Guaranteed Free Delivery by 12/24! available on most items - Details

Talk to an Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P

Ask a question about the
JLT 3.0 Black Oil Separator; Driver Side (05-10 GT)

Please tell us about your Mustang
Mustang
Don't see Delete Question 1 of 3
Ownership does not affect chances of winning
Please complete your Mustang info

Questions must conform to the question guidelines or they will not be accepted.
Terms and Conditions

JLT 3.0 Black Oil Separator; Driver Side (05-10 GT)
Reduces Engine Sludge. Stop the formation of sludge in your Mustangs high powered engine by installing a JLT Version 3.0 Air/Oil Separator, more commonly know as a catch can. A JLT Catch Can will prevent crankcase blow-by, an oily exhaust vapor, from re-circulated back through your PCV system and intake. If left unchecked this oily vapor can congeal into a gummy mess know as engine sludge. Over time this nasty sludge will coat the inside of your throttle body and intake manifold robbing you of power and performance. A JLT Separator is ideal for use on all Mustangs whether they are a daily driver or a dedicated race car.

Version 3.0. JLT improved on the designed of their old Oil Separator with the introduction of their new and improved Version 3.0. The first big change you will notice is that the Version 3.0 Separator has a larger 3 oz capacity, that is almost double that of their previous model. Another important difference is the filter media. Older JLT Separators used a Ford Motorcraft pre-filter, but now JLT uses a 1/2" thick 1/16th" aluminum honeycomb filter with a mesh stainless steel screen to trap even more fine oil vapors than before to prevent them from gumming up your engine.

Superior Quality. This JLT Performance Air/Oil Separator is proudly manufactured right here in the USA. JLT CNC-machines their Air/Oil Separator from a solid block of billet aluminum for superior strength. Designed with a rubber o-ring, this Separator will maintain a tight leak-free seal. The base features a knurled texture, so that it can easily be gripped for removal during routine oil changes. JLT then completes their Catch Can in a durable black anodized finish for aggressive good looks and long lasting corrosion resistance.

Easy Installation. JLT Performance engineered their Separator to be installed in under 10 minutes with just basic hand tools. This kit comes complete and includes two PCV lines with stock-style quick-disconnect fittings that allow for an easy plug-and-play installation. All the necessary parts are included, with no cutting or extra modifications required.

Application. This JLT Performance Version 3.0 Black Driver Side Air/Oil Separator is designed for use on 2005-2010 GT and Bullitt models. Installs on the driver side, same side as the PCV valve.

Please Note. This Oil Separator will not fit on vehicles equipped with a FRPP manifold or vehicles with aftermarket fuel rails.

Technical Note. This JLT Air/Oil Separator is not CARB certified, therefore it is not legal for use in California or other states adopting California emission standards. It is intended for off-road use only.