Win $17,760 For Your Truck! Enter Now!
Talk to an F-150 Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping! Get it by Dec 24th available on most items - Details

AEM Brute Force Cold Air Intake Kit (97-03 5.4L)

Market Price $402.49 You Save 13% ($52.50)
Starting At

$349.99

FREE Shipping
  • Item T529023
  • MPN# 21-8100DP

Will this fit your F-150?

Features & Details

  • Increased Horsepower
  • Tuned and Dyno-Tested to Improve Acceleration and Engine Sound
  • Low Restriction Aluminum Tubing
  • Easy to Install Using Commonly Available Tools
  • Air Filter Lasts up to 100,000 Miles Before Cleaning Is Required (Depending on Driving Conditions)
  • Washable and Reusable Oil-Free Filter Media
  • AEM Lifetime Limited Warranty
  • Fits 1997-2003 5.4L V8 F150, Excluding Lightning and 02-03 Harley Davidson
Extreme Power. Expand your truck's capabilities with this AEM Brute Force cold air intake. It's a capable system that adds horsepower and torque to your truck all at once. When installed you'll experience enhanced response and you might even enjoy improved acceleration as well. All these improvements come from an increase in air flow to your engine once installed. The product is a self-contained unit with a built in section for the MAF sensor, and it's made from tough materials that will hold up to hard use.

No Tune Necessary. This special AEM Brute Force cold air intake is designed to function without tuning being required. You can make use of the kit with a smaller investment for this reason. There's no reason to worry about tuning immediately. Sure tuning your truck will make it perform better, but you don't have to do it immediately or at all to get this intake working.

Long Lasting Filtration. The air filter used in this AEM Brute Force cold air intake is designed to last up to 100,000 miles before you have to clean it out at all. This won't always be the case in particularly dusty locations, but it is a dry filter that features synthetic fibers that blow out easily.

Built for Strength. This AEM Brute Force cold air intake is designed to weather harsh temperatures and moisture conditions over time. The intake pipe is made from durable aluminum that features a wide interior diameter. The heat shield on this unit is made from coated steel and is made to last as well. There are also several rubber grommets and connectors and some stainless steel clamps that come together to make this unit function properly.

Fast Installation. There's no extended waiting period with this AEM Brute Force cold air intake. It can be put in place and made to function in just a single hour. That makes it very convenient and simple to make use of overall.

Lifelong Warranty Coverage. This AEM intake kit comes complete with a lifetime limited warranty that you can count on to keep you safe and secure over time. Your part is covered and you can rely on that coverage.

Application. This AEM Brute Force Air Intake System fits 1997-2003 Ford F150s equipped with the 5.4L V8 engine, excluding Lightning and 2002-2003 Harley Davidson models.

Note: Coupon codes cannot be applied to this product.

Fitment: 1997 1998 1999 2000 2001 2002 2003 Details

What's in the Box
  • (1) Hose, Adapter 4.00/3.00x3"
  • (2) Hose, Adapter 4.00/3.50x3"
  • (1) Upper Pipe
  • (1) Lower Pipe
  • (1) 1 1/2" Bnd. Hose clamp, 2.90"-3.75"
  • (2) 1/2" Bnd. Hose clamp, 3.15"-4.00"
  • (4) 1/2" Bnd. Hose clamp, 3.56"-4.50"
  • (1) Grommet, 1/2"
  • (1) Air Filter Assy. 4.00 x 9" Dry Ele.
  • (1) Hose; 5/8"ID x 22"L
  • (1) Hose; 3/4"ID x 26"L
  • (2) Hose Clamp, 1 1/16"
  • (2) Hose Clamp, 1 1/4"
  • (2) Hose Clamp, 3/4"
  • (1) Connector, Plastic 3/8" Straight
  • (1) Hose; 3/8"ID x 10"L
  • (1) Heat Shield
  • (1) Adapter, MAF, Bolt On
  • (1) Rubber Edge Trim 11"
  • (1) Zip Tie, 8" Tree Push-MNT
  • (1) Gasket, MAF Adapter
  • (1) Rubber Edge Trim 8"
  • (4) Bolt, Hex/Flange M6-1 x 20
  • (4) Nut, M6 Hex Serrated
  • (4) Washer, M6 x 12mm OD Zinc
  • (2) Washer, 6mm Soft Mount
  • (2) Washer, 1/4 SAE Flat
  • (2) Bolt, Hex 1/4-20 x 1 3/4
  • (2) Nut, 1/4-20 Nylock
  • (2) Nut, 1/4-20
  • (2) Stand, Aluminum
Installation Info
Will it fit my F-150?

Customer Photos

You Might Also Like

Q & A

No questions about this product yet.

Ask the First Question

More Products You Might Like

Reviews

Related F-150 Categories