Win $17,760 For Your Truck! Enter Now!
Talk to an F-150 Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

3 Days Left for Free Shipping! Get it by Dec 24th available on most items - Details

Airaid Cold Air Dam Intake w/ Red SynthaMax Dry Filter (04-08 5.4L)

Market Price $440.77 You Save 13% ($57.50)
Starting At

$383.27

FREE Shipping
  • Item T102337-D
  • MPN# 401-140-2

Will this fit your F-150?

Features & Details

  • Improves Airflow for Better Performance
  • Black High-Density Polyethylene Intake Tube
  • Dry - SynthaMax Filter Included - Red
  • Filter is Washable and Reusable
  • Reuses the Factory Intake Box
  • NO Computer Re-Tune Required
  • CARB EO # D-609-18
  • Fits 2004-2008 5.4L F-150s
Overhaul Your Engine. Drive faster and more capably with a bit of help from this Airaid cold air dam intake kit. It's designed to deliver as much cold air as possible right into the heart of your pickup's engine. That means it will literally put out more horsepower and torque while staying the same exact engine. That's a major benefit of this kit and why it makes sense to invest in it. If you're looking for a simple way to get more out of your pickup, this tough little intake kit is the way to go.

Tuning isn't Necessary. Since intake kits often change up the amount of oxygen that's going to the truck's engine, it's necessary for you to adjust the tuning of the engine. That isn't a concern with the Airaid cold air dam intake. Although you're getting some more oxygen with each cycle of the engine, it performs fine without a tune up. Sure tuning your computer will make the truck work even better, but if you don't have the time or money to do it you can use this kit still.

A Leading Filter. The quality of the air filter makes a big difference for the intake kit. A good filter lets air flow in quickly while blocking all the major particles. That's exactly what the red filter does on this Airaid cold air dam intake. It's a Synthamax filter that blocks the tiniest little particles with its synthetic woven fiber, and the large items are stopped by oiled cotton fibers. Together the two materials capture just about everything. The best thing about this kit is that you can wash it off, oil it down and use it all over again as many times as you would like.

Built to Last. Most people don't think of plastic as durable, but this kit is made from a very hard plastic that will hold up well for years. It's called polyethylene and withstands vibration, heat, grease, chemicals and other wear without issue. The plastic is black, it looks nice and will help insulate your intake while delivering the maximum power to your engine.

Just an Hour. Other intake kits take hours to put on, but not this one. The Airaid cold air dam intake goes on in an hour using basic hardware and a straightforward install process. It's something that can be done at home, but it's faster at a garage.

Good for a Lifetime. When you buy the Airaid cold air dam intake with the red filter you can count on it lasting for a lifetime. That's because Airaid literally covers it for a lifetime of use with an extensive warranty. What better protection could you ask for than blanket coverage for the whole part?

Legal in All States. Thnaks to CARB EO number D-609-18 this intake kit is legal for use in all 50 states. It passes emission tests and can be counted on no matter where you live in the country.

Application. This Airaid Cold Air Dam Intake with the SynthaMax Dry Red Filter is specifically designed to fit on the 2004 to 2008 F-150s powered by the 5.4L V8 engine

Note: Coupon codes cannot be applied to this product.

Fitment: 2004 2005 2006 2007 2008 Details

What's in the Box
  • (1) Premium Filter
  • (1) Filter Adapter
  • (1) MAF Panel
  • (1) Bottom Panel
  • (1) Intake Tube
  • (1) Urethane Hump Hose
  • (1) Driver Side Bracket
  • (1) Passenger Side Bracket
  • (1) 26-1/2" Weather Strip
  • (2) 8-32 x 3/8" Button Head Screws
  • (7) 6-32 x 5/16" Screws
  • (7) #6 Flat Washers
  • (7) 6-32 Kep Nuts
  • (6) 1/4-20 x 1/2" Button Head Bolts
  • (15) 1/4" Flat Washers
  • (8) M6-1x25 Hex Bolts
  • (2) 1/4" Lock Washers
  • (2) M6 Hex Nut
  • (1) Long/Narrow Bracket
  • (1) Rubber Grommet
  • (1) 4" Rubber Trim
  • (2) #72 Hose Clamps
  • (1) L-Shaped Bracket
  • (1) Hose Mount
  • (1) T-20 Security Bit
Installation Info
Tech Specs
Cold Air Intake Specifications
Year/Model: 2004-2008 5.4L Filter Placement: Engine Bay
Material: High-Density Polyethylene Finish: Black
Manufacture: Airaid Computer Tune Required: No
Will it fit my F-150?

Customer Photos

You Might Also Like

Q & A

No questions about this product yet.

Ask the First Question

More Products You Might Like

Customer Reviews (1) Write a Review

Overall Rating 5.0

out of 5 stars

  • Performance Gain 5 5
  • Fit 5 5



  • 5/5

    September 29, 2017

    Awesome!!

    Perfect!! was happy, easy install recommend it to others.

    specs2010

    Year: 2005

    Helpful (0)

Related F-150 Categories