became all-too apparent. The stock torque box and rear control-arm mounts can't take much power beyond stock. If you're building your Fox-body for performance, you need these BMR Upper & Lower Torque Box Reinforcement Braces. This bolt-on kit will stiffen up that rear end structure of the chassis, reducing upper and lower control arm deflection, and preventing the twisting and turning that can cause chassis damage in a high-powered Mustang. Turn your cruiser into a real crusher with help of BMR.

Serious Construction. These BMR braces are laser-cut from heavy-gauge steel. They're CNC-machined for a precise fit. When attached to the rear torque box -- where the upper and lower control arms attach -- they seriously stiffen the chassis. This prevents the destructive deflection and twisting seen in so many YouTube dragstrip videos. These braces are great not only for straight-line dragstrip 'Stangs: They also help the chassis performance and durability of any performance Mustang.

Basically Bolt-On. This BMR kit is essentially a bolt-on. All necessary hardware is included, with very little fabrication needed beyond drilling. For ultimate stiffness, they can be welded-in. The braces are shipped bare-metal with the expectation of possible welding. If you're not going to weld them, they should be spray-painted for rust prevention before install.

Application. These BMR Upper & Lower Torque Box Reinforcement Braces are designed for use on 1979-2004 Mustangs.