Free Shipping On Orders Over $49. Details

Talk to an Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P

Ask a question about the
RAM Powergrip HD Clutch Kit; 23 Spline (11-14 V6)

Please tell us about your Mustang
Mustang
Don't see Delete Question 1 of 3
Ownership does not affect chances of winning
Please complete your Mustang info

Questions must conform to the question guidelines or they will not be accepted.
Terms and Conditions

RAM Powergrip HD Clutch Kit; 23 Spline (11-14 V6)
Street or Strip. Powergrip HD sets are the ultimate for extreme street/strip Mustang performance. And if you are replacing your clutch it is also a good idea to replace or resurface your flywheel at the same time to prolong the life of your new Clutch.

Superior Design. RAM Powergrip HD Mustang Clutch kits utilizes a proprietary 900 series friction material in conjunction with increased clamp load pressure plates, you get maximum holding power for track or street, with only minimal reduction in driveability.

Required Upgrades. To properly install this RAM Powergrip HD Clutch on your V6 Mustang you will be required to use either a RAM Billet Steel Flywheel (RAM 1545) or Billet Aluminum Flywheel (RAM 2545). You will also require a Pressure Plate Bolt and Dowel Kit and a Flywheel Bolt Kit. See options listed above.

Application. The RAM Powergrip HD Clutch kits are the performance clutch for big power street/strip Mustangs. The Powergrip HD Mustang Clutch is designed for the 2011-2014 V6 with the MT-82 transmission. Some chatter will occur on takeoff. Use only with RAM billet steel or factory nodular iron (explosion resistant) flywheels.

Specifications:
  • Fits: 2011-2014 V6 with a MT-82 Transmission
  • Disc Dimensions: 10.5" X 23T X 1"
  • Horse Power Rating: Up to 650
  • Includes: Pressure plate and clutch disc