Guaranteed Free Delivery by 12/24! available on most items - Details

Talk to an Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P

Ask a question about the
Ford Performance Lowering W-Springs (18-20 GT w/ MagneRide; 15-20 GT350)

Please tell us about your Mustang
Mustang
Don't see Delete Question 1 of 3
Ownership does not affect chances of winning
Please complete your Mustang info

Questions must conform to the question guidelines or they will not be accepted.
Terms and Conditions

Ford Performance Lowering W-Springs (18-20 GT w/ MagneRide; 15-20 GT350)

Improves Handling Performance. Upgrading to a set of Ford Performance Lowering W-Springs will lower your MagneRide equipped Mustang's center of gravity, which will help to reduce squat during acceleration, body roll in the corners, and excessive nose-dive under hard braking. Ford's W-Springs are ideal for daily driving, street, and even occasional track use. Please note that the ride quality may be slightly harsher when compared to your original factory springs.

Aggressive Stance. Not only does a set of Ford Performance Springs improve the handling performance of your Mustang, but they also improve its overall appearance. By lowering the ride height approximately 0.78 inches (20mm) both front and rear, that huge tire to fender gap is eliminated, providing your Mustang with an aggressive muscular stance.

Linear Design. Linear springs (also known as standard rate springs) are engineered with a constant spring rate that stays the same as the spring compresses. This linear rate of compression allows for optimum traction and a more predictable handling feel at both low and high speeds. Linear springs will have a slightly rougher ride when compared to progressive springs. Linear rate springs are a popular choice for track and road course driven Mustangs.

Clears Stock and Aftermarket Wheels & Tires. These lowering springs were engineered to be compatible with your factory size wheels and tires, as well as AmericanMuscle's pre-configured wheel and tire combo kits (specific to your generation), to assure proper clearance with no rubbing issues.

Professional Installation Recommended. Seeing that a spring compressor is required for installation of these Coil Springs, AmericanMuscle recommends professional installation. With the proper tools installation can be completed in about three hours. Please note that an alignment is highly recommended after installation.

Application. This set of four Ford Performance W-Springs are designed specifically for use on the 2015-2020 Shelby GT350 and GT350R Mustang Models, as well as the 2018-2020 GT and Bullitt Mustang Models equipped with the MagneRide Suspension.

Application Note. These Springs are not intended for use on non-MagneRide equipped vehicles.