Win $17,760 For Your Truck! Enter Now!
Talk to an F-150 Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

2 More Days for Free Shipping! Get it by Dec 24th available on most items - Details

AEM Electronically Tuned Intake System - Polished (2010 5.4L, Excluding Raptor)

Market Price $601.44 You Save 13% ($78.45)
Starting At

$522.99 (kit)

FREE Shipping
  • Item T527339
  • MPN# 41-1101P

Will this fit your F-150?

Features & Details

  • Electronically Tuned Intake Kit
  • Adjusts for Proper Air Density Reading
  • Estimated 16.6 HP Gains at 4600 RPM
  • Includes a DryFlow Synthetic Filter
  • Polished Aluminum Tube
  • Washable and Reusable Filter
  • Made in the USA
  • 50 State Legal for Street Use
  • Fits 2010 5.4L F-150s, Excluding Raptor
Bolt-On Power and Engine Dress-Up in One Intake Package. More cold oxygen filled air means red-hot performance when it’s delivered reliably to your 2010 F-150’s 5.4L engine – a task the AEM Electronically Tuned Polished Intake System excels at. You’ll feel that extra power thrumming in your truck’s engine the first time you turn it over after installing the AEM intake – enjoying big gains of +16.6 horsepower and +20.2 torque ft-lbs. These gains are thoroughly dyno tested and proven as part of AEM’s quality development process. This handsome filter with its mirrored intake tube is designed for toughness so it’ll serve you well in the long haul.

No Tuning or Flashing Needed. This component comes pre-tuned to use the stock MAF (85mm) to run at a powerful capacity in the AEM Electronically Tuned Polished Intake System. As such, no additional aftermarket tune is needed, and you can leave the factory tune undisturbed on the ECU. The intake is also compatible with most performance tunes, however, even if it it does not gain additional power from them.

Oversized Oil-Free Reusable Filter. The big non-tapering filter element used in the AEM Electronically Tuned Polished Intake System measures 7” in height and is made from a non-woven synthetic material in a dark red color. Though this is lessened by constant driving in dust, dirt, or sand, the filter can go for as much as 100,000 miles before it needs a cleaning. To spare you expense and delay, the filter element can be repeatedly washed and reused in the intake system. It is a dry, oil-free filter.

High Polish Aluminum and Black Steel Build. The AEM Electronically Tuned Polished Intake System features a brightly polished aluminum intake tube with high-flow mandrel bends and a good diameter. The aluminum tube serves both to prevent rust or corrosion, and to improve the system’s looks once installed. A large-capacity synthetic filter fronts on this tube, with a black textured powder-coated steel heat shield to keep engine heat away. Six steel clamps are included.

Accommodates the Factory MAF. The MAF housing of the AEM Electronically Tuned Polished Intake System is made to fit the stock MAF, with electronic tuning to match it to the bigger diameter. There are also fittings for the PCV hose.

Installs without Drilling or Modifications. Installation of the AEM Electronically Tuned Polished Intake System is very direct and rapid, often under an hour. The component needs no drilling or cutting for fitment and bolts onto the existing attachments with the included hardware.

Limited Lifetime Warranty. Your investment in the AEM Electronically Tuned Intake System is protected by a limited lifetime warranty from the manufacturer. Please see AEM’s site for specific details of warranty coverage.

Carries CARB EO Number. An F-150 outfitted with the AEM Electronically Tuned Intake System can roll out 100% legally on the streets in all 50 states. The component is fully CARB compliant (CARB EO Number #D-670-15), so that it can be driven on the street or highway in California and other places using CARB. Be certain that the CARB compliance sticker is clearly visible on the intake to avoid problems during vehicle inspection.

Application. The AEM Electronically Tuned Intake System is specifically designed for use in 2010 Ford F-150 equipped with a 5.4L engine. Does not fit on the 2010 5.4L Raptor.

Note: Coupon codes cannot be applied to this product.

Fitment: 2010 Details

What's in the Box
  • (1) Air Filter
  • (1) Heat Shield
  • (1) Inlet Tube
  • (1) Overflow Bottle
  • Installation Hardware
Installation Info
Will it fit my F-150?

Customer Photos

You Might Also Like

3 Questions / 3 Answers

Ask a Question

Would this fit on any other Ford F-150 models such as a 2009?

ChaseY

  • This specific AEM Electronically Tuned Intake System is only intended for use with a 2010 5.4L F-150.

    AMKody

Helpful (0)

Is this product for a 5.4L V8 3V engine?

Anonymous

  • This will fit 5.4L V8 engines with the exclusion to the F150 Raptor trucks.

    KevinD92

Helpful (0)

Can you still use a tuner w/ this product since it is already electronically tuned? Thanks,

meathead

  • You will still be able to use a tuner with the AEM Electronically Tuned Intake System - Gunmetal Gray (2010 5.4L, Excluding Raptor).

    Ricky36

Helpful (0)

More Products You Might Like

Reviews

Related F-150 Categories