Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $15,000!! Enter Now

Accufab 70mm Throttle Body w/ EGR Spacer (86-93 5.0L)

Item 15010
AmericanMuscle no longer carries the Accufab 70mm Throttle Body w/ EGR Spacer (86-93 5.0L). Please check out Ford Mustang Throttle Bodies for an updated selection.
Call a Mustang Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P

    Product Information

    Features, Description, Reviews, Specs & Installation

    Features

    • Fits 86-93 5.0L Mustangs.
    • 70mm diameter.
    • CNC cut solid billet aluminum construction.
    • Highly polished finish.
    • Includes 2" EGR spacer & gaskets.
    • Improved throttle response.

    Description

    Better Flow. Replace your 1986 - 1993 Mustang's restrictive 58mm or 60mm stock throttle body with this top of the line 70mm kit from Accufab and get your 5.0 the air it's been lacking. This 70mm kit includes a 2" EGR spacer and gaskets and makes an ideal addition to street-driven Mustangs and gives you a springboard for future mods.

    Exceptional Quality. Accufab's quality is second to none - this throttle body is CNC machined from billet aluminum, and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, and they use only the best components for unparalleled reliability and performance.

    Feel the Power. Bolt on horsepower and improve your throttle response with this easy to install throttle body and EGR spacer kit. This upgrade is the perfect starting point for future modifications and the ideal complement to a better flowing exhaust.

    NOTE: A 70MM Throttle Body is suggested for a stock or mildly modified 5.0. If you already have or are planning on more aggressive modifications, you may also want to consider Accufab's 75mm kit with EGR spacer.

    NOTE: Idle Speed should only be set by adjusting the Throttle Position Sensor. DO NOT adjust any screws on the Throttle Body. These screws are pre-set at Accufab.

    NOTE: Though a tune is not required after installation, you may experience some minor irregularities at idle. AmericanMuscle recommends a tune after installing any throttle body in your 5.0.

    Fitment:

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    4.9

    Customer Reviews (11)

    Write a Review

    Ratings Summary

    4.9 out of 5 overall rating from 11 customers

    Installation Time: Afternoon





    • September 06, 2013

      5 1992 Other - vnomous92 Installation Time: Afternoon

      Love the Accufab TB

      Since the TB was going on a show car, there is no other TB that compares to the look of the Accufab TB. I ordered the 70mm version as I already have some minor mods and what a difference! I barely touch the gas pedal and it wants to go! I put it on in conjuction with a BBK CAI and a Pro-M 75mm 'Bullet' MAF so maybe the combination works. Either way, the TB looks AWESOME and works like a charm!

      Helpful (10)
    • July 14, 2013

      5 1987 GT - jml2359 Installation Time: Less than 1 Hour

      suckin dat air

      great throttle response, seems to give car some added power but haven't put my car on a dyno, again not the cheapest throttle body but its real shinny

      Helpful (10)
    • February 13, 2013

      5 1991 Other - tims91vert Installation Time: Afternoon

      looks geat;well made

      great product really polished chrome, helped me pass inspection and it abolishes the TVR cable guesswork. it has a small hole. I just popped my TVR cable (automatic) in and they give you a rubber cap to lock it in. Soon i will work on ensuring it stays with another way to make sure the cable stays put.

      Helpful (9)
    • March 24, 2012

      5 1989 GT - ANTIRICER Installation Time: Afternoon

      Accudab 70mm TB

      Best throttlebody on the market hands down.I did have to get my tps set so it would run correctly tho.never knew anything about that until I got it installed. It doesn't have any of the whislings like the other aftermarket throttlebodies and the finish on it is incredible looking.

      Helpful (9)
    • February 06, 2012

      5 1989 GT - Bushmaster03 Installation Time: Less than 1 Hour

      Accufab Throttle body!

      One of the best bolt ons I did. The car sounds louder. Picks up quicker. Rpms stay up a lil longer (for automatics) and it just looks cool under the hood. Cool upgrade. Accufab is the best in throttle bodies. Go with this one.

      Helpful (12)
    • February 02, 2012

      5 1989 GT - AZZO Installation Time: Full Day

      Looks and performs great

      This product looks great and easy to install, once I got the old one off. Seems to have a slightly quicker throttle response. Did not really feel much of a performance gain, but did not expect one. This was bolted on to a stock intake. When I put a Trick Flow on I really should see a difference. *** Beware the old throttle was very hard to get off the intake. I do not think the throttle body was ever off the car. The studs were rusted and corroded, so it took lots of muscle and time to slide the throttle body and the spacer off the old rusted studs. I even need to us a small crow bar and a hammer to remove the old one. Would have like some directions, did not come with any, looked Accufabs web site for info.

      Helpful (11)
    • December 12, 2011

      5 1988 GT - Josh8850 Installation Time: Afternoon

      Direct bolt on power

      Really liked the easy installation of this product and the pollished crome look.The peformance gain and throttle response i gained without a tune was easily noticeable the first time i drove my mustang,and just the sound of the engine made it worth it to me.

      Helpful (9)
    • December 07, 2011

      5 1993 GT - MustangJoe Installation Time: Less than 1 Hour

      Accufab 70mm Throttle Body w/ EGR Space

      Very easy to install, did not take as long to install as I was told looks good, feel the improvement in throttle response I would recommend this to others, and I am very satisfied with the time it took to get & the quality of your serves. Thanks Joe 1993 Mustang Gt

      Helpful (9)
    • August 30, 2011

      5 1993 Other - Toon Installation Time: Afternoon

      Accufab 70MM Throttle Body w/ EGR Spacer is great!! and fits with no worries!!

      For the first time in 20 years the factory throttle body was changed and though it took me like close to an hour to take the old throttle body off, putting the new one on only took me matter off minutes. When you buy the Accufab 70MM Throttle Body w/ EGR Spacer you get gaskets, soo you dont need to buy anything else for it unless you want something else these gaskets did the trick for me.

      Helpful (9)
    • April 24, 2011

      5 1992 Other - Adolfo

      great "Chirpy" performance

      Very satisfied with its performance, way better than stock. I wish i would have come with instructions. The grinding didn't go so easy, but besides that, pretty much straight forward installation. I have no experience with BBK but this one for sure works real nice and looks really nice.

      Helpful (8)

    Questions & Answers (0 answers)

    No questions about this product yet.

    Ask the First Question

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (1) Throttle Body
    • (1) EGR Spacer
    • (4) Gaskets

    Tech Specs

    Throttle Body Specifications
    Bore Size: 70mm Single or Twin Blade: Single
    Year: 1986-1993 Model: 5.0L
    Material: Aluminum Finish: Polished Aluminum
    Manufacturer: Accufab Computer Tune Required: No*


        Related Mustang Categories