Increase Power and Performance. Further enhance the performance of your 2018-2019 6.4L HEMI V8 Dodge Challenger with an inTune i3 Platinum Tuner & PCM Swap Kit. The inTune i3 Platinum Tuner supports third party custom tune files and also comes preloaded with Diablosport's very own pre-configured tune files. When your Challenger rolled off the assembly line, it was programmed it to cater to the needs of the daily driver, not the performance enthusiast who adds aftermarket bolt-on modifications in the search of more power. So, if your Challenger is bone stock or if you have added a cold air intake, throttle body or exhaust mods, you should invest in a Diablosport inTune i3 Platinum Tuner to see the full power potential your Challenger can make.
User Adjustable. DiabloSport designed its Tuner to be user-adjustable. This means you can make further changes to the tune files to suit your particular performance needs. Please note that not all adjustments listed below are available on all vehicles.
- Calibrate Speedometer for Gear Ratio
- Calibrate Speedo for Tire Size
- Cooling Fan Control
- Disable ESP
- Throttle Booster
- Fuel Rich/Lean Adjustment
- Spark Timing Advance/Retard
- Idle RPM
- Top Speed Limiter
- Rev Limiter
- Disable Active Fuel Management
Built-in WiFi. The inTune i3 Tuner is WiFi-capable, meaning you will no longer have to plug it into your Mac, Windows or Linux computer to receive the latest Diablosport firmware updates, but that is still an option. Once setup with your Wi-Fi password, the inTune i3 will download the latest firmware updates via the internet.
Data Logging and Monitoring. With a full color, high-resolution touch screen display, the Diablosport inTune i3 Tuner makes it easy to read the Built-In Data Logging and/or the Real Time Data, so you can view popular sensor data such as EGT, Air/Fuel Ratio or any other 0-5 Volt source.
Diagnostics Tool. The inTune i3 Tuner can also be used as a diagnostic code reader. Save yourself hundreds of dollars each year by reading and clearing your own Diagnostic Trouble Codes (DTCs) rather than paying a dealer to do the same. It's as easy as a few simple steps.
Easy to Load; Easy to Restore. When you load your DiabloSport tune on your Challenger, the tuner automatically stores your vehicle's factory settings. To return to the original factory settings, just plug the tuner back in, select the option to restore the factory settings, and you're done. This is ideal for visiting dealerships for warranty work.
Not CARB Certified. The inTune i3 Platinum Tuner is not CARB certified, therefore it is not legal for use in California or any other state adopting California emission standards. Not intended for use on pollution controlled motor vehicles. If you require a tuner that is CARB certified please see Diablosport part# 8320-A.
PCM Swap. This PCM Swap Kit includes an inTune i3 Tuner and a one-time unlocked PCM cross shipment for your vehicle. This means you must exchange your locked factory PCM with a modified PCM from DiabloSport. Note: You must send your original PCM from the vehicle. Junkyard, Remanufactured, or Salvaged PCMs will not be accepted as core returns.
Application. This Diablosport inTune i3 Platinum Tuner & PCM Swap Kit is specifically designed for 2018-2019 Dodge Challenger models equipped with the naturally aspirated 6.4L HEMI V8 engine.